E-mail accounts are lost when I close it. Accounts are not saved?

Similar Questions

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• I forgot the password and secret your answer, and my e-mail account does not work

  I forgot the password and I forgot the secret answer also, and my e-mail account does not work. I just my alternate email account, but my password is not sent to my alternate email account. any body can help?

  Call your e-mail server. Bruce Hagen ~ MS - MVP [Mail]

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• Why the titles are not saved with the project? Where are they?

  CS5 PC.

  Why the titles are not saved with the project? Where are they? I can save them with the project?

  You can also configure a project basis including all titles.  When it's time to start a new project, open the template and change the name before starting to work.  In this way all the foundations are in place without having to implement the project with these basics every time.

• Why updates are not saved?

  It is really essential for all of us who use an internet slow (3G mobile)

  If we have to reinstall Windows, after this, we again to download all updates, also as Servicepacks, 1, 2, and 3, if you use an older version of XP.

  Why do these updates are not saved in a special file for re - use?

  (I noticed the same problem in Win7, my laptop, the updates where about 1 gigabyte if I remember right and which consumes a lot of time for me and all license surf-amount for a month, I had to pay extra to be able to surf after that for more bytes-surf..)

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/the-last-update-caused-huge-problems/af0fd0d0-29a7-4c3e-b865-7ac7a7225fcf

• Downloads are not saved. Windows 7 Home Premium. Refurbished.

  Downloads are not saved. Windows 7 Home Premium. Refurbished.

  In IE11, use the option "Save as" and specify the location / folder you want to save the download. Once the download is complete check to see if the downloaded file is in the specified folder.

  You can also try another browser such as Firefox to see if you are able to save the downloaded file.

  J W Stuart: http://www.pagestart.com

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• "Flash cookies" are not saved

  Hello

  I use Windows 7 SP1 + IE11 with flash version 14.0.0.176 (language: French).
  New installation.

  Flash files/cookies are not saved. It is visible in the flash games: Save do not work.

  I found a test on this site: IE10 Test Drive demo: Flash Cookies which shows all saved flash cookies on my PC.

  I searched several forum without finding any solution.

  For example: I checked in the control panel of the flash, this web site are allowed to save the file. I checked that an "infinite" amount of storage is also permitted. I've seen similar topics, unanswered in this forum. I searched the file from the GROUND, but they never appear.

  But maybe I missed something. I'd appreciate a solution!

  The fact that the C:\users directory is redirected (link) to another location to do something?

  Additionally, some flash apps work at all. A few videos embedded in the information site do not begin for example. Some games are starting to launch, but never start.

  Thanks in advance!

  Joe

  I now had the chance to try this and it does not work for me. Seems that my installation of Flash is really messed.

  I edited the mms.cfg in C:\Windows\SysWOW64\Macromed\Flash. There now:

  SilentAutoUpdateEnable = 0

  AutoUpdateDisable = 0

  EnableInsecureJunctionBehavior = 1

  Mode of enhanced protection in Internet Explorer is not verified.

  I restarted the computer.

  And I still have the same problem of creation of the cookie. I get no error message, but the cookie does not appear. Flash seems eager to create directories for the sites I visit, but I have no file cookie in them.

  Please try to fix this. Looks like it is time to try to place my junction point and move everything on the C: drive. Maybe, I'll try to uninstall and reinstall Flash once more...

  Mark

• How to force TB request password for an e-mail account? (Not main password, it's ok)

  For some reason any TB stopped to ask the password for one of the set up e-mail accounts. How can I do TB ask the password for this account?

  I'm not using password manager, I checked that the pw Manager there is of course no password that are stored.

  Simply, TB has always called for the IPL to each account at startup. TB does now for all my accounts except one.

  Thank you.

  Do you receive your mail from the server without entering your password?

  When you go in Thunderbirds saved page password is empty?

  If Yes, to both questions, you get another software Vault password on your computer. Mail servers allow access to e-mail without connecting accounts and requiring a password somewhere.

• Windows Live Mail - E-mail which are not sent but I can't find to remove

  I was on Facebook and saw a picture that I wanted to send an email to a friend.  I click with the right button on the picture and chose "electronic image".  My form of direct mail jumped upward and in front of it, a sign in the shape of Windows Live Mail.  I clicked out of it I already signed in and used the pop up form - looked exactly like my mail normal and had my contact address for my friend available.  I sent it to my friend.

  Since then, I can't send anything to my Live Mail account, and it's one I use all the time.  I get a message that says: cannot send email photo.  But I can't find where to delete to clarify the matter.  There are now 4 emails that cannot be sent as I tried to send a couple to see if it was just the photo email.

  The email problem is not in my sent box or my project.  I saw in the application of another person for the help it has "found a shipping box that he did not know he had" but he doesn't say WHERE he concluded that.

  I really need to get rid of this email so that I can send my Windows Live Mail account.

  Help, please.

  Marion

  Never mind.  I just found the Outbox - for others - scroll right past all your "envelopes" etc and it's there on the left side of the screen.  Sigh.

  Problem solved.

  Good news - I didn't know that this community was so will come by next time when I'm doing something very stupid. Laughing out loud.

  Marion

• IMAP e-mail accounts does not connect

  Just recently my iCloud, Gmail and Outlook IMAP accounts does not connect through the app Apple Mail on my MacBook Pro running 10.11.6. I get a popup error message and exclamation points appear next to each account that States the unable to connect to the server application. IPhone & iPad with the same accounts are fine, just my Macbook Pro has this problem. Connection Internet is fine. Suggestions?

  Please read If you cannot send or receive e-mails on your Mac - Apple Support.