Dynamic resizing of the cluster
Is is possible to resize the cluster with buttons dynamically? I mean during run mode? If it's possible could you give me some suggestions?
Kind regards
Izabela
Oh... Sorry... you may need to enable scripting.
See here: http://decibel.ni.com/content/docs/DOC-4973
Tags: NI Software
Similar Questions
-
Just a quick question about the appearance of the cluster
Hello, this is Matthew, just a quick question about the appearance of the cluster
Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...
What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".
Is there a quicker way to deal with?
THz so much!
You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.
-
support of dynamic resizing stamp
We use dynamic stamps on the forms within our Organization. However, how do you define preferences on stamps - size, color, etc.
We do not want to resize and change color whenever they are used.
Any help will be greatly appreciated
Thank you
The color parameter won't do anything because a stamp is an image. You can set the opacity by right-clicking on the stamp, select 'Properties', defining the opacity and check "make properties default '. If want a uniform initial size, you will need to re-create the stamp to the desired size.
-
Dynamically resize images on a webApp list page
Hello world
I used the following code to dynamically resize images for a webApp event list page:
< img src = "{tag_image list_value}? Action = thumbnail & width = 384 & height = 253 & algorithm proportional ="/ >
It works perfectly but when I click on the image, it is not a link to the event details page.
Adding dynamic code I got the following only:
list {tag_image}
This made the image and when you click on it it went to the detail page, then is it possible to revise the dynamic code so that it renders an image which, when clicked, navigates to the page of detail?
Would be very grateful for any advice.
Thanks in advance.
You encapsulate your image in an html anchor where the attribute href has the tag url for this layout in it.
-
How to make a symbol that is resizable by the user?
Is it possible that I can do any symbol resizable by the user so that the handles will appear on an object and allow the user to resize an object dynamically? Curiously, calling the function. draggable() jQuery allows you to perform any movable object, but the function caller. resizable() seems to have no effect at all. Anyone else tried this?
Hello
So, I just try [function. resizable()]. And it works very well to create a rectangle on the stage.
Did you forget to style sheet?
- 2 files are needed: ui.min.js - jquery and jquery - ui.css
- I select my rectangle, then I add class: ui.resizable
Well, I don't know how you load jquery - ui.min.js: $. getScript() or yepnope?
With the help of. getScript() $, you can load jquery stylesheet using this line of code:
$(" ", {"rel":"stylesheet","type":"text/css","href":"css/jquery-ui.css"}).appendTo("#Stage");
I summarize:
- Two files are necessary (js and css).
- Addition of class 'ui.resizable' is required.
-
dynamic resizing of columns too wide (javascript, CS5)
Hey. I'm just starting to writing scripts for InDesign (and realize how I've been losing in recent years too much time). So far I managed to solve the minor issues myself, but this one I don't know enough to make round. I appreciate that what is needed for the solution is probably a pretty great piece of code, so I'm grateful for any advice you can give, just did he hint or nudge in the right direction.
What I have is this little piece of code that comes if applies a style of cell for all tables in the selected block of text:
var myTextFrame = app.selection [0];
var myTables = myTextFrame.parentStory.tables.everyItem ();
var myTableCells = myTextFrame.parentStory.tables.everyItem ().cells.everyItem ();myTableCells.appliedCellStyle = "NameOfCellStyle";
What I have to do here is looking for one of the tables of myTables which:
(1) are wider than myTextFrame (i.e., wider than the text block, they are in)
(2) have exactly two columns
(3) have a first column wider than the second column
In these tables, the first column should be resized so that the table fits exactly inside myTextFrame.
The best solution would be a dynamic resizing is not dependent on the specific numbers, because the size of myTextFrame may vary, but right now I'll settle for what it is, even if it means the creation of several scripts for text different widths of chassis.
So there. After too many attempts failed, resulting in large part of me having very little evidence of what I'm doing, I'm about to give up. Any help or advice is greatly appreciated.
Thank you
Let's go top a step at a time.
for (s=0; s
If your tables have lines on the outer edge, zoom in! The right side of the resized table is inside the text frame, but his race is on the outside. If this is a problem, you probably have to subtract the thickness of the line of the available width as well. (I don't usually have this problem, because most of the time, my paintings is outline.)
-
Dynamic resize TextArea without scrollbars
There is an example of a text box dynamic resizing without scrollbars on the link below, but it does not work with htmlText, only normal text.
Any suggestions on what are the changes to the code to make it work with htmlText?
It's link with the example:
Thank you.
Maybe this:package components {}
import flash.events.Event;
Import mx.controls.TextArea;
SerializableAttribute public class DynamicTextArea extends TextArea {}
public void DynamicTextArea() {}
Super();
super.horizontalScrollPolicy = 'off ';
super.verticalScrollPolicy = 'off ';
this.addEventListener (Event.CHANGE, adjustHeightHandler);
}private void adjustHeightHandler(event:Event):void {}
trace ("textField.getLineMetrics (0) .height:" + textField.getLineMetrics (0) .height);
If (height<= textfield.textheight="" +="">=>
height = textField.textHeight;
validateNow();
}
}override public function set htmlText(val:String):void {}
textField.text = val;
validateNow();
height = textField.textHeight;
validateNow();
}override public function set height(value:Number):void {}
if(TextField == null) {}
If (height<=>=>
Super.Height = value;
}
} else {}
var currentHeight:uint = textField.textHeight + textField.getLineMetrics (0) .height;
If (currentHeight<=>=>
If (textField.textHeight! = textField.getLineMetrics (0) .height) {}
Super.Height = currentHeight;
}
} else {}
Super.Height = super.maxHeight;
}
}
}override public function get htmlText (): String {}
return textField.text;
}override public function set maxHeight(value:Number):void {}
super.maxHeight = value;
}
}
} -
Hi all
Oracle 10g. Linux.
I am facing the error while trying to import a dumpfile below
IMP-00003: ORACLE error 604
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-01655: impossible to extend the cluster SYS. C_FILE #_BLOCK # 128 in the SYSTEM tablespace
IMP-00017: statement failed with error ORACLE 604:
' CREATE TABLE 'EBFA25_RGS_MM0001' ('RECID' VARCHAR2 (255) BLOB 'XMLRECORD') ".
"PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255" STORAGE "(FREELI 65536 INITIAL."
"(M 1 FREELIST GROUPES 1 BUFFER_POOL PAR DÉFAUT) LOGGIN TABLESPACE"T24DATAXML"" "
'G NOCOMPRESS LOB ('XMLRECORD') AS 'LOB_EBFA25_RGS_MM0001' (TABLESPAC STORE '.
"E" T24DATAXML"ACTIVATE ONLINE CHUNK STORAGE RETENTION STORAGE CACHE 8192 (EN'
"(ITIAL 65536 FREELISTS 1 FREELIST GROUPES 1 BUFFER_POOL PAR DÉFAUT))" "
Thank you
KSGIt seems that the value for minextents for your tablespace is located at 56 and tablespace doesnot have enough space to allocate as much quantity of memory regarding the contiguoes extensions. Then, either you need to add a data file tablespace or resize the existing table. You can also try the decrease of the Minextents value for the tablespace if you think this tablespace has enough space to accommodate segments. Better would be to add a file or resize a file.
-
How to prevent resizing of the pop-ups, disabling the menus of sites?
Since upgrading to Firefox 13, I have problems with sites opening new window resized with the menu drop-down menus (file, editing, etc.) and other toolbars turned off or removed. I uncheck all the advanced options in the section activate Java Script of the Firefox Options menus, but appears not to have done the trick.
Bottom line: I want these pages to open, but I don't want the resized window or my menus and toolbars disabled. I thought that I had that problem licked, but it seems to have resurfaced with Firefox 13.
You can change some hidden preferences using the topic: config functions of control in these pop-up windows:
- See-> http://kb.mozillazine.org/About:config
- Preferences to change-> http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
History of clear ranking with only refers to the cluster
I have a group of UI elements that I save them as a strict type def be reused between various programs. I can send data in each of these elements. However, I use graphic waveform instead of waveform graphs so that I can stack data. In my application, the user can select data at different points in time so I need clear history graphic waveform and then update the graph with the necessary values. It works fine if I make a direct reference from the graph but I can't operate using just the reference to the cluster. I get either a mismatch of type if I use a strict reference, or I don't see the historic property at all if an appending reference is used. I've seen people putting this problem before but had not seen the right solutions that work with just the reference of the cluster. Any thoughts?
In the comic book, do a right-click on the reference to the "table of waveform" and select Create-> constant. Strictly typed constant wire at the entrance of "class of target" of "more class specific.
-
How to set the cluster error in postexpression?
Hello
I created a c language #-driver that returns a 0 for the pass or - 1 for failure in the functions 'int MyFunction().
Now I use this function for teststeps.
Question is: How can I use this returnvalue to set the cluster error?
So that one - 1 causes an error.
I think it can be done somehow in the post expression.
How can I put a
If (returnvalue == - 1).
{
Result.Error.Code = 10100
Result.Error.Msg = "an error has occurred."
Result.Error.Occured = True
}
Thanks for help
Hi OnlyOne,
Check out this example (stored in TS4.0)
The tower is done using a breakets conditional and literal.
Locals.nReturnValue is-1? {Step.Result.Error.Code = 10100, Step.Result.Error.Msg = "Error occurred", Step.Result.Error.Occurred = True}: {}
Concerning
Jürgen
-
Is it possible to recover the cluster labels in the data of the class?
Is it possible to recover the cluster labels in the data of the class?
I'm looking to use the labels of the cluster in the class data to build an insert sql on a mysql database. I am currently doing this way by using a cluster control, but it becomes big enough and I want to reorganize.
Thank you
Zac
-
Access and manipulate elements of the cluster
I have a group of 4 elements. One of the elements is a ring with 4 data entry. Is it possible to manipulate these entires 4 data based on a condition?
For example, when a condition = 1; then 3 ring entries will be disabled and grayed out. When not, all 4 entries must be enabled.Is it possible to get the local variable for those inputs of the ring in a cluster. or ideas?
Hello
When you right-click the control of the ring, you will have a Create-> property Node-> disabled]
AS LONG AS you call the command is not strictly Type Def or the cluster that contains the control of the ring is not strictly of Type defined, you can use property "Disabled items []" to get the behavior programmatically.
When a condition is true, the index numbers of items that need to be disabled for this hardware node of wire.
Edit: I see that dan_u already answered, but I couldn't open the dan_u vi, I LV 2010.
then attached the vi according to my explanation.
-
Remove the cluster 2 to another cluster
I am trying to inspect a thread and if it contains a cluster, then pull the cluster and treat it separately from the original cluster. Help on this would be greatly appreciated.
_Vince wrote:
After taking a step back and looking at the bigger picture,... First of all, I want to make a data table in a cluster, send the cluster added to a vi that takes the names and values to, and then treat the data table differently. It is the basic action that I want to do, and then if there is another cluster in the first group that I wanted to extract and deal with it, as I first asked.
Attached, is an example of what I'm trying to do.
Fine thanks
Vince
You were so close.
Ben
-
Hello
I want to spend a cluster that can change its content to one under VI. The cluster does not change by program, but during programming, that is, I could add or remove items in the / cluster. Using direct wire or local variables I would have to change each sub VI that uses the cluster updated the. I also tried the typedefs, but I met the same problem.
At the same time the Subvi should be able to update the cluster I spent.
In C++, I use classes like struct (equivalent to the cluster of LV) and pass a pointer to a class object to a function. Within the function, I choose the members of the class I want to use inside this function. If I change the class structure, the functions of the Word are not affected (of couse only as long that I remove irrelevant of class members of the called function).
Example (from C++):
settings * param; 'settings' is a class that I use to group variables
doSomethingUseful (param);
/ * the doSomethingUseful function uses the pointer to parameter and accesses the members of
Param-> variable1
Param-> variable2
...
Hereby, I can change the values of variables stored in the param object
*/
Best,
Max
Maybe you are looking for
-
Why would it be good for Firefox to remember the story?
Try select options: I can't find any information of when and when not to remember the history would be a good thing.
-
Hi all in order to accept a shared calendar, I have 'connect' to my apple ID (even if I am connected to icloud on my mac) It makes me update my password, I won't update my password I have a very old password of 6 letter with no ceiling or numbers and
-
For TouchSmart 610 FireWire card
I am considering buying a TouchSmart 610. I have little material that uses firewire. Are there PCIe firewire cards can be installed in the TouchSmart provide a firewire port?
-
I don't know what to do to fix my anti virus says I have a threat: Rootkit: boot sector hidden in DRIVE0 MBR PHYSICAL and it cannot be fixed or removed or quarintined can someone tell me how I can fix this I know not long since having my windows xp c
-
OfficeJet 6835 e-all-in-one: by default copies the value 2?
Printer has been recently to make a donation to a non-profit organization for use with point of sale software. With our previous printer, a Canon, we could go in Control Panel Windows and under printers, printing preferences, set the printer to autom