E/s Ethernet between two computers

Similar Questions

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Content of mail to sync between two computers

  Is it possible to synchronize the content of mail between two computers [iPhone, if possible]? Computers currently send and receive the same two e-mail accounts [not an account of @iCloud.com]. But if I receive an email, reply or remove it on a single computer, it is always also a new email unread on the other. It's a possibility, perhaps with a disc of individual cloud?

  Late 2008 MacBook Pro. El Capitan 10.11.3

  Mac Mini; El Capitan 10.11.6

  iPhone 6; IOS 9.3.5

  Thanks in advance for any help.

  Only IMAP e-mail accounts sync on devices. That's how to operate these services - nothing else is required to achieve this.

  If your email is responsible for no synchronization across all computers and devices, you must have type accounts pop connect you to these accounts via a web browser and look at your options and account services. POP is such an old system these days there is almost nobody left that enemies do not switch to IMAP.

  If all this is confusing, call your email providers and ask them to make the change on their end, then ask the information you will need to enter on your computers and your iDevices.

• Is it possible to synchronize a directory between two computers using ReadyCloud Desktop Client?

  Hi all

  Is it possible to use the ReadyCloud Desktop Client to synchronize a directory between two computers, i.e. of office and computer laptop?

  I use OS 6.4.2 and the latest version of the Desktop Client at ReadyCloud.

  In addition, both computers are running Windows 10 Pro.

  Thanks in advance

  Kevin

  Hello knocwans,

  Sorry, but ReadyCloud app is designed to allow you to synchronize folders computer device ReadyNAS and not from computer to computer. There is no option on the client where you select as the source computer and another computer as the destination.

  Kind regards

• GPIB communication between two computers

  I try to communicate between two computers via GPIB. A computer to send an order, the other will receive, save and then respond accordingly. This response will then be received by the first computer and displays (this is the emulation of a device, the real need is to communicate with a satellite TT & C)

  I realized all of this. However, to be in listening mode I wired a property node with a timeout-infinity (1) before reading. Now I can't leave the VI as he is still stuck in playback until the receipt of an order.

  How can I get out of the VI when he's stuck in playback function.

  PS: Using GPIB for communication is a requiremnet of ht eproect and cannot be replaced.

  Hello

  You can have the timeout of read and then clear the error and keep looping until you get a message.  And then you can use arithmetic consisting of stop the loop if you click on the stop button, or get one error other than a timeout, or if playback returns data.

  If it works for you?  I joined your 'writing and then read.vi' with the added code.  Double check my logic, I'm sure it's just but not run it.  Also, if you return a large amount of data make sure that the time-out period is sufficient.

• How to use the utility "Windows Chat" Window XP (between two computers or more)?

  How to use the utility "Windows Chat" Window XP (between two computers or more)?

  Please provide your suggestion step by step

  Hello

  Maybe this can help, http://support.microsoft.com/kb/308232

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Remote access share folder between two computers

  I have two computers connected by a CAT5 cable, have all two firewall is enabled. This network has a server, DNS & DHCP server or router. Only two computers XP SP3.

  • Firewall is enabled
  • File sharing and printer checked with selected custom list

  Two types of tests:

  Test 1: I configured two computers with a static IP address and enter the IP subnet 10.0.0.0/24 network in the custom list. The PC - A (10.0.0.1) and typing\\computername or \\IP_AddressPC - B (10.0.0.2) access. Access to shared folder has no problem with this setting.

  Test 2: I changed the dynamic IP address static IP on both computers and let XP itself generate dynamic IP 169.x.x.x. I went to the list of custom and changed in 169.0.0.0/16, this settings I'm unable to access the remote folder.

  • I could not access by \\IP_Address get a message error "network path was not found.
  • \\Computername took almost a minute to open a window, but he has now shared resources, such as file sharing.
  • I can ping by IP address, but could not ping by ComputerName

  Issues related to the:

  1. Class B is allowed in the custom list?
  2. Can I use the IP address dynamic Windows XP for the connection between two computers or on multiple computers?
  3. Why class C has worked very well and no class B?
  4. Is it because I used XP dynamic IP or custom list accesses no class B or both?

  Johnny

  Hello

  Part of a Wireless cable/DSL Router is a DHCP server.

  The server assigns the IP address to network computers are configured to Auto obtain IP address.

  If for some reason, the computer cannot connect to the router, it cannot obtain an IP address and Windows assign a default IP 169.xxx.xxxx.xxx. This IP address is not functional for regular internet IP and network.
  
  Since you don't have any DHCP server on your system, you must use static IP as you did before.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Sync Windows Live Mail between two computers?

  Hi, is anyway I can synchronize Win Mail between two computers as well as anywhere I have dl my emails from the server two editions of my mail live on PC - 1 and Pc - 2 show the same message in the box of reception and items sent etc.

  I use a private email Gmail integrated, connected via pop and smtp.

  also made Live mail 2011 work also on XP, and snacks, it can be I sync between a model of Win7 and Xp comp.

  Thank you

  Sunil

  For help on Windows Live Mail, go to the Portal customer Mail to the Windows Live Solution Center .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How do I telnet between two computers in a network?

  Original title: 'telnet '.

  I want to make a connection telnet between two computers in a network, please guide me.

  I want to make a connection telnet between two computers in a network, please guide me.

  See this to start by...

  http://Windows.Microsoft.com/en-us/Windows7/Telnet-frequently-asked-questions

  If you want to use telnet via the public internet, I highly recommend to use Secure Shell [SSH]. Free (for personal use) client SSH for Windows include the mastic and the TBM. Of course this assumes that you have a server SSH running on the remote network.

  http://www.Bitvise.com/tunnelier.html

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• How to avoid synchronization of the settings between two computers

  I have two computers (a desktop computer all-in-one DELL and HP laptop).  Log-in at once is my Microsoft account.

  PROBLEM: When I 'customize' screen on one, the same changes are made on the other.   It is not desirable.  How to avoid that, far from making a second Microsoft account?

  To clarify - the ICONS are not duplicated, just any changes made to the themes of office such as colors or backgrounds.

  Thanks in advance!

  Hello Beckinista,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to avoid synchronization of the settings between two computers.

  I suggest you stop the synchronization of all of the settings between two computers and check if it helps.

  Please see this link:
  Sync between multiple PCs with OneDrive settings
  http://Windows.Microsoft.com/en-us/Windows-8/sync-settings-PCs

  Note: Please see section "to stop all sync settings" in the article above.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Commnuication USB between two computers and air

  Hey all,.

  I was wondering if the communication between two computers usb is possible and that I would need to start.

  I want to connect two computers and send data via a usb cable. Prior app using wifi but the signal was not compatible and I need consistency.

  Thank you!

  Well, I found a solution to my problem.

  Used a few Arduino Miccrocontrollers and i2c with communication series to do the job:

  usbFlashSerialCommunication - YouTube

  Thank you.

• How to share internet connection between two computers (win7 & win XP)?

  "I plan to get cable internet connection ADSL broadband." And again, I want to share internet from one computer to another. »
  

  • But I have a question in mind which is lower.

  Before going to answer my Question Please read two notes point-
  
  Note:

  A. very important don't ask me what I have installed and what equipment I have in my PC? just give me a simple, easy answer. guess I'm no networking and I have two PCs. You teach me from scratch.

  B. do not use the more technical term. I hate it when someone using the most incredible technical term (its towers the response in the largest number of questions lol). just give me a simple answer.

  If you are eligible to condition or except my EULA :) go further and read my questions give me an answer simple and straight.

  Now please read the question below.

  Issues related to the:

  Q1. Which computer should I connect main internet connection (computer on which will better host win7 or Win XP)?
  
  Q2. What equipment I mean as a router, hub, NIC etc.? Please specify if these materials will be required for two PCs or for one.
  
  Q3. What type of Internet connection sharing will be better to be wired or wireless (cost, speed and security wise)?

  Q4. I need two IP address both part of connection to the internet between two PCs?

  Thanks in advance.

  Hi Zeff,

  You can make Windows 7 the main computer for internet connection and then host the Windows XP computer.

  For more information, see the article:

  Start here to set up a home network in Windows 7

  Networking of computers running different versions of Windows

  With respect to the equipment as a router, hub, NIC depend on the connection (wired or wireless) you want to use. You can also check with the ISP (Internet Service Provider) for more information.

  For more information, see the articles:

  What do I need to connect to the Internet?

  Setting up a network home

  Wired and wireless connections have great benefits, but they have also some disadvantages.

  Wired connection:

  > Faster and more robust than wireless connections but not so flexible when positioning of computers and devices because you must be connected to your Super Hub with an Ethernet cable.

  > Safer than wireless connections, but not so convenient for users of laptops and other mobile devices.

  WiFi connection:

  > Wireless! If you can connect when you want. However performance may be affected by walls, electric interference etc.

  > Ideal for users of laptops and other mobile devices, you can connect devices more but slower than wired connections

  > Very safe when used with higher level (WPA) encryption. You can connect your smart phone to your network wirelessly for faster browsing.

  However, unauthorized users could try to use your connection (which explains why security is so important).

  There are two types of IP addresses. external and internal. Both computers have the same external IP address but separate internal IP addresses. Each device in your network will have its own (internal) IP address. The external IP address, who sees the Internet is actually assigned to your router.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• making data transfer between two computers

  Hello

  I developed a labview for data acquisition goal program.  I need to run a part of my program in a computer and some said in another separate computer. for data transfer between these two computers, I decided to use the Protocol of data taking. a computer, collect data and send data to the second computer and second computer will control the setting of data acquisition in the first computer. now I have developed the program but it does not work. I wonder if that is enough to link these two PC by a network cable or something needs to be done. of course, I have some problems with the source definition in the Protocol of data taking. need two labview program in two separate computers.

  Best regards.

  the problem is resolved.

  transfer of data from socket, simply connect two computers with a LAN cable, as I did. The problem is the URL parameter. I got the error as follows:

  ==> in main and remote program, the URL must be the same and the computer name that data socket server is running must be incloded in the two URLS. (my mistake was that I had used two different URLS in the main program and remote). either way, I realized that this isn't neceessary to Server execution data socket in the two computer.but that that send data.

  concerning

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}