Dysfunction of Qosmio F10 Windows MCE TV Tuner

Hey everybody

I use a Qosmio F10. Now for a few good years, anyway he came the age old time do a restore cd revovery just to speed him up again and the dealer him a new lease of life.

Everything worked fine after the relocation outside the TV in Media Center, there is no option to watch TV in the program, and whenever I try to go into the settings of the TV I get the message "the tuner is defective or not installed. Please make sure that the tuner and a driver are installed. »

I installed the latest driver, and I can get the TV running using the Qosmio player, so the problem seems to lie with Media Center. I don't know what else to try, everyone has to get suggestions?
-Stu-

Hello

Have you installed all the updates?
In addition, the TV tuner driver you will find on the page of the Toshiba driver is designed for MCE. AFAIK the Qosmio player uses the own TV tuner driver.

The pilot on the Toshiba page has been changed to 08/01/05. It s a 1.0.26 version.

Tags: Toshiba

Similar Questions

  • Qosmio F10-125: MCE Rollup 2 update KB900325 failed

    Hello

    I try to update my Windows XP Media Center Edition with update Rollup 2 (KB900325), but the process is broken
    I get the message:
    "The update to Media Center has failed. The computer will be restarted to the State which was before the update. "If please try installing again or contact the manufacturer of your hardware for assistance if the problem percists.
    I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer, because Microsoft recommends that before installation,
    but I can't install the update anyway. When I run the upgrade (WindowsXPMediaCenter2005-KB900325-usa), the process begins, installs the hotfix KB895572 and KB891593, and after that stops when the process tries to Install Hotfix KB895961
    My system is Microsoft Windows XP Media Center Edition Version 2002 service Pack 2.

    My laptop is Toshiba Qosmio F10-125.
    Can you halp on this problem.
    What should I do? Why the update installation has failed every time.

    Post edited by: konstanF10

    I found the advice of Microsoft, how to install the cumulative update 2 for MCE KB900325
    http://support.Microsoft.com/kb/900325

    Microsoft says to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed.

    > I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer because of
    > Microsoft recommends that before installation

    Of course they recommend to remove this hotfix KB886904 because otherwise, installation of .NET Framework 1.1 SP1 will not succeed. But if you have already installed the Framework 1.1 SP1 you don t had to remove the hotfix KB886904.

    However, it is an area of Microsoft and I recommend you ask MS support why impossible to install the patches of singles

  • Qosmio G30 / Windows MCE 2005 + SP3

    Hi guys,.

    Had some problems with SP3 on Windows XP MCE 2005.

    Once installed my cable TV box is no longer works, continues to come up with an error.

    I read many forums with questions on MCE SP3, but none of the solutions have worked for me...

    Anyone had problems?

    Matt

    Have you had problems with SP2?
    Of course, it could be that there is no problem with SP3 on MCE.

    And what error you get exactly?

    Search on the site of Toshiba for the driver and BIOS updates:
    http://EU.computers.Toshiba-Europe.com-online support => Toshiba download drivers

    Last but not least, look for an update for your TV decoder or reinstall it.

  • Can not find the driver for Qosmio F10-101 TV tuner

    Hello everyone,

    I bought a new Qosmio F10-101... since he has previously installed Win XP Home, I reinstalled the operating system XP Professional... this time the Device Manager is to give a warning to a PCI device that is supposed to be the TV tuner... I'm looking for the TV tuner driver which works on XP Pro... any help is appreciated...

    Thank you...

    JUST GO TO THE DRIVER DOWNLOAD PAGE OR TYPE:
    http://support.toshiba-tro.de/tools/Qosmio/F10-G10/MCE/TV-tuner-XP-1020.zip

  • Qosmio F10: How to record audio and video and use QosmioPlayer

    I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

    The questions are:
    1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

    2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

    3. I only use VIDEO IN to WATCH is not to save: where is my fault?

    Thanks, Marco

    Hello Marco

    I did some testing and I can tell you about my experience on Qosmio G20.

    1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

    It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

    I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
    2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

    Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
    3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

    Good bye

  • Qosmio F10-128 with bad reception of TV in MCE

    Hello
    I have a Qosmio F10-128 on the loan and have a problem with a TV tuner in Windows Media Center.
    During the configuration of the computer, everything seems ok, but when I try to watch a channel of the image is very poor with many artifacts and no noise.

    The strange thing is that everything is working fine with the Qosmio player.
    I have tried every setting in MCE.
    All connections are fine and as far as I know all the settings are correct.

    I live in Belgium, then uses the PAL settings.
    Do you have any suggestions?

    Many thanks in advance,

    L.

    Hi LVG

    What type of antenna is connected to your Qosmio? Is it a cable TV?

  • Qosmio F10: Cannot set up the TV Tuner!

    I can't be able to receive any form of TV on my Qosmio F10 signal.

    I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

    I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

    All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

    Someone else had this problem?

    Any ideas?

    Ok... No one has any ideas, then!

    Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

    They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

    They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

    As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

    Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

    I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

  • Qosmio F10: TV tuner pal/Secam

    Nice day

    One of my friends has a Toshiba Qosmio F10 of France in Ireland. Everything works fine except for the (tuner) tv.

    I read in a previous thread on how to get a tv signal in the Qosmio player which worked for me as well.

    Problem is that this signal is "encoded" and now that I know a bit more about the standards of television used in Europe, I'm pretty sure that the tuner is set to Secam (laptop was purchased in France, after all).

    Anyone who knows how I can configure the PAL standard.
    The fact that this machine is the french version of XP MCE is not help either that my french is rusty to say the least.

    I know that Gettysburg mentioned in a previous thread that manually operated standard tv, too bad he doesn't explain how :-)
    Only that I can find is I NTHE bios but it is only for the tv (pal or ntsc), then that does not work either.

    Please help me, frustrated here, not a good thing...

    Hello

    as far as I know the series Qosmio with MCE and TV tuner is specific countries because in Europe there are different standards of television for each country!

    Sorry!
    Bob

  • Qosmio F10: How can I install Win XP MCE 2004 again

    Hello

    I have a problem with my recovery dvd - rom supplied with my laptop TOSHIBA QOSMIO F10. I bought in London, message of cams of upward on the screen error "\WINDOWS\SYSTEM32\CONFIG\SYSTEM / Windows didn't start because the following file is missing or damaged '

    But now I live in Brazil, so how can I install again my operation system XP MCE?
    Because I have the OEM software pre-installed in.
    Can someone help me please?

    Don t understand why you open a new topic!
    You have already posted this here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25711

  • No tuner = no S-Video capture! (Qosmio F10-101)

    I just bought Qosmio F10-101, which comes without a TV tuner. I tried everything to save my VCR to the computer's S-video input, but this is not possible. I have already installed the registry patch and I tested several applications like WinDVD Creator video recording supplied with the machine, they do not all video input ports.

    The main reason why I bought this machine, it's that I thought that the S-video input could be used for recording the video on the hard drive. But it seems that this is not the case.

    So, I'm supposed to return the unit for another model? Or is there a workaround to record a S-video input to the hard drive? Please, remember that this isn't a TV tuner.

    TIA

    Hello Tia

    Since last week, I got a new Qosmio F20. I want to do the same thing as you. At the moment I am not familiar with this, but the Qosmio forum, you can find many discussions on this topic.

    Try to pick up some information.

    Good bye

  • Qosmio F10: Forgotten my password Windows XP - how to reset?

    Hi all

    I haven't used my Qosmio F10 in addition to four months and the last time that I used it I had to change the password, but now I foolishly do not remember it.

    My account is the only account on the laptop, so I am also administrator. Is it possible that I can find out or reset the password?

    Thank you very much

    Hello

    Cannot delete the administrator account on Windows XP. You need to reinstall new OS to get access to the new created admin account.
    Simply start the installation from the Toshiba Recovery CD and the new operating system must be installed in a few minutes.

    But note; the new installation format the whole HARD drive so if you have important files on the HARD drive you back up data.

    In this case, you could remove the laptop HARD drive and it could connect to another computer via the external USB HDD controller to transfer the files to the second computer HARD drive.

    See you soon

  • Qosmio F10 series: tv tuner driver for linux

    Hello

    Sorry for my 'English', I hope that you will understand me.

    I installed Mandriva on my Toshiba Qosmio F10-128 but I'm looking for the driver for the tv tuner, and I'm also looking for a tv software that will run with this type of tuner.

    Does anyone have an idea?

    I heard that Qosmi Player is based on linux so I guess that a linux for a tv tuner driver is available, but I can't find on the website of toshiba :'(

    Ben

    Hello

    Sorry, but I don't believe you can find this kind of information somewhere. Maybe you should contact the service partner. A few technicians can give you this kind of information.

    Good bye

  • Slow down the TV Tuner on my Qosmio F10

    Hello
    I have a Qosmio F10 which comes with a tv tuner. The software that comes with it to watch TV is Inter WinDVR 5 video. But the problem is that this software seems to be very slow, changing channels takes like 5 seconds to go from one channel to the other...
    Someone know how to resolv this problem? Or do I have to use other software and if so, which? (I tried to download some software on the internet, but none were compatible with the card provided with the Qosmio.
    Thank you.

    Hello

    I really never heard this kind of question. It will be interesting to know what Qosmio F10 you have. Most of the Qosmio laptops comes with edition of WMC and Qosmioplayes. Two of them allow you to watch TV programs.

    If you can give us more information on your device, please write again and if there is a solution to your problem, it will be interesting to know how you solved it.

    Good bye

  • Video capture without tuner TV Qosmio F10

    Hello

    I have a Qosmio F10-101. It does not include a TV tuner, but I have composite and s video in. How can I capture any film?
    Please I really need help!

    Hello

    And which device must be the source of the video signal?

  • Qosmio F10-101 does not have a TV tuner

    Hello

    I bought my F10 about 2 years ago. It is actually a F10-101. I picked the local official Toshiba site (Turkey). On the web page, he said that F10 comes with a TV Tuner (such as all the Qosmios). Also I checked it on the site of toshiba - Europe.com. The local page was actually just a copy/paste of the toshiba - Europe.com

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=98310&DISC_M OD = 1 & service = EU

    2-3 days later, I bought the computer. Since I knew that the specifications, I didn't ask questions. When I got home, I realized that there was no TV Tuner on my machine, or remote control. I called the dealer that I bought, they said that none of the F10s have TV Tuners.

    I sent to the local distributor of Toshiba on the problem, why this is so. They do not even condescend to answer. The TV Tuner functionality is also excluded from the site 2-3 days later (I also sent Toshiba International, but I was told to contact your local Distributor).
    I didn't actually buy my Qosmio for its TV Tuner functionality. But this isn't what Qosmio is made for?

    I didn't have to return to the computer dealer, because it is a very good machine in addition to its multimedia capabilities. I say "was" because of some problems of motherboard, I am facing nowadays. I'm a little start to Brown it off.

    What would you do if the same thing has happened to you?

    Hello Cagri

    It is well known that you have time to 14 days for the product if you are not satisfied. I don't know how it works in your country, but here where I live I can bring it if I am not convinced. I will also say that after buying a new product each of us should check the product, and if something is not as described in the product description, we must respond as soon as possible and dealer.

    Qosmio F10 does not work for me because it's one of the first laptops Qosmio but one thing confuses me. According to the specifications of the laptop it comes with WXP Home. Am I wrong? As far as I know to use the TV tuner you need Media Center Edition.

    Sorry, but it's really not easy to be objective enough. After 2 years is now too late for all the complaints. I just hope that you still like your toy and I have a lot of fun with it.

    Good bye

Maybe you are looking for