Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

Hello

Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).


I did a few Google and found that we need to add something in the Essbase.cfg file as below.

Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

Possible problems

Analytical services cannot lock enough blocks to perform the calculation.

Possible solutions

Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
    1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
    2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
    3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.

In fact in our queue (essbase.cfg) Config Server we have given below added.

CalcLockBlockHigh 2000

CalcLockBlockDefault 200

CalcLockBlocklow 50


So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.


Kind regards

Naveen

Advertisement

Yes it must *.

Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

Tags: Business Intelligence

Similar Questions

  • Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

    Original title: problem ejecting USB Mass Storage Device

    When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

    Hi a. Cook,

    (1) how long have you been faced with this problem?

    (2) is limited to any specific USB device?

    This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

    Method 1:

    (a) Download Process Explorer from the link below

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

    (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

    (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

    (d) find the process and its PID (process identifier) in the following box.

    (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

    (f) press Ctrl + H to display the handles in the view in the lower pane.

    (g) find the file according to the drive letter and right click, choose Manage close.

    Reference:


    Problem ejecting USB mass storage device
    http://support.Microsoft.com/kb/555665

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2: You can see the steps in the link below by Diana d.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

    Method 3: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

  • Firefox does not open more than one window, only opens new tabs. Firefox does not open in safe mode.

    Firefox does not open more than one window at a time, and then opens only new tabs. When asked to open the link in a new window - nothing happens, no error message or the page appears. Otherwise, it works great, but no new firefox window cannot be opened menu or the mouse. I tried to reinstall firefox several times, which did not help.

    This has happened

    Each time Firefox opened

    Is 3-4 months ago

    There are some extensions that are causing a problem like that. See this:
    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

  • I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

    I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

    original title: why isn't my laptop recognize the eathernet link?

    Go to your computer manufacturer's support web site
    and search for the Windows XP drivers for your specific computer or motherboard model number.

    If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
    Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
    then the SATA, Audio, USB, LAN, etc, drivers.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • HP 3015 printer does not print more than 1 copy both

    Original title: all-in-one Hp 3015

    3015 HP all-in-one does not print more than 1 copy at a time.

    Hi James,

    Looks like a problem of printer settings.

    Here is something you can try.

    1. Select Start, and then devices and printers.

    2. right click on the HP LaserJet 3015 printer icon, then select Properties.

    3. Select the device settings tab.

    4. find Mopier Mode and storage of work settings.

    5. change the settings from active to disabled.

    6. click on apply then OK and then try to print.

    It has worked for many users. It might help you as well. Answer please if you have any questions.

  • When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

    I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

    screen A___
    WMC has discovered the following:
    Analog cable (1 Tuner)

    Other tuners or TV signals were detected but will not be configured.
    (Show details)

    Is this Setup correct and complete?
    o Yes, configure TV with these results
    o no, show more options
    ________________
    When I click on show details, it is said:

    screen B___
    No TV Signal
    If a TV signal should be present, check your signal for following tuners connections and try again:
    Hauppauge WinTV 418 BDA Tuner
    ________________
    There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

    When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

    I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

    I would really appreciate any help and if more details are required, please let me know.  Thank you!

    -Doug

    I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

  • "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

    Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

    I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

    Ron, I have something for you!

    and for all the people who have this problem :)

    Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

    Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

    The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

    Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

    My TV works and looks okay now.

    It actually works!

    the only problem is that it is not in HD

    but there is something


  • Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

    Hello I am trying to download my site www.novopro.co.uk screw "Publish to FTP" I have updated a page and downloaded from the website and now I get this warning on everypage. Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. If I click ok the site will load, but I get this error on everypage. I removed all widgets party 3 E, g, engines search, galleries etc.

    I looked through the forum, but not seen no real solution to the issue, I looked at the 'Muse.assets' in the JSConsole and the only script to update is touchswipe.js I do not understand why its doing so, my host said there is no problems with the servers smd ive only uploaded the site (all files) several times.

    My client is now a little inpatient as im yet to find a solution and I'd like to solve this problem as soon as possible. Please can someone help me shed light on the issue and im using the latest version of adobe Muse. Adobe Muse CC 2015.2.1

    Thanks in advance.

    In addition to what was suggested above, you can see if there are other solutions in this doc "some files on the server may be missing or incorrect" Warning Message that can help you and let us know?

  • "Impossible to reach on the Adobe servers. Check your firewall settings, and then try again a few minutes' work Dosent

    You have a problem with the VAC, it says: "cannot reach the Adobe servers. Check your firewall settings, and then try again in a few minutes". Well I did, but it dosent works, need help, please!

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  • I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

    Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

    You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

    Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

    If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

    There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

  • BlackBerry smartphones "Blackberry App World is had problems to connect to the server Blackberry App World. "Check your network connections, and then try again.

    Whenever I try to access an application, appworld is a site of the company that send me to appworld I get this error.
    "Blackberry App World is had problems connecting to the server Blackberry App World. "Check your network connections, and then try again.

    I have loaded the bb appworld re have the latest version for my new bb bold 9900, but still the error and then lock up. Power off, and get a message that I had an unknown error.

    People have had this problem since 2010. I never had this problem with my flashlight or my 9000 "BOLD".
    Anyone know what is happening? I also have the latest OS on my 9900.

    Found a solution! Laughing out loud! How delayed. I changed my email in bb code. For example, after changing from one gmail to another account, I changed it back and baaammmm! Problem solved, but do not know why it should be a problem in the first place right?

    Good luck to you guys who do not have the possibility of returning to another email.

  • Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again

    Hi all

    Before writing this, I took the time to research online, but no luck.

    I decided to buy the photographers CC package. downloaded the installer and moved forward with the installation, allowing to connect my Adobe ID and got the error:

    "Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again. »


    I don't use any antivirus or firewall, and there is no redirection port to my internet connection.


    The software has been installed in a Mac Pro 2012, running the Mavericks 10.9.5. I completely uninstalled Installer used a CC cleaner App. Also went under the ~/Library/Application Support and ~/Library/Preferences moved these .plists for another clean installation but without success.


    Any help will be greatly appreciated.

    Thanks in advance for your help.



    Hello Mohit,

    Thanks for the link, but it was driving me nuts and takes me too long to understand. So, I saved all my work and formatted my hard drive with a new installation of Mac OS x.

    That solved the problem.

    Thank you all for your comments!

    Pedro

  • Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

    Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

    CS6 and below: How to access the features of Arabic and Hebrew in Photoshop CS6 - YouTube

    Creative cloud. CC to CC 2015:

    First install the value in the parameter of English/Arabic language: change the language setting of your Cloud Creative applications

    Then enable Middle Eastern features in Photoshop: How to write in Arabic in Photoshop CC (and other adobe programs)

    I would like to know if it works.

    Gene

  • "Impossible to reach on the Adobe servers. Check your firewall settings, and then try again in a few minutes. »

    I just bought the 1 year paid in advance with all Adobe Adobe Creative Cloud applications. But when I downloaded it, it said "unable to reach the Adobe servers. Check your firewall settings, and then try again in a few minutes. "I'm on a connection high speed of my PC directly on my Modem. But it worked when I tried on a laptop computer connected to the router.

    I have already added exceptions for all adobe in my Windows Firewall and Norton firewall. I tried to uninstall and remove all adobe, but no luck :/

    Any suggestion would be great.

    I did some more research and found out it had to do with my hosts file, it was blocking adobe breaks. So it's fixed! Thanks for the quick response even when

  • I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the

    I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. Art seems to be fine and the host site says it's probably coding error. What should I do?

    Hello

    Have you tried a few steps in the following article

    "Some files on the server may be missing or incorrect" Warning Message

    See if that helps. Let me know if you have any question.

Maybe you are looking for