dynamically start VI selected on the target of the PSC

Similar Questions

• When I right click Start button select Explorer, I can decide what folder is open other than the start menu?

  When I right click Start button select Explorer, I can decide what folder is open other than the start menu and dozens of file extensions?

  Can we just my computer with the list of drives?

  thanx

  Hello

  I suggest you to follow these steps and check if that helps:

  a. right click on the Windows Explorer icon

  b. in the menu that appears, click Properties.

  c. in the target box, add the command line switch ' / root ' to the "% SystemRoot%\Explorer.exe" command, using the startup location that you want.

  d. for example, if you want Explorer of Windows to start at the root of drive C, edit the command as follows:
  % SystemRoot%\explorer.exe/root, C:\

  It will be useful.

• Safari does not start, or crashes on the selection

  My Safari now plays too much upward. It does not start at all. Hangs on the selection, with the message that "Safari quit unexpectedly. " Click open to open the application again. This report will be sent to Apple. "I'm using now Firefox - I studied several sites and other problems of sounding similar, deleted the files they suggest, allowed, caches, cookies, removed 3rd party software, (I think it's where my problem started this afternoon, my mobile phone operator, Vodacom detailed billing report requires the software titled 'ecrypt' for open invoices, and started crashing when I tried to open a.) I eventually trashed the software, but to no avail...) and did what you suggested to the person above. I got the following results:

  Step 1.     I signed out and signed him as a guest - user will understand - works Safari very well! Then I logged as Clive Lake, and it crashed immediately, would not start or start and with the same message...

  Step 2.     I rebooted in safe mode after unplugging all devices: No go I'm afraid... I tried several times and I'm actually still in safe mode.

  It would seem that something I did in my profile caused the problem.

  Any advice about where to go from here would be appreciated.

  Concerning

  Clive L.

  iMac (21.5 inch, at the end of 2013)

  OS X v10.11.1

  3.1 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 750M 1024Mo

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• Results of the selection of the files or programs of the office or start menu in view this file does not have a program associated with it for performing this action.

  I am running Windows XP.  My deleted security a software threatens malware a few days before and since any file or program I select in the desktop, start menu or results of the status bar in a notice that "this file doesn't have a program associated with it for performing this action.  Create an association in the folder options panel.  Nothing I've tried has worked!  Help!

  Run the EXE File Association Fix http://www.dougknox.com/xp/file_assoc.htm
  You probably also need to run the LNK (shortcut) file Association problem from the same site.

  Be sure to read the instructions at the top of the page.

• Dynamically select all the rows in a DataGrid

  Is there a simple way to select all the rows in a DataGrid dynamically?  I want to select all the lines as soon as the DataGrid control is created.

  Thank you!

  Lee

  This code should answer your question.

  If this post has answered your question or helped, please mark it as such.

• dynamically display title based on the value selected in the column picker

  Hi all
  Would it be possible to display the title of the dynamic report based on the value selected in the column picker. Suppose I have two State of the column and region. When I choose the status in the column picker the title of the report will show 'Summary of the situation' when I'll choose the region then the title will change to "summary of the region. Please help me...

  Hello

  Check your mail before I send the entire process with screenshots.

  Concerning

  NGO

• Dynamic action - SQL - not returning the result as expected

  Hello

  I have a dynamic Action that runs some SQL codes and must return a string to a text box...

  the sql code that the action runs when a button is reached is:

  Select REPLACE ("|: P292_QPRODUCTS |) '''', ':', ' ' || : P292_QAOPRODUCTS | ""ProductsID"(="') from DUAL "

  P292_QAOPRODUCTS = DATABASE: JAVA

  P292_QAOPRODUCTS = AND (user can also choose OR)

  In the command SQL is what I see:

  "DATABASE" AND "ProductsID" = "JAVA".

  In the text box apex that action must set the value of the use of SQL I see only:

  ''

  any ideas?

  see you soon

  t

  Hello

  Could you share the 'Settings' and 'Affected Elements' sections of the property page of DA?

  You can also try a PLSQL and Code PL/SQL type as:

  Start

  Select REPLACE ("|: P292_QPRODUCTS |) '''', ':', ' ' || : P292_QAOPRODUCTS | ""ProductsID"(="') "

  in: DOUBLE P292_TEXT_BOX;

  end;

  Don't forget to fill in the field "Page elements to return" with the name of P292_TEXT_BOX.

  Concerning

• Start-up operations of the worksheet in the administration Console

  If a form that includes four or more dimensions that all the parents value dynamic calc, when these parents owned dynamic calc are selected for all dimensions and you press GO, spreadsheet operations are started in the background that could be seen in the administration Console. The problem is that they won't be stopped once started and this thing picks up the whole performance of the server, unless it is killed from the administration Console. This is the case with our Production Server.

  Another issue that could interesting is that our Production Server takes quite considerable time to retrieve the data of the members of dynamic calc compared to its exact clone on the Test Server where it works very well.

  Someone has an idea?

  Thanks for the reply. The cubes were same. I tried the restructuring of the database and this solved my problem. Thanks for your help.

  Kind regards.

• Select only the objects in a rectangle selection

  I am a new user of Illustrator CS5, switching from Freehand. I'm trying to find out if there is a way to select only the objects in a marquee? In AutoCAD, you can make a selection on the left window to the right and only those objects entirely in the window are selected. If you the window right on the left all the objects that are "crossed" or affected by the window are selected. Is there a similar technique in Illustrator?

  Currently, I have to select the objects, and then go back and hold the SHIFT key to deselect the object I don't want, or place objects on different layers and then lock the layers to prevent additional items get selected.

  In AutoCAD, my main program, you simply draw a window selection, left or right, depending on what your next step would be. No special tools or rocking or thinking, that's just the selection primary process and very intuitive.

  I posted a discussion on the Illustrator forum several months ago, which still arouses comments so this seems to be a tool that would be appreciated by many users. Someone posted a script but it has not worked for me yet.

  Thank you for everything that you can do to solve this problem.

  This is a copy of my last post of the original thread. I found some discussions confused because I have no experience in writing or by using scripts. So I copied all the recommendations in a document to read without the comments and digressions. After several hours and a lot of searching on Google I found what solution adapted to my goal, which was a selection process fast and simple with fewer steps to use.

  So, I think I have this job. The following is what I did:

  1 copy the script by Carlos Canto post #11 here:

  http://forums.Adobe.com/thread/856221?start=0&TSTART=0

  2. open the ExtendScript Toolkit Utilities > Adobe utilities - CS5.5 > ExtendScript Toolkit CS5.5 > ExtendScript Toolkit CS5.5.App

  3. when the program opens, paste the script in the large Panel on the left.

  4. then go to file > save as.

  5. that the dialog box click on the arrow next to the save box slot to expand the section options.

  6. next, go to Applications > Adobe Illustrator CS5.1 > Presets > en_US > Scripts.

  7. then, in the Save as box enter a name to identify the script (I named mine Window1).

  8. click on save and close the Toolbox.

  Launch Illustrator and open a drawing.

  1 using the rectangle tool, I drew a rectangle around the objects.

  2. make sure that the new rectangle is selected.

  3. I went to file > Scripts > Window1.

  4A got an error message - error 8705: target layer cannot be changed 25-> iart.selected + true line:

  Oops, you must have ALL unlocked layers.

  5. you click OK.

  6 unlocked all the layers.

  7. my new activated rectangle.

  8. went to file > Scripts > Window1.

  9 here! Items in the rectangle are selected and the rectangle is removed.

  So yes, this script works as requested. Thank you, Carlos.

• Firefox does not account settings to open the home page to start and open rather the previous tabs

  Opening of Firefox, the browser displays my previous session, despite my selection 'display the homepage' or 'show white screen' on the opening.

  You can check if you have a user.js file in the Firefox profile folder (a detailed list of the system shows that you have) which defines the pref browser.sessionstore.resume_session_once to true.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  (I noticed that the mozillaZine knowledge base is down at the time of this posting)

  The user.js file will be present if you or a other software created this file and normally will not present.
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • https://support.Mozilla.org/KB/profiles

  Windows hides certain default file extensions.
  Among them .html and .ini and .js and .txt, and you can see only a file name without file extension.
  You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

• el capitan osx mail does not start. Git just the dial turns how to fix?

  OS x El Capitan Mail will not start. Get the dial of spinning and clicking on the icon says not responding do not. Tried reinstall OSX but has not changed. You will have to use my email. How can I fix it?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• LabVIEW can find location of row/column selected in the open worksheet?

  Instead of asking user to LabVIEW manually to input data (location of the row/column you want for data entry in the spreadsheet open), can read LabVIEW that the location of the row/column selected in a worksheet open, selected by the user?

  If so, LabVIEW now has a starting location for the user to launch inputing data without having to ask the user LabVIEW!

  Any ideas on how to achieve this would be very appreciated!

  Thank you!

  Barry

  For what you want to do here, read and write in the cell current.  This example shows you the basics...

  Example of NOR

• How to select all the contents of the control channel automatically

  Hi all

  We use barcodes to string for control of the input string. How can I replace the old data with the new?

  1.I used keyfocus but new data insert just behind the 'old'.

  2. we do not want to erase the old rope before registration of new data. because it should also check the input string.

  Thank you!

  There is a call from Text.Selection property node where you can choose the starting point of the selection and the endpoint.

  

• marquee selection in the drawing image control

  I would like a vi that draw a marquee selection with the mouse in a control program image.

  This works so far if the user begins to drag inside the image control. The code is actually robust against

  start the image and entering again. Unfortunately this isn't the case if someone starts to slip outside

  peak control. then drags succeeding is arrested after the mouse moving a few pixels (about 1 to 10) and the

  rect selection gets fixed.

  No idea what could be wrong with the vi? Thank you!

  Your problem is with the fact that you have a structure of the event inside the other. This is generally a no-no and should be mentioned in the help (there is a warnings section).

  Specifically, the structure is part to begin to get events when the VI goes into run mode. This means that from then on, the internal structure will start enqueueing mouse all events on the image, so that when you start outside and go inside, structure remembers this event, but won't have to deal with until he actually runs. When she is not running (because there was a supported external mouse event), it will load the mouse previous event immediately.

  The basic solution is to use a unique event structure. You can use a cluster and a registry change to keep state data and don't forget what state you're in, if you need a timeout, etc., so that you know how to respond to each event.