E1-571-33124G50Mnks Question

I think of the upgrade of the qraphics/video card in my laptop but I didn't know if I can replace my current laptops video card, I was thinking about getting a graphics card GeForce for it, this would be possible? my laptop is an Acer Aspire E1-571-33124G50Mnks thanks!

Why not?

Tags: Acer Laptops

Similar Questions

  • Satellite C50-A-571-two questions about download Toshiba drivers

    Hello all, great day... How's doin?

    I'm new to this forum, it is good to will here hoping finds the solution to every problem we face

    My first question is: why download drivers of "http://www.toshibamea.com/" is so slow and limited or something? It never ends download, I have always the connection interrupted when trying to download a driver, are there not other mirrors or something?

    Second question:

    Why are there so many useless drivers? as I put all my preferences, product type, family, model, series, and he gave me 33 pilot and some of them are not the drivers for my laptop

    I have a portable Satellite C50-A-571

    Hello and welcome

    I m not an expert but I'll try to offer my responses.

    1.
    As far as I know page of media you use is offered for the Middle East and Arica. I don't know where is the server placed but the download should not be problematic. In the past, I've used several times to check drivers and everything was OK. Perhaps there is a problem with your Internet connection.
    Toshiba support and download page is certainly not limited and can be used whenever you want.

    2.
    I ve checked the download page and found 33 results for Win7 64 bit so I assume you want to install this version of Windows.
    In any case all the stuff listed are not just pilots, but also specific tools useful to Toshiba and utilities. This tools and utilities to control some useful special features as feature special keys or the HARD disk protection.

    I recommend install you all of them and just have a total control on your machine. Of course if you don't like or don't need some of them they can be disabled or removed from the system.

    I hope that my opinion is useful for you. If you have any other questions you are welcome.

  • Acer Apire: E1-571-33124G50Mnks terrible Internet after reinstalling?

    I just bought a new hard drive for my computer laptop and installed windows and all the drivers needed. For some reason, the internet on the computer is terrible. The internet bar is normally 1-2 bar and will continually limited and start online games continuously. All other devices, including my second laptop get a perfect connection to the internet. What could be the problem?

    I stuck the antennas and the connection seems to be better.

  • Reinstalling Windows with the new hard drive - model: E1-571-33124G50Mnks

    I'm going to buy a new hard drive for my laptop because the disk hard was broken and must be replaced, if I put a new hard drive and install windows will I also need to install any drivers, BIOS/hardware and launch of applicationos? Thanks in advance!

    I found the solution, this site allows you to download all the drivers so you can add them manually, thanks anyway mate

  • Installing drivers model: E1-571-33124G50Mnks

    So I'm going to buy a new hard drive for my laptop and I do not want to reinstall windows 8.1 but I was told that I need to reinstall the drivers from acer for my model. I downloaded the drivers now what do I do? just do them on the computer as a configuration of the program when it the computer installed windows and works? Thanks in advance!

    Windows installation will install the drivers necessary for you, if none of them do not work properly, you can use the drivers from the manufacturers, yes you just downloaded driver made a right click and run as administrator after extraction if they are compressed, the files if they were .exe files, right click and run as admin.

    You can also download drivers Acer page download Acer support as well.

  • Replacement of the LCD E1-571-33124G50Mnks

    I buy a new LCD for my Acer aspire laptop, I found a good screen on Amazon and I need to be sure that it fits in my laptop, here is the link: https://www.amazon.com/gp/product/B003TQC3BG/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2J2RVYEZZOYEY

    I would like to know if this screen will go well with my laptop.

    Here are my screens features he wrote on the back (broken/original screen)

    Manufactured: 12/43

    Model No.: B156XW02 v.6

    In THE Optronics

    MADE IN CHINA (Z40)

    H/Wa F / l: 1

    I was more worried because my model number of screens says v.6 and one on amazon v.0, so thank you!

    Yes, it will work, seem best range in this model (60% compared to 45% currently).

  • Operating system problems

    My laptop is an Acer Aspire and the white sticker on the back says E1-571-33124G50MnKs, which is what I guess is necessary for a new post on these forums. My laptop had the hard drive completely fried, unable to be reused. The hard drive has had an impact and just stopped working. At the start, he says "Insert bootable device" and I had this happen with one of my other laptops before so I'm aware of what has past. But I just bought a new hard drive of the computer and I really don't want to have to pay all that money for windows 8.1. I read that a few discussions they suggest that acer remembers the key of windows product, is - it true? and if this is how I recover windows on my new hard drive? Thank you!

    IIRC the E1-571 uses UEFI bot by default, and it has stored the key. You should be able to install without problems. If you reinstall from the Acer restore image you will automatically get all good drivers and other institutions.

  • I have an Acer Aspire R7 - 571 questions.

    I have an Acer R7-571, 1.8gz dual core, and has 12 GB of ram. The computer is not as fast and is there any setings to the more quickly? I thought with 12 GB of ram, it would be lightening fast. Poor WIFI is another problem. Any ideas for that?

    You can try to disable the vitrual memory.

    System settings / advanced / / Advanced tab / Performance - Settings tab / advanced / virtual memory - change / don't put 'no pagefile.

    Click on set then ok and reboot your pc.

  • E5-571 graph Acer question?

    Hi all hope someone can help?

    Recently bought an Acer laptop E5 - 571 i5 which has integrated graphics Intel - 4000 HD.

    I installed Call of Duty United Offensive but I get a black screen when I try to run it, followed by a message saying

    "buffer overrun detected".

    Its an old game and works well on another laptop, a Lenovo Z570 running Windows 7 with an Intel integrated chip (3000).  I would have taken the Acer would also have no problems being more spec, but it seems that this is not the case.

    Googling the problem and I see that graphics drivers have been a problem with ATI cards, but there is no indication the integrated Intel has a problem.  Indeed, a more recent version of cod (Modern Warfare 2) seems to be on the list of Intel of games that work without problems with this particular configuration.

    Someone at - it a suggestions of what I could do to break this problem?  I have the latest drivers Acer and tried to run the game in different compatibility modes (Windows 7, XP, etc.) with the same result.  Am reluctant to the idea of trying to mess around too much with it as I have until Christmas to retrun the agreement of 30 days replacement.

    TIA

    Reg

    OK finally got sorted, seems to be a driver problem

    Had to use DIsplay Driver Uninstaller 13.5.3.0 download from Sofpedia.  Ran this and opted for claire on all display drivers and install a driver Intel stock.

    After a reboot, the graphics were then in Device Manager as a graphics card from Microsoft to address stock - I was then able to update the drivers by downloading and installing a driver more FORMER windows 7 since «VGA_Intel_10.18.1.3383_W7x64_A» Acer support site

    Had a little play manually install drivers... had to use the Zip file and force him to accept it, but seems this solves the problem of Buffer Underrun on the old Call of Duty games.

    Phil - Thanks for taking time to look over this and offer some suggestions

  • Questions of touchpad ACER v3 - 571 G after updating Windows 8.1

    Hi guys, I hope someone here could help me.

    I just upgraded to Windows 8 to 8.1 and immediately after, began having problems with my touchpad... It works, but too well.

    I can't turn it off via the control panel. I can't upgrade the driver...  I tried to remove the driver, but then my laptop required a reboot, and after rebooting, the cushion is fully functional and not deleted.  When I try to go into the properties and disable / enable all options, after restarting the computer, those changes are lost and I am to square.

    help... Please?

    Make sure you've got the directory drivers Acer pointed to the V3 - 571G for Win8.1 64-bit.

    Jack E/NJ

  • Scalability of memory Acer Aspire V3 - 571 G - 9686

    Hello

    There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:

    SPD EEPROM (DIMM0) information

    Manufacturer: ston

    Part No.: 56X64D3S13C9G

    Serial number: 146718E64C0018E4

    Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

    Format: IMM (67.6 x 15)

    Size: 2048 MB (ranks 1, 8 banks)

    Buffered module: No.

    Registered module: No.

    Module SLi Ready (EPP): No.

    Module XMP: No.

    Module XMP 2.0: No.

    Width: 64 - bit

    Ability of Error Correction (ECC): unspecified

    Prefetch buffer: 8 bits

    Manufacturing: Week 10, 2012

    Temperature probe: no

    Heat spreader: Yes

    Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

    Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

    TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

    -------------------------

    Information SPD EEPROM (DIMM1)

    Manufacturer: your technology

    Part No.: I1C1674EV

    Serial number: 000018E64C0018E4

    Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

    Format: IMM (67.6 x 15)

    Size: 4096 MB (2 ranks, 8 banks)

    Buffered module: No.

    Registered module: No.

    Module SLi Ready (EPP): No.

    Module XMP: No.

    Module XMP 2.0: No.

    Width: 64 - bit

    Ability of Error Correction (ECC): unspecified

    Prefetch buffer: 8 bits

    Manufacturing: Week 23 of 2012

    Temperature probe: no

    Heat spreader: Yes

    Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

    Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

    Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

    TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

    ------------------

    So, it's a 2 GB module and one 4 GB. Different manufacture.

    My question is:

    What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?

    Thanks in advance for any help.

    Kind regards.

    Hello

    You wrote:

    "What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »

    In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.

    Specifications of aspire V3 - 571 G-9686:

    Chipset: Mobile Intel HM77 Express.

    Processor: Intel Core i7-3632QM

    Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3

    You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.

  • Faults on Acer 15 inch Chromebook CB5-571-C1DZ

    According to this thread on The Forums of Google product, Amazon (once they receive their supply in return, it is out of stock until the middle of may, but they will allow me to use the defective until then) replace my Acer 15 inch Chromebook CB5-571-C1DZ , because:

    1. If you type on the keyboard and press the mouse pad at the same time, it makes the entire screen flicker black which can result in the blocking of the laptop upward, requiring a power of refreshment &.

    If anyone else has this problem, know that you are not alone.

    Hello world

    I got the word argue that Google is aware of this issue and is currently expected to have this Treaty in version 44 (we're currently on 42). I returned with a few questions more because I'm sure that if it comes to specific hardware or anything else, if I receive this information I will share.

    Here is the review Google source: https://chromium-review.googlesource.com/#/c/268824/

    Thank you
    Cory

  • Aspire laptop frezzes E1-571 and becomes unresponisve with battery in but works fine with power cord

    I have a laptop Aspire E1-571 who is having problems with the battery. When the battery is connected to the laptop will freeze and no longer respond. However with the battery and the power cord a/c is connected, it works very well. This laptop has been upgraded to windows 10 and can find no reason for this question that drivers are up to date. Only thing that I could turn on google was a possible problem with the power management software, but acer has no update for windows 10 I can find for this laptop.

    Unplug the power, remove the battery, press the power button / stop for a few seconds, install the battery, reconnect the power supply and turn on the laptop, see how it goes.

  • upgrade from v3 - 571 g screen

    Hello, new here.

    I have the Acer Aspire V3 - 571 G-73638G1TMakk, Q5WV1, model NX. M7DEX.006 with nvidia geforce m 730 (4 GB).

    Screen on this subject is B156XTN02.2 AUO, 3 x 2 points above, as well as cable LVDS (LED) DC02001FO10 40.

    Its screen HD 1366 * 768 and I want to upgrade to full HD 1920 * 1080.

    Question for a million dollars... anyone know if existing LVDS cable is capable of full HD (2 channels) or not, and if not, then that one is?

    Also maybe someone knows first-hand what FHD screen is 100% compatible with my V3 - 571G.

    I know upgrade is possible, but it is almost impossible to find the necessary information.

    There are two options I see:

    (1) buy 40-pin LVDS FHD screen and connect it to the current cables (if it's 2 channels) or buy 2 channels cable LVDS (which?). Its simplest option because there are a lot of screens of previously LVDS FHD.

    (2) buy 30 pins eDP FHD screen, like the FHD those here

    https://www.LaptopScreen.com/English/model/Acer/Aspire%20v3-571G%20SERIES/?set_currency=USD

    and a compatible cable, like this

    http://www.eBay.com/ITM/171751618880?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    Big problem is different from editing (editing side vs the face), dimensions seem to be ok, but how install/repair it? Glue? Maybe it has side holes too?

    Second big problem, the cable. It is 40 pins on the motherboard side (should be), but Ted on the side of the LCD. is my card mother Q5WV1 eDP on the side of the LCD supported at all?

    At least, maybe someone has FHD aspire v3 - 571 G and knows his cable series number and the screen?

    Please help, because I am limited with budget, updated in the service center is too expensive (I checked) and I really want to improve the resolution, because I use it a lot and foggy and sqare letters are a pain to read.

    Thanks in advance to anyone who tries.

    I think I have all the information I need, so I'll share the search for others.

    Basically, to upgrade your v3 - 571 g full HD, you need the screen and cable Laurent wrote, and cover the new hinges and back.

    • ACER screen LCD LED 15.6 "FHD NGL eDP (KL.15608.005), replacement for LG LP156WF4-SPB1
    • ACER COVER LCD AMT GRAY FHD (60.RZGN2.001)
    • ACER CABLE EDP FHD (50.RZGN2.002), or that... FHD Q5WV1 LCD video cable Dc02c004600
    • ACER LCD SUPPORT R & L FHD (33.RZGN2.001) COVER

    Media/hinges seems to be the same, except at the top they have extension for fixing. And the coverage is gray andprobably a holes for fixing in the lower part.

  • Aspire E5-571 52 GR touchpad not working not

    My touchpad of precision laptop (Aspire E15 E5-571 - 52GR) has stopped working it a few months ago. I'm managing with a wired mouse. I tried the touchpad on and off by Fn + F7, no chance of switching. Initially a click right stopped working while left click, drag, etc., always worked, now the touchpad is completely disabled.

    A week ago, I realized that I have completed my warranty of 1 year in December!

    Any help question touchpad is very appreciated.

    Concerning

    Radhika

    Ok. At this point, I don't think that your touchpad of accuracy problems are related to the material. So I would like your opinion on whether you think this microsoft link & video relates to your particular situation, because it usually seems to be Malay currents related to this new user interface.

    http://Windows.Microsoft.com/en-us/Windows-8/touchpad

    A report

    Jack E/NJ

Maybe you are looking for