Dynamic animation of 'Rectangle' work is not since the CC update

Similar Questions

• notification of WhatsApp works do not since the recent update

  Since the recent update, which enabled the monitoring of sleep, that I do not see notifications whatsapp over on the talk smartband.

  Yes. Last update works well and now it does not work.

• X 220 hotkeys not working do not since the system update

  Hello

  I used the system update this morning and checked all the updates, including the newest driver Intel for my X 220. After that, most of the Fn keys and the info on the screen has stopped working. I uninstalled the Intel driver and Hotkey driver and install again, but the problem was still there. Now, I even uninstalled all the software Lenovo without driver and system update to install brand new, but the keys still don't work.

  Do you know if it is a general problem with the latest Intel driver? Or this have to do with some other update?

  Thanks for your replies!

  Uncaught,

  Try to uninstall hotkey, Power Manager and power management driver, then perform a reboot, and then install the driver power power management, Power Manager, and hotkey.

  See if it helps.

  JMT

• OfficeJet pro l7780 wireless works do not since the firmware update

  Is there a restore utility for an update of the firmware?  I have updated the firmware on my Officejet pro L7780 AIO hoping to solve a problem of scanning; However wireless capability has since stopped working.  I tried a static ip address - disconnect the power supply, check that the SSID and password, etc..

  The wireless network Test report page. RADIO ON IS PASS, RADIO WORK = FAIL, PASS = NOT CONNECTED ETHERNET CABLE.

  The previous Firmware before I upgraded was: R0040xxNxeN0; The version of the installed software package now is: R2011NxNxeN0.

  The printer works with a straight ethernet cable to my router Netgear Rangemax Wireless model WPN824v2. However, it seems that I can only access the printer from my laptop through my desktop computer (which is networked via ethernet to the router) wireless - and the desktop computer must be powered.

  (PS; Update does not solve problem of scanning)

  Hello world

  I increased my support to management and after having crossed some tests additional etc, it was determined that my problem is, indeed, a hardware failure.  HP offered me a replacement refurb for $245 includes taxes & shipping in both directions, as I mentioned in my last thread, they don't sell parts for this model, that's why I decided the lesser of two evils... spend more money & buy new or take the offer... I take the offer.

  Thanks for your help.

  TinyJo

• P7-1174: sound card not working do not since the upgrade to 10. Can not find the driver to download

  Since the upgrade to Windows 10, my speakers do not work.  They seem to be good and have been working well before 10.  I can only find a driver for the sound card and I get a message that it can not be downloaded for my protection.  Any thoughts?

  Hello:

  See if this driver works for you...

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp70787.exe

• Lightning helmet works do not since the update

  Hey all, since the update this morning which I believe was supposed to fix a few problems with the remote lightning helmet, my helmet doesn't quite work. When I plug them into my phline (7 more) just continues to play through the internal speaker. Anyone having this problem?

  Restart your device by holding down the home and power button until the Apple logo appears. Which tends to solve many mysterious problems.

• Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10

  Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.

  Return you to W7.

  I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.

• HP Laserjet 4200 works do not since the installation of wireless N300 router

  I set up a new computer with Windows 7 and connected to the existing router.  There was a HP LaserJet 4200 connected to the router as well.  This configuration worked.  I installed a new wireless router Netgear N300 connecting the computer and the printer to the router with a Cat5 cable.  I manage not to print (or ping) the HP LJ4200.

  I am able to get out to the internet through the router with cables Cat5 on 3 computers and wireless on 1 computer to the router works.

  Any ideas on what I'm doing wrong with the configuration of the printer?

  I set up a new computer with Windows 7 and connected to the existing router.  There was a HP LaserJet 4200 connected to the router as well.  This configuration worked.  I installed a new wireless router Netgear N300 connecting the computer and the printer to the router with a Cat5 cable.  I manage not to print (or ping) the HP LJ4200.

  I am able to get out to the internet through the router with cables Cat5 on 3 computers and wireless on 1 computer to the router works.

  Any ideas on what I'm doing wrong with the configuration of the printer?

  It's probably a mixup between the IP address or subnet assigned by your previous router and the new router.  Print a network configuration of controls on the front panel of the printer page to see how it is implemented.

  1. Press (select) to open the menus.
  2. Use (up arrow) or (down arrow) to scroll to INFORMATION and press on (select).
  3. Use (up arrow) or (down arrow) to access the PRINT SETUP, and then press on (select).

  Now take a look at the network configuration of your computers.

  Start > cmd (run as admin) > OK
  ipconfig/all {Enter}

  Your printer's IP address must be in the same subnet as your computer.  For most routers, this means that the first 3 octets must be identical.  The Netgear N300 use 192.168.1.xxx, so your printer's IP address MUST be 192.168.1.x, where x cannot be 1 (the address of the router itself) or a number assigned to a computer.  If you have the printer set to "obtain an IP address automatically", the router will choose an appropriate IP address.

  However, printers are often configured to use static IP addresses.  Even if it is better, if your printer has been configured to use a static IP address with the previous configuration of your network, it may not be compatible with your current network.

  You should also check to see what looking for computers.  My box of Windows 7 is not available at the moment, but I think that the procedure is similar to XP:

  Open Printers and faxes and right click on the printer in the network.  Select Properties.  Click the Ports tab.  The port of the printer should already be highlighted, click on Configure Port.  Look in the box "printer name or IP address."  If it shows an actual IP address, this means that the printer will only search the printer at this address.

  If the address has changed (see above), the computer will not find the printer.  If there is a 'printer name' in the box, the computer "should" find the printer... but maybe not able to do so for a variety of misconfiguration.  This is why it is best to use static IP addresses for printers... but be careful that the printer is set to an IP address that is appropriate for your network, and that the computer knows that he has to use this address to find the printer.

• Screen Mode shortcut not working only not with the recent update

  Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.

  Any ideas?

  Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.

  In any case, fixed now fortunately! I appreciate the help.

• Drag and drop from Illustrator to Photoshop not working only not with the last update... Any ideas that can do about it?

  For example, I have a file of newspaper advertising open (as in Illustrator) .ai and I want to use the logo from here and place it in a .psd file (banner that I do in Photoshop). Before that I selected just Illustrator logo/layer and drag droped to Photoshop. This logo would be recognized as a smart object in Photoshop. Now, this is not possible. I'm working on Windows 10 x 64 and this problem occurred with the last update of Photoshop.

  Hi kristijan_st,

  Please see the article below relates to the last update for Photoshop.

  This article is not directly editable in Photoshop...

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Mozilla Firefox 13.0.1 - Gmail works do not since the update

  Hello

  I got an update for Mozilla Firefox over the weekend, and since then, he's not working 100% correctly. I have version 13.0.1

  I use gmail, but now can't seem to log on. I can get to the page, log in no problem, but when I have my details it tries to connect but nothing that really happens (you can see 'connection... ("with the circle in the field title tab, it seems to be something, but nothing is really happening).

  Sometimes I get «loading [email protected]...» "with the progress bar slot, but the bar stays clear all the time. I don't even get that much, sometimes it is on the login page, even if the connection circle moves, sometimes it changes just a blank page.

  There was once when I got to the Inbox, but only the HTML version (you know one you get if you have a slow connection), but then I actually can't open my emails and eventually left the game. This has not happened since.

  I also use another account with gmail for work (which we use by logging in via a portal on our website) and have been having a similar with this problem only that sometimes the pop-up that appears just pops up as a topic: blank tab.

  Refresh the page (for an account) does not appear to have any effect.

  I can work around the problem for now by using IE, but for a variety of reasons, I prefer to be able to use Firefox.

  Is there a way to solve this? I looked here http://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?s=firefox+13.0.1+gmail+problems & r = 4 & e = you & as s = and updated my Windows Firewall put Mozilla in exceptional, but appears not to have made a difference.

  This applies also to other Google stuff like the calendar.

  I'm not having problems with other sites.

  I use AVG for my anti-virus, but the Windows Firewall.

  Thank you

  Hello loonyloo, thanks for the reports with the details of your system. Please enter Subject: config in the location bar, search for all the preferences that begin with network.http. and are set to a custom value (= in bold). Please, do a right-click and reset these settings - particularly network.http.keep - life must be set to true, so that the pages encrypted with google again to load normally.

• Audio not working do not since the installation of SP3. Get the error code 10

  Original title: when I installed windows xp 3 pk audio does not work when I try to install audio, s says error code 10 please help

  I'm trying to get audio on my laptop dell, I installed windows xp and it never give me audio with the package and when I try to install it it says error code 10.  I'm doing my wireless laptop please help with instructions.

  Hi ChristopherCrennell,

  • How you are trying to install the audio driver on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Gmail works do not since the IE 9 download

  I tried to go back to IE 7 but the system would not allow because IE 9 is already installed.  IE 9 is a train wreck.  I tried to use compatibility mode, which has been proposed to solve the problem, but it did not help.  I'm afraid to download Firefox (recommended as a "fix") for fear of the problem of mixture.  Any suggestions?

  Well, I just went to "tools/compatibility view settings" and unchecked "throughout Displaly in compatibility view. now gmail works fine. Make sure that Google.com is not the checkmark in the field above.

• Mute turns do not Off / Audio doesn't work don't not since the last update of Windows 8?

  I don't know if it is caused by the update of Windows 8 for a few days, but the problem started around then.

  The audio on my laptop does not work. The 'secret' remains switched on, even when I press the physical keyboard button to activate the sound and try to activate the sound with my mouse in the menu volume. Nothing to audio.

  Laptop is a HP Pavilion dv6 Notebook PC running Windows 8 Pro 64 - Bit.

  I've seen other people mention a problem like that recently. Any help would be appreciated.

  Hello world

  There are a few troubleshooting you can do for this issue and a work around. One of my colleagues has posted the troubleshooting steps and work autour from here.

  Thank you

• SHAREit worked before, but since the last update of what YOGA can not find every laptop

  Hello

  I used SHAREit twice with good results (may 2015)

  I tried to use it in early August and earlier, n the YOGA 2 1380 pro cannot find the laptop more although they are 20 cm from each other.

  Version of Windows is different from Android. I already uninstalled the Windows version to a newer version without result.

  And another Member, I just tried to help her by suggesting ShareIt also cannot establish the connection.

  And I see no option to ignore updates.

  All solutions?

  Thank you

  Hello

  I just tested the new version, go to/from my YOGA 2 1380F pro, my A520 AIO, and there is no problem.

  SHAREit A520 AIO, window 8.1, version 2.5.1.1 (SHAREit Info)

  YOGA 1380F pro 2, Android Kitkat, SHAREit Version 2.8.8_WW

  One thing to check is if the WiFi Yoga tape is set to Auto (both bands), or at least updated the corresponding band of the PC.

  IIRC, the PC needs to be connected to any wireless network, although the WiFi it must be turned on and not in airplane mode.

  After an update, you may need to re-pair connection of old/exsiting, by making that stupid 'number' correspondence between the two devices.

  In addition, on the PC, there should be an Easyplus Hotspot Lenovo, showing in monitor resources on the 'networks' tab.

  

  See you soon

  DragonRider