E-mail notification

Hi all

I received on my email notification they found my phone after losing it for two months.

The email looks like a good, even the site when clicked.

Here is the site that I re - direct to:

http://icloud-lostMy.info/?location=f6a63

If it is a copy, I am amazed by the copy cat!

Could come back you to me, if it's a good thing or not, if not stop it.

Kind regards

Jblarrieu

I think it would be prudent to provide a screenshot of the site in question, so that anyone in the community can help you more, compared to post a link to the Web site as will be more reluctant to click on it for obvious reasons.

If I have to give an opinion, just to look at the link, I must say it seems dubious to me.

See these links for help- https://www.apple.com/legal/more-resources/phishing/

Identify the fraudulent 'phishing' - Apple Support e-mail

Tags: iCloud

Similar Questions

  • How do I just get messages from the Inbox to show the new mail notification?

    I install Thunderbird with Gmail and it works like a charm. The only complaint I have is that the new mail notification seems to grasp a selection of emails unread from different folders and often it does not show the new relevant emails in my Inbox. ESP. the all mail folder seems to provoke the doubling of message notifications, but this isn't the only one.

    All I want is my Inbox for new e-mail notifications. Is there anyway to change the current behavior?

    And there is no solution to limit the mail in a particular folder Inbox or other, so I suggest ur stuck.

    This add-on could help https://addons.mozilla.org/en-US/thunderbird/addon/xnotifier/?src=search , but I have really no idea.

  • When I get the message/e-mail notification, my camera flashes

    When I get the message/e-mail notification, my camera flashes

    Hello

    Follow the instructions to turn off the alerts of Flash LED here > http://www.imore.com/how-to-turn-on-led-notification-light-iphone

    Or tap Settings > general > accessibility > Flash LED for alerts.

  • Mail notification on phone family member

    I have family and a member receives my email notifications and can actually access only if they slip. However, they have no access to my email otherwise. How can I stop this from happening?

    The family has nothing to do with email.   E-mail account which you are referring?   The only way to e-mail notifications occur is if this account is installed on this phone

  • E-mail notification of silence Droid4

    How to transform the sound e-mail notification?

    I actually think that the sounds of notifications for Gmail are hidden in a ridiculous way.

    Open Gmail > Menu > more > settings > [If you have multiple Gmail accounts, choose a] > labels to notify > Inbox > ringtone.

    Not only is this really buried but -"tags to notify! Who thought this would be an excellent checklist?

    (Sorry. Stuff like that makes me crazy...)

  • E-mail notifications

    Our company uses UTM25 and strive configure the system to use mail notifications settings. I read in several other threads, it requires the use of the SMTP port 25, which does not seem to be supported by a large number of major email service providers (gmail, hotmail, etc.).

    What I have to put in place a special Exchange Server just to send an e-mail from this router? Why can I not use other ports? The admin for our society, it is important that every day I receive alerts of the UTM without having to log on and run them manually.

    BTW: I use an outdated firmware version, but as far as I can see the update notes, new versions of firmware have nothing to do with the SMTP port used for the email notification.

    Thanks in advance!

    dwhittington wrote:
    Our company uses UTM25 and strive configure the system to use mail notifications settings. I read in several other threads, it requires the use of the SMTP port 25, which does not seem to be supported by a large number of major email service providers (gmail, hotmail, etc.).

    What I have to put in place a special Exchange Server just to send an e-mail from this router? Why can I not use other ports? The admin for our society, it is important that every day I receive alerts of the UTM without having to log on and run them manually.

    BTW: I use an outdated firmware version, but as far as I can see the update notes, new versions of firmware have nothing to do with the SMTP port used for the email notification.

    Thanks in advance!

    Try upgrading to 1.3.7 - 0 and then do an update to 1.3.14-0. offline
    You should be able to specify the port now.

  • Need to get the sound e-mail notifications in Outlook Express

    I would like to get the sound e-mail notifications in Outlook Express and can not know how to do this.

    Original title: artachoke47

    Tools | Options | General tab check: play sound when new messages arreive.
     
     
  • I get my Facebook group e-mail notifications in my Inbox, but all other Facebook notifications go to my junk mail.

    original title: "Windows Mail" and Facebook notifications

    I get my Facebook group e-mail notifications in my Inbox, but all other Facebook notifications go to my junk mail. I put in my list of shippers and also the area for a week. Nothing helps. I double checked Facebook and everything is checked ok there. I'm going crazy trying to figure this out. Anyone else having problems?

    Well, you can look at this thread and what the user did there: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-phishing/4a5c8a1f-a224-444a-8639-4334a7ec4251#footer

    Steve

    I read the comments here, thank you. I thought I had turned off the "no automatic filtering. I have now found phushing and turned it off. This works! Phew...

    Thank you very much, Steve.

  • Is it possible to e-mail notifications in EMI filter

    I enabled notifications in EMI, and it's writing me every event. I created a filter action event to the X-ray source and subtracts all actions. Since I subtracted all the actions that I don't see any events for X-ray source under the supervision of events, which is what I wanted, but EMI still emails me the events caused by the source X. is there a way to filter/disable e-mail notifications based on the IP of the attacker?

    Hi Henries

    I'm afraid not. As Email notification works on the basis of the level of risk and the alert level (high, medium and low).

    You could just mention what content you want to see in this notification and check which is how you activate box specific to a different entity.

    Rate if she responds to your request.

    Kind regards

    Akshay Rouanet

  • E-mail notification HELP blackBerry smartphones

    Can someone help me with the problem I have with my electronic mail notification sounds.  I checked all notification profiles are defined on but my phone still does not give me an alert.  Anyone have any ideas?  I also try to put one of my sounds saved in my music of alerts by e-mail and I'm wrong.  I'd appreciate any help

    Well, with the 4.5 OS, you can use JL_Cmder and his choice of the factory setting.

    Download here: http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  • 4.2 ACS e-mail notification

    Hi all

    is - it possible configure ACS 4.2 e-mail notification alerts.

    Email notification can only be configured for these alerts when a service goes down. If you want to receive these alerts by e-mail, then go to > system
    Configuration > Active Service ACS management.

    Rgds,

    Jousset


  • New mail Notification

    How can I disable new-mail notification in Windows Live Mail 2011?

    Menu button. Options | Mail | General tab uncheck the appropriate box.
     
     
  • using Oracle job e-mail notification

    Hello

    I am trying to configure a job e-mail notification using Oracle 11 GR 2. By documnetation online, I made the following configuration, but email notification work is a failure. If you guys have any ideas, please help.

    Step 1:

    BEGIN

    DBMS_SCHEDULER.set_scheduler_attribute ('email_server', 'oracle.kotaise.com:25');

    DBMS_SCHEDULER.set_scheduler_attribute ('email_sender', ' [email protected]');

    END;

    /

    Step 2:

    BEGIN

    () DBMS_SCHEDULER.create_job

    job_name = > 'email_notification_job ',.

    job_type = > 'PLSQL_BLOCK ',.

    job_action = > ' NULL BEGIN; END;',

    start_date = > SYSTIMESTAMP,

    repeat_interval = > ' freq = minutely; BYSECOND = 0',

    enabled = > TRUE);

    END;

    /

    Step 3:

    BEGIN

    DBMS_SCHEDULER. () ADD_JOB_EMAIL_NOTIFICATION

    job_name = > 'email_notification_job ',.

    recipients = > ' [email protected] ',

    sender = > ' [email protected] ',

    subject = > 'Scheduler Job Notification-%job_owner%.%job_name%-%event_type%. "

    body = > ' event_type % occurred at % event_timestamp. ERROR_MESSAGE %'.

    events = > "JOB_FAILED, JOB_BROKEN, JOB_DISABLED, JOB_SCH_LIM_REACHED");

    END;

    /

    Step 4:

    I created the following post that runs a package that runs a package "test_package.pdata". This package is not created yet, because I wanted to see if the email notification works or not. As expected the 'TEST_JOB' failed due to missing package. But notification email '' email_notification_job' ' work, which takes place every minute, cannot send an e-mail notification.

    BEGIN

    SYS. DBMS_SCHEDULER. CREATE_JOB

    (

    job_name = > 'test_job '.

    , start_date = > SYSTIMESTAMP

    , repeat_interval = > ' freq = minutely; BYSECOND = 0'

    , end_date = > NULL

    , job_class = > 'DEFAULT_JOB_CLASS '.

    , job_type = > 'PLSQL_BLOCK '.

    , job_action = > ' BEGIN test_package.pdata; END; »

    , comments = > NULL

    enabled = > TRUE

    );

    end;

    /

    I questioned the DBA_SCHEDULER_NOTIFICATIONS table, and I see that email notification work has not begun.

    JOB_NAME EVENT RECIPIENT

    EMAIL_NOTIFICATION_JOB [email protected] JOB_FAILED

    EMAIL_NOTIFICATION_JOB [email protected] JOB_BROKEN

    EMAIL_NOTIFICATION_JOB [email protected] JOB_SCH_LIM_REACHED

    EMAIL_NOTIFICATION_JOB [email protected] JOB_DISABLED

    Thank you

    OK, now I understand your lack of understanding

    The ADD_JOB_EMAIL_NOTIFICATION procedure relates to employment that you specify in the parameter job_name. In your case, e-mail notifications will be sent against your email_notification_job, no test_job. You must use the ADD_JOB_EMAIL_NOTIFICATION for all the jobs you are interested in the result. So if you are interested in the results of running TEST_JOB, then you must specify this work for the ADD_JOB_EMAIL_NOTIFICATION procedure.

  • OIM11G R2 PS2 e-mail Notifications

    Hello

    I would need to use notifications by e-mail in the following:

    (1) implementation of workflows

    (2) approval process

    (3) of the plugin, treat code tasks

    What is the best approach I can use?

    I see that there are three different notification services providers: composite UMS, SMTP, and SOA.

    I wonder, what is the difference? Which should I use?

    Thanks for your help,

    Sash

    Hello

    Yes, there are several ways to send notifications in 11 g R2.

    For the provision of workflows and plugins, you can use: Oracle Fusion Middleware security: OIM 11 g Notifications

    For the composite SOA, see sample available to the support site: Custom SOA task workflow and Notification by Email (Doc ID 1494863.1)

    The UMS is the best way to e-mail notifications. For more details, please visit: Service of Notification of management - 11 g Release 2 (11.1.2)

    ~ J

    Note: Please check the useful/correcting, so that it can be useful for others.

  • 11 GR 2 IOM - receiver setting E-mail Notification service

    Hello

    I use the notification e-mail Notification service. There is a case where I would have to send a notification to a DL or external mail that has not only any account in IOM. I find nothing in the API where you can configure the e-mail of the receiver instead of the user ID.

    No idea how this can be done by using the Notification Service?  I know that we can create a user account and assign this email ID to that account and try, but I would like to know how we can achieve without doing this or is there one way other than completely using java code.

    Thank you

    The IOM OOTB API does not support the user ID instead of any DL or identifying external mail.

    Its best to create a service account in IOM corresponding to these DLs/external mail and use OOTB IOM API to send mails using the user ID.

  • A script for the e-mail notifications to all detectors of vCenter device 54 default works as expected, however it ends with an error.

    Hello

    We test the automatic configuration of alerts by email of all the alarms of 54 by default since version 5.0 of the device of vCenter.

    Since this is something that we intend to do on all the installations/upgrades, it can be a time-consuming task having to manually set each alarm set on each vCenter so I indicated to an article in the blog of VMpros which appears to address a similar task and who suggests using PowerCLI script to take care of this:

    http://blog.vmpros.nl/2011/07/04/VMware-change-alarm-actions-with-PowerCLI/

    I fixed the script from its original version because it shouldn't change certain actions of alarm to send alarm notifications at a different e-mail once a week. Instead, we will propose a one-time activity.

    After configuring vCenter server connection information and change the e-mail addresses, I have successfully tested the custom script to add notifications by e-mail to a test alarm (named "Test alarm") to a simple action, that I had created earlier (turn on/off a virtual computer in our laboratory). The added script notifications by e-mail to our alarm test as expected without error.

    Before you change the script to add e-mail notifications to all 54 defect detectors as needed, I decided to test the custom script against one of the predefined alarms (named 'Host the status of material power'). While the script added notifications by e-mail to the alarm 'Material receiving power status' as expected, he finished with errors.

    I just want to make sure that our custom script contains no script errors before using it on all the installations/upgrades (any suggestion or criticism is welcome).

    I pasted the error resulting from the prompt of Windows PowerShell commands below.

    Thank you and best regards,

    Massimiliano

    ==================================================

    PowerCLI D:\ >.\Change_Alarm_Datacenter.ps1

    Action Type Trigger

    -----------     -------

    SendEmail...

    SendEmail...

    SendEmail...

    New-AlarmActionTrigger: 21/05/2012-16:35:11 new-AlarmActionTrigger A

    specified parameter was incorrect.

    D:\Change_Alarm_Datacenter.ps1:37 car: 82

    + Get-AlarmDefinition-name '$actAlarm1 ' | Get-AlarmAction | New-AlarmActionTri

    walking landing < < < < - StartStatus 'green' - EndStatus "yellow."

    + CategoryInfo: NotSpecified: (:)) [-AlarmActionTrigger] new, Inva)

    lidArgument

    + FullyQualifiedErrorId: Client20_AlarmServiceImpl_NewAlarmActionTrigger_

    ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Alarm.NewAlarmActionT

    rigger

    UID: /VIServer=administrator@vcenter5:443/Alarm=Alarm-alarm-17/SendEma

    ilAction = 1508771755/AlarmTriggeringActionTransitionSpec =-83030421

    6.

    StartStatus: Green

    EndStatus: yellow

    Repeat: false

    AlarmAction: SendEmail

    UID: /VIServer=administrator@vcenter5:443/Alarm=Alarm-alarm-17/SendEma

    ilAction =-1903891658/AlarmTriggeringActionTransitionSpec =-8303042

    16.

    StartStatus: Green

    EndStatus: yellow

    Repeat: false

    AlarmAction: SendEmail

    UID: /VIServer=administrator@vcenter5:443/Alarm=Alarm-alarm-17/SendEma

    ilAction =-1765994019/AlarmTriggeringActionTransitionSpec =-8303042

    16.

    StartStatus: Green

    EndStatus: yellow

    Repeat: false

    AlarmAction: SendEmail

    ==================================================

    Okay, I think I found the problem.

    You set 3 actions on this alarm (3 x Email).

    This means that it

    Get-AlarmDefinition -Name "$actAlarm1" | Get-AlarmAction
    

    Returns 3 objects (one for each action).

    Unfortunately, the New-AlarmActionTrigger cmdlet wants 1 as input Action, not a table object.

    The solution is to select the Action of explictely for which you want to change the trigger.

    Something like that

    Get-AlarmDefinition -Name "$actAlarm1" | Get-AlarmAction | Select -Index 0 | New-AlarmActionTrigger -StartStatus "Green" -EndStatus "Yellow" Get-AlarmDefinition -Name "$actAlarm1" | Get-AlarmAction | Select -Index 1 | New-AlarmActionTrigger -StartStatus "Red" -EndStatus "Yellow" Get-AlarmDefinition -Name "$actAlarm1" | Get-AlarmAction | Select -Index 2 | New-AlarmActionTrigger -StartStatus "Yellow" -EndStatus "Green"
    

    Beware, the script does not remove the old triggers, so you will end up having several triggers for actions.

    First use the remove-AlarmActionTrigger to remove any existing triggers.

Maybe you are looking for