dynamically selecting active at TS2012

TS2012

I have several configured reports (all different displayable reports), and they all generate very well (they are all on the disc where I think they should be)

At the end of the run, I get the default visible displayed report showing, and top right on cone winder, I have control of the "active State".

I'm looking to find a way to dyanamically together (at the end of execution - decision was based on the final results of USE) the order of this list and possibly delete some reports in the list.

Says otherwise-

At the beginning, I want to start with default values that generate 6 different reports, and they will be generated in order 1-2-3-4-5-6, and end up on top of the disc.

After testing the UUT (but before the reports are available to the user) I need to delete some and reorganize the rest, such as 4-2-6-3 is allowed to select in the drop down "Active State" (with 1.5 removed).  (and #4 is indicated to the user by default).  Who is deleted and what the command is based on the test results of the UUT.

Could I get some advice in this sense?

I think you can change the collection of Execution.Reports to get what you want.

I configured both reports and then put the following statement in a PostUUTLoop reminder to swap the order that they appear in the list and it seems to work fine.

RunState.Execution.Reports.InsertExisting (RunState.Execution.Reports.Remove (0), - 1).

Tags: NI Software

Similar Questions

  • How can I dynamically select the shared Variable API programming data type?

    I am trying to create a configuration of open connections of variable shared using the programming API. It seems to me that the cleanest way to do would be to put one "open and check" routine in a loop, then call it for each variable in the library.

    The question that I am running is that I have different types of data in my library (to help a server Modbus i/o and data types 'boolean' and 'single' in my library.) How can I dynamically select the data type of the shared variable API?

    See the attached snipit.

    Thank you

    What I ended up doing was doing a Subvi to open, read, write, and close each data type, I use the packaged in 4 polymorphic SubVIs (polymorphic Open, read, etc...)

    Now all I have to do I drop in the polymorphic Subvi and it switches automatically to the appropriate data type

  • Dynamic selection tabular list

    Hello, I am new to the PL/SQL and APEX.

    I want to create the dynamic selection list in a table based on another column in the same tabular form. But lack me of expression stop.

    Can someone tell me whats wrong with my code?

    Behold, my code

    SELECT ID, NILAI,

    APEX_ITEM. SELECT_LIST_FROM_QUERY (7, NILAI,'SELECT V.MEANING AS DISPLAY,)

    LOOKUP_CODE AS RETURN_V FROM apps.fnd_lookup_types_vl@SUCODEV T,

    Apps.fnd_lookup_values_vl@SUCODEV V where T.lookup_type = V.lookup_type and v.attribute_category =' |' SCI_TYPE_SELEKSI' | "and V.ATTRIBUTE1 =' |" BADAN |) SELECT_LIST_NILAI

    OF SCI_TABLE

    v.attribute_category is the search category in the database

    I want to make this dynamic selection list as V.ATTRIBUTE1 value is generated by another column named BADAN

    I'm sorry for the bad explanation

    I just edited my nickname of Lexover XD

    Thank you

    Post edited by: Lexover

    Post edited by: Lexover

    Hi guys, I found the error. Here's the correct code:

    SELECT ID, NILAI,

    APEX_ITEM. SELECT_LIST_FROM_QUERY (7, NILAI,'SELECT V.MEANING AS DISPLAY,)

    LOOKUP_CODE AS RETURN_V FROM apps.fnd_lookup_types_vl@SUCODEV T,

    Apps.fnd_lookup_values_vl@SUCODEV V where T.lookup_type = V.lookup_type and v.attribute_category = "SCI_TYPE_SELEKSI" and V.ATTRIBUTE1 =' | NILAI) SELECT_LIST_NILAI

    OF SCI_TABLE

    I put the apostrophe before | and the column name (parameter) and doble single quote in varchar where clause. Double quotation mark, 2 times the apostrophe. Easy to understand hope.

    Thanks guys for the feedback.

    Lexover

  • Dynamic selection of images for OBIEE 11 g report

    Hello dear colleagues,

    need help to solve a problem with the dynamic selection of images for reports OBIEE 11 g.
    For OBIEE 10 g, it works perfectly - put images in

    *'\ < HOME_ORACLE_BI > \web\app\res\s_oracle10\images'*

    Directory and enter edit the column formula (in the answers) of the expression:

    * ' < table_name > '. "" < table_column > | ". jpg'*.

    and selecting

    URL of the image (in the properties of column-> Data Format)

    retrieve the images appropriate for the corresponding model (the project is for fashion retail customer) regarding the description of the specified column (for example * "DM_ITEM".) «MODEL_CODE ' ('09361' = *) put correspondence the name of the image file (* '09361.jpg' *).»

    For the OBIEE 11g (installed on W7, DWH on MSSQL 2008R2, VM in the field), I followed the link * "http://vikramwalia.wordpress.com/category/obiee-11g/" * and stuck at the step where the browser should recover image (s) based on the following address:

    *' http://localhost:9704/analyticsRes/product / *.

    Dive into the issue, I checked the staticports.ini and in the * [WEBLOGIC] * section find the following message is displayed:

    *#The port of 'content' for the most part POET. This is the Weblogic managed server port on which BIEE applications are deploie.*
    Oracle WLS BIEE managed Server Port No. = 9704

    that seems to be OK...

    The netstat command response confuses me much since I found (and also of external) record for TCP Local address (should be < IP localhost >: 9704), which lead me to the point that, probably one of the OBIEE 11 g services not started OR I made a mistake during installation of OBIEE 11 g, although the system did not send a message about this possibility. BTW, the BI Publisher on this machine works correctly.

    So, kindly ask support or advice on this subject. Thank you
    AL

    Published by: user7374943 on 29.04.2013 01:01

    Published by: user7374943 on 29.04.2013 02:15

    Published by: user7374943 on 29.04.2013 02:19

    Not able to open the IAM blog you referred to above.

    Make sure that you have deployed the analyticsRes component as shown in http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi1113/customizing_obiee11g/customizing_obiee11g.htm. Create a folder called produced under analyticsres and start accessing images.

    Good luck...
    Isabelle Renon

  • Dynamic selection list: link to another page

    Hello

    Following the list of dynamic selection at the bottom of page "product.php" (www.dolls.com.sg)

    < div id = "selectcat" >

    < select name = "Catégories" >

    <? PHP

    {}

    ? >

    < option value = "<?" PHP echo $row_rsCategories ["categoryName"]? > "<?" PHP if (!) () strcmp ($row_rsCategories ["categoryName"], $row_rsCategories ["categoryName"]))) {echo "selected = \"selected\"" ;}? "} > > <? PHP echo $row_rsCategories ["categoryName"]? > < / option >

    <? PHP

    } While ($row_rsCategories = mysql_fetch_assoc ($rsCategories));

    $rows = mysql_num_rows ($rsCategories);

    If ($rows > 0) {}

    mysql_data_seek ($rsCategories, 0);

    $row_rsCategories = mysql_fetch_assoc ($rsCategories);

    }

    ? >

    < / select >

    My goal is, whenever a visitor clicks on a category in the drop down menu, it is transmitted to the respective page "categories.php".

    How can I do?

    Thank you

    Helmut

    Change your code to this:

    In categories.php, use $_GET ['categories'] to filter the Recordset.

  • Problems with dynamic selection lists in IE7

    I have another problem related to the last one I posted here: http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=217 & threadid = 1385428

    I have a list of dynamic selection populated by a SQL Server database.

    I want to select all the items in the list if you have selected a particular item. The code I wrote works fine in Firefox, and I'm assuming that other browsers as well. It does everything not in IE and the specific test does not not in IE7.

    I can't use the fix suggested for my last question, because this time I want all of the selected options and selectedIndex applies only to a single option.

    Any ideas on what I can do to make it work in IE7?

    Here is the code I use:

    I have provided a solution to this question in another forum:

    http://www.Tek-Tips.com/viewthread.cfm?QID=1495671&page=1

    Thank you
    Jesse

  • dynamic selection list hangs with php

    Hi all

    I can't get a list of dynamic selection of work in dreamweaver. It completely crashes whenever I try to add to my page. I found someone else in the forum who had the same problem, but no one ever answered. I've tried several things, including putting just the dynamic record and select on its own page with no other code in this regard. He always breaks DW. I also tried this coding myself by making a listmenu and change it so that the value of the option equals a value PHP echo. It crashed too much here. Does anyone have a piece of code with a selection list dynamic work that uses a recordset that I could look at? This way I can see where I am going wrong. All I'm trying to do is to get a simple drop-down menu select list of employee names, so anyone can choose their name for advice. This is a table, a set of records 2 fields (first and last name).

    Using DW CS3, php & MySQL, windows XP Pro

    Any help would be really appreciated!

    That's all! Thanks a lot for your help!

  • dynamic selection of playlist

    I have manually video playlist create a selection button. but it's not migrate average.

    Problem is if I added 20 + videos, after moving from ScrollBar, selection button screwed up.

    Please tell me how I can dynamically create selection?

    select_mc.visible = false;
    var listbutton:Button;
    
    var scrollPane:ScrollPane = new ScrollPane();
    scrollPane.horizontalScrollPolicy = ScrollPolicy.OFF;
    scrollPane.setSize(200,330);
    
    var buttons_container:Sprite = new Sprite();
    
    var newSkinClip:MovieClip = new MovieClip();
    newSkinClip.graphics.clear();
    newSkinClip.graphics.beginFill(uint(0x000000), 0.8);
    newSkinClip.graphics.drawRect(482,0,200,360);
    newSkinClip.graphics.endFill();
    
    function playlistLoaded(e:Event):void
    {
              xmlPlaylist = new XML(urlLoader.data);
    
              for (var i:int=0; i<xmlPlaylist.RTMPFileList.length(); i++)
              {
                                  //trace(i);
                                  listbutton = new Button();
                                  listbutton.y = i * 19 + 1;
                                  listbutton.width = 197;
                                  listbutton.height = 20;
                                  listbutton.label = xmlPlaylist.RTMPFileList[i].split('/').splice(6);
                                  listbutton.name = xmlPlaylist.RTMPFileList[i] + "__" + i;
                                  listbutton.addEventListener(MouseEvent.CLICK, playVidlist);
                                  addChild(buttons_container);
                                  scrollPane.x = 482;
                                  scrollPane.source = buttons_container;
                                  scrollPane.setStyle("upSkin", newSkinClip);
                                  addChild(scrollPane);
                                  buttons_container.addChild(listbutton);
                                  listbutton.buttonMode = true;
                                  listbutton.useHandCursor = true;
                                  select_mc.visible = true;
                                  listbutton.selected =true;
                        }
                        // set source of the first video but don't play it
                        playVid(0, false);
    
                        if (! bolLoaded)
                        {
                                  ns.play(strSource);
                                  bolLoaded = true;
                        }
                        else
                        {
                                  ns.resume();
                        }
                        controlBar.pause_btn.visible = true;
                        controlBar.play_btn.visible= false;
                        }
    }
    
    function playVidlist(e:MouseEvent = null):void
    {
              intActiveVid = int(e.currentTarget.name.split("__")[1]);
              ns.play(e.currentTarget.name.split("__")[0]);
    
              controlBar.pause_btn.visible = true;
              controlBar.play_btn.visible = false;
              lblDescription.text = e.currentTarget.label.split("__")[0];
    
              highlightBtns();
    
              if (! bolLoaded)
              {
                        ns.play(strSource);
                        bolLoaded = true;
              }
              else
              {
                        ns.resume();
              }
    }
    
    function highlightBtns():void
    {
              if (intActiveVid == 0)
              {
                        select_mc.y = 0;
              }
              else if (intActiveVid == 1)
              {
                        select_mc.y = 19;
              }
              else if (intActiveVid == 2)
              {
                        select_mc.y = 38;
              }
              else if (intActiveVid == 3)
              {
                        select_mc.y = 57;
              }
              else if (intActiveVid == 4)
              {
                        select_mc.y = 76;
              }
              else if (intActiveVid == 5)
              {
                        select_mc.y = 95;
              }
    }
    
    function playVid(intVid:int = 0, bolPlay = true):void
    {
              if (bolPlay)
              {
                        // stop timer
                        tmrDisplay.stop();
                        // play requested video;
                        ns.play(String(xmlPlaylist.RTMPFileList[intVid]));
    
                         controlBar.pause_btn.visible = true;
                        controlBar.play_btn.visible= false;
              }
              else
              {
                        strSource = xmlPlaylist.RTMPFileList[intVid];
              }
    
              lblDescription.text = String(xmlPlaylist.RTMPFileList[intVid]).split('/').splice(6);
    
              // update active video number
              intActiveVid = intVid;
    }
    
    function playNext(e:MouseEvent = null):void
    {
              if (intActiveVid + 1 < xmlPlaylist.RTMPFileList.length())
              {
                        playVid(intActiveVid + 1);
              }
              highlightBtns();
    }
    
    function playPrevious(e:MouseEvent = null):void
    {
              // check if we're not and the beginning of the playlist and go back
              if (intActiveVid - 1 >= 0)
              {
                        playVid(intActiveVid - 1);
              }
    
              highlightBtns();
    }
    

    Thanks for the quick replay.

    I mean the wrong position.

    Finally, I moved to the list component. Who works.

  • I would like to be able to choose the colors, as for windows "point selected", active and inactive.

    Original title: Customize Menu

    I would like to be able to choose the colors, as for the "selected" item, the active windows and inactive, the type and size fonts in menus and dialog boxes and the size of the icons and tabs, as was possible in Windows XP.  Is it possible to do this in Windows 7?

    Hi Ciriaco!

    Please, do a right-click on any empty space on your desktop and choose personalize. In the new window in the background, click the blue window, click the blue advanced appearance settings.

    I hope this helps!

    See you soon
    Julia

  • Dynamically select a complete set of results in a CLOB

    Hello

    Oracle 11g R2 11.2.0.3

    IBM AIX

    A developer came to me with a requirement to query a table based on an ID and have the whole read a clob.

    It needs to be dynamic, since this code is a FK and may appear in several child tables. I've seen similar questions in the forum but none quite addressed my scenario.

    A simple example is:

    create table t1 (col1 number, col2 varchar2(50));
    
    insert into t1 values (1,'Test record');
    commit;
    

    Here's where I need help.

    (i) I select user_tab_columns where table_name = T1.

    .. .but in reality I'll pass the name of the table as a parameter.

    select column_name 
    from user_tab_columns
    where table_name = 'T1';
    
    select *
    from t1 where id=1;
    

    (II) I need the output to be:

    < col_name1 > = < col1_value >; < col_name2 > = < col2_value > etc...

    for example

    COL1 = 1; Col2 = 'Test in the folder '.

    And I need that stored in the content of a CLOB for insertion in a CLOB field in an audit table.

    Any help or pointers greatly appreciated. The key is that it should be dynamic that I do not know the composition of the table where the ID, so I must consult the DD.

    Phil

    You can do this with a query that uses DBMS_XMLGEN.getXML to generate all the data of a query filtered as XML, string flatten the XML into key / value pairs using some XQuery and XMLTable and then use listagg data flattened, to create the concatenated output like you need.  You could do the concatenation with XQuery, but I suspect that listagg is much more effective.

    Be warned, Listagg has a length of 4000 characters limitation, so if your concatenation for a single line is beyond that, you can have problems.

    Everything you do is change the query string in the call to DBMS_XMLGEN. GetXML. This request can then be used to just pump lines in a CLOB in the comic book.

    with xml_test (object_value) as)

    Select xmltype (DBMS_XMLGEN. GetXML ('select * from object where rownum)< 3'))="" from="">

    ),

    xmlflatten like)

    Select x.*

    of xml_test t

    XMLTable)

    ' for $i in $d/ROWSET / / ROW /(child::*)

    Returns the element r

    {

    element node_group_id {fn:count($i/.._/_qui_precede-sibling_::_ligne)}

    element node_name {name ($i)}

    , element node_value {$i / text ()}

    }'

    from t.object_value as "d".

    whole path in the form of node_group_id columns 'node_group_id '.

    node_id for ordinalite

    , node_name varchar2 (30) path 'nodeName.

    , path of varchar2 (2000) node_value "node_value.

    ) x

    )

    Select node_group_id as rec_id, listagg(node_name||) e ='|| node_value, ';') in group data (order by node_id)

    of xmlflatten

    Node_group_id group

    REC_ID DATA
    0 OWNER = SYS; OBJECT_NAME = ORA$ BASE; OBJECT_ID = 133; OBJECT_TYPE EDITION; CREATED = 25 AUGUST 15; LAST_DDL_TIME = 25 AUGUST 15; TIMESTAMP = 2015-08 - 25:17:36:52; STATUS = VALID; TEMPORARY = N; GENERATED = N; SECONDARY = N; NAMESPACE = 64; SHARING = NONE; ORACLE_MAINTAINED = Y
    1 OWNER = SYS; OBJECT_NAME = DOUBLE; OBJECT_ID = 142; DATA_OBJECT_ID = 142; OBJECT_TYPE = TABLE; CREATED = 25 AUGUST 15; LAST_DDL_TIME = 26 AUGUST 15; TIMESTAMP = 2015-08 - 25:17:36:52; STATUS = VALID; TEMPORARY = N; GENERATED = N; SECONDARY = N; NAMESPACE = 1; SHARING = METADATA LINK. ORACLE_MAINTAINED = Y

    2 selected lines.

  • Dynamic selection of actions LOV

    I have a form with 12 fields and a pop up Lov. This LOV is called model.  When I select a value LOV (Template), all 12 fields must be defined with a default value based on the model.

    The model is nothing more than a row of a table. Can be done by using the dynamic action?  Help, please

    George

    Yes, you can create a dynamic Action as follows:

    Event: change

    Selection type: product (s)

    Article (s): PXX_TEMPLATE

    Real Action

    Action: execute the PL/SQL Code

    BEGIN
      SELECT COLUMN1, COLUMN2
      INTO PXX_COLUMN1, PXX_COLUMN2
      FROM TABLE
      WHERE ID = PXX_TEMPLATE;
    EXCEPTION
      WHEN NO_DATA_FOUND THEN
        PXX_COLUMN1 := NULL;
        PXX_COLUMN2 := NULL;
    END;
    

    Page to submit items: PXX_TEMPLATE

    Page to return items: PXX_COLUMN1, PXX_COLUMN2

    Thank you

    Erick

  • Dynamic selection of dynamic list

    Hello

    Please, help me to below scenario.

    I created the drop-down list called 'Country' and created a drop down for State. How to create the dynamic filter based on selection of the country. Need to filter according to the selected country.

    Thank you

    Vivek


    Take a look at this thread: https://community.oracle.com/thread/3779373

    Note that the drop-down list must be a list of values. See slide 27 of the bridge for an example of what it looks like at design time and the duration-features and benefits: http://www.oracle.com/technetwork/apps-tech/policy-automation/overview/opafeb2015featuresbenefits-2431219.pdf (example is very similar to yours - pick a State, then on that basis choose a particular city state)

    More details in the thread mentioned above.

    See you soon,.

    Jasmine

  • How to make a list of dynamic selection with time interval of 15 minutes

    Hi all

    I have a question. I need a selection list containing the time with 15 minute intervals from 08:00 until 16:00.
    example 08:00
    08:15
    08:30
    08:45
    09:00
    09:15
    and so on until 16:00
    Or values stored in a column of varchar type.
    Can someone help me with this one please?

    Best regards
    Caroline

    You can generate the entries in a dynamic way, as:

    select  to_char(trunc(sysdate)+8/24+(level-1)*1/96,'HH24:MI') period
    from    dual
    connect by level <= 33 
    

    or if you want/need to use your stored values:

    select display_column, return_value from table where
     display_column in (
                   select  to_char(trunc(sysdate)+8/24+(level-1)*1/96,'HH24:MI') period
                   from    dual
                   connect by level <= 33 )
    
  • Dynamic selection list

    Hi all

    I want to collect information about a feature, but according to the value of an attribute from entity level - I want to make the selection of the value of the attr - dynamic level entity.


    i.e.

    Study the following
    Entity: the children
    Relationship: the child
    Entity-Attr: the child's name
    Entity-Attr: the child's gender
    Entity-Attr: the child's toy
    -So if I add x 2 instance child
    Child Instance #1: "Tom", "Male", I would require his drop down list for a toy to be like "Action Man", "Spider Man" on the screen for the user to select
    While:
    Child Instance #2: "Jenny", "Female", her drop down list for the child's toy would consist of: "Barbie", "Justin Bieber CD's"
    Hope that makes sense

    See you soon

    Published by: user9015745 on August 23, 2011 03:00

    You would not be able to ask sex and toy preferred on the same screen without a 'submit', unless you use javascript. Assuming that it is acceptable to ask the names of all the children and women on a screen (i.e. in collecting entities) and continue to ask questions about the favorite toy of each child on a separate screen, you can take advantage of the screen definitions and screen flow to achieve this without any programming.

    Basically, you need to set the following:
    -an entity collect the screen for children that you collect the name and gender of each child
    -a 'male_toys' screen requesting favorite toy to the child and who uses a choice list that contains only the 'male' toys
    -a 'female_toys' screen that asks favorite childhood toy and that specifies the list "female toys."
    -define a global screen flow that has first collects 'children' is evolving into the "flow of child", then ends.
    -define the workflow of the child to begin with a decision point based on the sex of the child which is progressing towards the male sex toys to screen if = 'male' or the female toys screen if = "female".
    -Add the overall flow to the summary screen of the evaluation so that an interview is initiated by starting the overall throughput (you want to force a stream of screen to use to undertake the interview to make you progress in automatic screen based on the pursuit of a goal)
    -Also to note: you probably want to shoot left alternative in the child_toy_male and child_toy_female so that it is clear what child screen wonders about the screens.

  • Display dynamic selection criteria

    Hi all

    I've looked everywhere and I was not able to find a solution to this particular problem I have.

    I have a search entry page which will collect the search criteria selected by the user for a specific set of joined tables. I have a search results page that displays the run view object, I have a view object query that needs to have a dynamic where clause. The where clause for the query associated with the view needs to change based on user input in the search criteria page.

    I've experimented with patterns named view associated views. I see that it offers you the possibility, I need. However, I am not at all sure how to specify what criteria view named serves in my opinion in my search results page. I found in another post, EL does not work in the definitions of the page, and it is in the attribute of 'Criteria' of the 'searchRegion' defined in the definition of the page where you can set a view criteria associated with the iterator.

    I accept the possibility that I go about it completely wrong. Can someone tell me please in the right direction?

    See you soon

    haven't check this section yet ;)

    http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/bcadvvo.htm#BCGFHAGA

Maybe you are looking for