E1000 plus PS3 NAT Type 3 Help is

Similar Questions

• I have nat type 3 on my ps3 help

  Hi im new to the Ant

  I have a ps3 and I got a wrt54g2 router with: 1.0.04)is firmware which has nat type 3 and I was wondering if someone can help me set up my router nat taype 2 like a vid or something please and thank you for your support

  Follow this procedure to configure your router. This procedure to set up the PS3. Follow the steps carefully. Reset the default router and configure it from scratch might help.

• NAT Type help

  Hello I have a router linksys wrt310n versoin 1.0 and im trying to get nat open for my ps3, I set up a static for her ip address and I've implemented portforward for the ports, I tried to put the ps3 in the DMZ and nothing works the only thing I've found to work is to reboot the router I get an open nat type , I'm getting frustrated with this router someone please help

  Weird... I'm sure thay, you know what you are doing and open ports for a device is not that hard, so I still stand by the advice that is for you to get a new router. Or if you want, you can find a good router (with or without wire) and use the Wrt310n as a switch/AP.

  The fact that it works for you after the reset of the router really makes me think that you encounter the same problem that I did.

• does anyone know how to fix NAT TYPE failed for the PS3?

  I tried to play modern warfare 3 online for the past few days, and this is the first time that I had this problem when I bought the ps3 I just signed up to the playstation network and put it in my drive of cod mw3, I didn't have to open all ports or whatever it is, I played for about a year and a few days ago I turned on my ps3 and tried to play and nothing happened so I checked my connection and everything was connected, Internet, ip, and sony all have works well but my nat type has been down for about a week now, I reset my modem several times, I have a Siemens Gigaset se567, I tried the connection cable and wireless and Sony, I opened the ports I had and DMZ on always I net type Failed. so if anyone can help me it would be greatly appreciated. Thank you

  We have a separate community for Playstation products. Please click here for assistance.

  If my post answered your question, please click "Accept as a Solution."

• NAT Type for PS3 (wrt610N) question

  I have the wrt610N cable Internet and Modern Warefare 2 play on the PS3. Since day 1, I had a Type 2 Nat type depending on the internet connection of the PS3 test.  Modern Warfare 2 includes a Nat Type indicator on the lobby screen and mine said always moderate.

  Well, after a little research, I forwarded my ports and hop, he says that my NAt type is open. Yesterday I accidentally unplugged the router and now my screen of the lobby still moderate.  My ports are always transmitted, so I have no idea of what is happening.  Any ideas?

  Someone suggested that I can just go into the router and configure it to open, but it doesn't sound right.  Also, I read some posts on here and noticed people mentioning something on the home network defender in the Management tab.  I have no option.  Someone knows why?

  Port 10070 - 10080 not required for MW2, however, it is necessary for the PS3... As far as the DNS is concerned, I provided you DNS on the router, you can either use router DNS, DNS ISP or the universal DNS 208.67.222.222 and 208.67.220.220... any of them.

• NETGEAR AC1900 R7000 several Xbox those open NAT Type

  Hi all

  What is the best solution for those multiple Xbox on the same network. I have two Xbox.

  My question - get an open NAT Type on both those of Xbox. Both systems have a NAT open but not for multiplayer games. More specifically, black ops 3. I have UPnP turned on, but my black ops 3 nat type is moderate. When you look at the list of UPnP, I see a port for Xbox Live service in the list as 3074, but black ops 3 requires the port UDP 3075. At the same time, 3075 UDP has been registered for one of my Xbox and now it is no longer the case. So, what I have to do is setup port forwarding and add only my IP address of the Xbox as a personalized service with the port UDP 3075 and it works. That's fine and all, but my IP address for my Xbox (both) will not change from time to time. I thought UPnP would take care of this for me.

  How should I handle this so that both those Xbox use the port UDP 3075 and I don't have to worry any change my IP? Or need to be updated for my router to Negear as Black Ops is no longer using port 3074 Xbox Live?

  I'm on the last update of the firmware as of today (November 9, 2015) of V1.0.4.30_1.1.67. Yet once, I thought active UPnP would solve my problems with Xbox runing both on the same network.

  Your ideas/suggestions are appreciated! Thank you for your time and help in advance!

  p.s. I want to summarize... I have a NAT open for two small Xbox (if I go to the Xbox a settings/network settings tab), but I'll get one Xbox, one with an open NAT and the other with a NAT moderate when you play multiplayer on black ops 3. Treyarch said they use is no longer the same port as Xbox Live, now they use port 3075.

  Hope this makes sense... Please let me know if you need more information or have any questions.

  m

  You can keep changing IP addresses using the address book. Log in to the R7000. Go in ADVANCED > Setup > LAN Setup. Inside will be the address reservation section. Add two entries to your Xbox.

• I keep hitting a high key combination that diminishes my type. Help!

  I keep hitting a high key combination that diminishes my type.  Help!

  Hi KerryKegney,

  CTRL + will increase the font size whild CTRL - decreases the font size. Use CTRL + to increase the size of the police and let us know if cela heps.

• How to change my NAT type to 'open' _

  I use a USB Connect modem to play games online. My NAT type was set to "open" for a while but now is set to "strict" and gives me only temporary access to xbox live, won't let me not join parties or let someone join my party.

  Hello

  Follow the steps in the article mentioned below to solve the problem.

  Error: Your NAT type is set to strict (or moderate)
  http://support.Microsoft.com/kb/979000/en-GB

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need HELP to change the NAT type to open on Linksys E2000.

  I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?

  Follow the below mentioned settings, then check.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box.

• E2000 + XBOX Live moderate NAT =... help please

  I know that this topic was beaten as a dead horse, but I still need help. I followed these instructions and double checked.

  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  4) go to the XBox network settings and IP address settings, select manual IP settings and assign the following operations on your Xbox
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  The Xbox has connected, but I always get a moderat NAT and I'm not sure why. The xbox is suggesting I open the UPnp... but just maybe it's a generic solution.

  Any suggestions?

  Thank you!

  You have a few options.

  1. use the bridge instead of router

  2. Requests Comcast to allow you to use a residential modem instead of the SMC.

  3. use the DMZ to set the router on the gateway firewall.

  4. my personal favorite, ask ComcastLarry to set the bridge mode bridge for you so that the E2000 works as the router. For this option, look at the 37th post

• Cisco 861 DHCP + public static IPs + NAT/DNAT. Help.

  Hello

  I used to use a server of self-made CentOS for intranet for my small office, but I have bouth a few days ago a router Cisco 861 to replace the linux machine.

  My needs:

  1. I have 2 public classes of IP from my ISP. 1 class is limitted 80mbit upload, the other to 30mbit upload. So I need some sort of DNAT to be able to know exactly what intranet computer uses internet great and including a single internet limitted.

  2. I need DHCP server with static IP addresses (a computer must always have the same IP address, etc)... I have my needs for this.

  3. also I need external access to certain servers on the inside (web, ftp, etc.)

  Parameters:

  (Dhcp) intranet: 10.11.12.x 255.255.255.0)

  1 public Internet: 89.45.204.118 255.255.255.248 (89.45.204.117 as gateway)

  Public Internet 2: some other class in the same IP (assume 89.45.204.58/24 for example)

  DNS: 89.45.200.1

  So far so good, everything seems simple and I can do this in 2 hours on a centos linux box (correct roads, active ip Routing and some rules for NAT/SNAT/DNAT iptables).

  But on this new router of Centos... Well, I am not yet able to ping the outside world, nor inside world I'm tired reading the forums, documentation... I want (at the beginning) to a simple scenario: vlan + dhcp, SEA4 with 1 public ip address and ACCESS to the real world. I was not able to reach even not that much.

  OK, first of all, here is a copy of the running configuration:

  Building configuration...

  Current configuration: 5826 bytes

  version 15.1

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname cisco861

  !

  boot-start-marker

  boot-end-marker

  !

  !

  enable secret 5 [out-of-context]

  activate the password [out-of-context]

  !

  No aaa new-model

  iomem 10 memory size

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-2459631067

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2459631067

  revocation checking no

  rsakeypair TP-self-signed-2459631067

  !

  !

  TP-self-signed-2459631067 crypto pki certificate chain

  certificate self-signed 01

  [deleted-of-context]

  quit smoking

  IP source-route

  !

  !

  DHCP excluded-address IP 10.11.12.1

  DHCP excluded-address IP 10.11.12.251 10.11.12.254

  !

  IP dhcp pool cisco861-iasi

  import all

  Network 10.11.12.0 255.255.255.0

  domain cisco861.iasi

  DNS-server 10.11.12.1 89.45.200.1

  router by default - 10.11.12.1

  -NetBIOS 10.11.12.2 name server 10.11.12.3

  !

  IP dhcp pool testPC

  the host 10.11.12.111 255.255.255.0

  0100.c030.1012.09 client identifier

  testpc-01 customer name

  !

  !

  IP cef

  IP domain name cisco861.iasi

  name of the IP-server 89.45.200.1

  !

  !

  license udi pid CISCO861-K9 sn [out-of-context]

  !

  !

  username admin secret of privilege 15 4 [removed-of-context]

  !

  !

  interface FastEthernet0

  no ip address

  !

  interface FastEthernet1

  no ip address

  !

  interface FastEthernet2

  no ip address

  !

  interface FastEthernet3

  no ip address

  !

  interface FastEthernet4

  external description $ ETH - LAN$

  IP 89.45.204.118 255.255.255.248

  NAT outside IP

  IP virtual-reassembly in

  full duplex

  automatic speed

  !

  interface Vlan1

  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW

  10.11.12.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  IP tcp adjust-mss 1452

  !

  IP forward-Protocol ND

  IP http server

  23 class IP http access

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  overload of IP nat inside source list 23 interface FastEthernet4

  IP route 0.0.0.0 0.0.0.0 89.45.204.117

  !

  access-list 23 permit 10.11.12.0 0.0.0.255

  Dialer-list 1 ip protocol allow

  SNMP-Server RO community cisco861.Iasi

  !

  Line con 0

  local connection

  line to 0

  line vty 0 4

  access-class 23 in

  privilege level 15

  password [out-of-context]

  local connection

  transport input telnet ssh

  !

  end

  (I couldn't find any CODE or a QUOTE as on other forums... so I tried to indent the config for you guys)

  In addition, here are a few troubleshooting commands I used, maybe they can help some of know you what is the problem

  cisco861 #show ip interface brief

  Interface IP-Address OK? Method status Prot

  Commissioner of official languages

  FastEthernet0 unassigned YES unset upward, upward

  FastEthernet1 unassigned YES unset down down

  FastEthernet2 unassigned YES unset down down

  FastEthernet3 unassigned YES unset down down

  FastEthernet4 89.45.204.118 YES manual up up

  NVI0 89.45.204.118 YES unset upward, upward

  Vlan1 10.11.12.1 YES manual up up

  cisco861 #show mac-address-table

  Port of destination address Destination address Type VLAN

  -------------------  ------------  ----  --------------------

  dynamic xxxx.xxxx.xxxx 1 FastEthernet0

  XXXX.xxxx.xxxx Self 1 Vlan1

  ODD: it has no mac address for the connected FastEthernet 4. How comes? I changed 3 cables. All cables are OK.

  cisco861 #show ip route

  Code: L - local, C - connected, S - static, mobile R - RIP, M-, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2

  i - IS - Su - summary IS, L1 - IS - IS level 1, L2 - IS level - 2

  -IS inter area, * - candidate failure, U - static route by user

  o - ODR, P - periodic downloaded route static, H - PNDH, l - LISP

  + - replicated road, % - next hop override

  Gateway of last resort is 89.45.204.117 to network 0.0.0.0

  S * 0.0.0.0/0 [1/0] via 89.45.204.117

  10.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks

  C 10.11.12.0/24 is directly connected, Vlan1

  L 10.11.12.1/32 is directly connected, Vlan1

  89.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks

  C 89.45.204.117/29 is directly connected, FastEthernet4

  L 89.45.204.118/32 is directly connected, FastEthernet4

  #show FastEthernet 4 router interfaces

  FastEthernet4 is up, line protocol is up

  Material is PQII_PRO_UEC, the address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)

  Description: external$ ETH - LAN$

  The Internet address is 89.45.204.118/29

  MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-duplex, 100 MB/s, 100BaseTX/FX

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry at 00:02:54, 00:00:00 exit, exit hang never

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  28 sachets of entrance, 3909 bytes

  Received 14 emissions (0 of IP multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Guard Dog 0

  entry packets 0 with condition of dribble detected

  output of 110 packages, 25366 bytes, 0 underruns

  0 output errors, 0 collisions, 3 interface resets

  unknown protocol 0 drops

  0 babbles, collision end 0, 0 deferred

  1 lost carrier, 0 no carrier

  output buffer, the output buffers 0 permuted 0 failures

  interfaces of router #show vlan 1

  Vlan1 is up, line protocol is up

  Material is EtherSVI, the address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)

  Description: $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW

  The Internet address is 10.11.12.1/24

  MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive not supported

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry of 00:00:06, output ever, blocking exit ever

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  packets of 512, 53381 bytes, 0 no buffer entry

  Received 185 broadcasts (0 of IP multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  exit 180 packages, 13248 bytes, 0 underruns

  output 0 error, 1 interface resets

  unknown protocol 0 drops

  output buffer, the output buffers 0 permuted 0 failures

  Also, I tried other combinations, as follows

  1. IP route static inter-vfr
  2. IP default-gateway 89.45.204.117 (ofc combined with no ip Routing). I can ping 8.8.8.8 in this scenario, but not other IP addresses. WTF?
  3. network default IP 89.45.204.117 (the bridge) - nothing
  4. 89.45.204.118 default IP network - bothing
  5. IP route 0.0.0.0 0.0.0.0 FastEthernet 4 (with or without 89.45.204.117, with or without permanent keyword)

  Please, have mercy and help me.

  P.S. I've also attached the configuration and troubleshooting files if it will be easier for you to follow this path.

  A big thank you and God bless you!

  Hello

  IP nat inside source static 10.11.12.33 89.45.204.120 (host - to - host)

  IP nat inside source static tcp 10.11.12.33 80 89.45.204.120 80 (port translation host-to - host)

  RES

  Paul

  Please don't forget to rate this post if it has been helpful.

• Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

  I have a HP Photosmart Plus B210a printer code

  My problem is the following: -.

  The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

  I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

  Can anyone help me please with a solution.

  HI VTHapa,

  I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

  Now I don't know how to remove my ad?

  Scooter

• How to get a NAT type open with a linksys E2000 on PS #.

  I called customer service and they were completely clueless, told me I had to pay for support to fix it. I have a Linksys E2000 and I can not open nat for my PS3, tried DMZ, and settings of the XBox, but that obviously didn't work. If anyone has any ideas until I return this router $100?

  OK, I finally got it to work, here's what I did.

  On the router:

  1. I booked an IP address for my X 360.
  2 - passed my X 360 ports:
  TCP 80
  UDP 88
  53, 3074
  3 disabled uPnP

  Didn't even need to reset my router or something else. I hope this works for you guys.

• In the final the re-install on Officejet 6500 a Plus - USB connection cable fails HELP

  "Cable USB make sure the printer is on and remove any material from the port USB at the back of the printer" when this step is complete, nothing DON'T is PASSES only option return no 'next' - button nothing... That does the trick in the previous steps. It happened once before and had to have a tech their end HP deal now, my warranty has expired ARG of ideas?

  What did it:

  the cable is removed from the computer/printer - reconnected.

  turn off the power to the printer - lit

  Stop computer - restarted.

  successful re - install software

  any ideas? Thank you

  Hi nCCw,.

  Thanks for the reply.  According to the information provided, it seems that the USB port on the printer is faulty.  It is possible that both cables are defective, but it is unlikely.  According to the age of the model, the unit is probably out of warranty.  You can check the warranty status .  If one of the following connection options are not feasible, a replacement unit will be necessary. If the unit is out of warranty it is not covered, and the unit will need to be upgraded. Support information phone HP can be found here.

  Possible connection options:

  1. infrastructure network with router (this will not work with the map broadband) - wired with Ethernet connection or wireless radio

  2. direct network Adhoc-I do not recommend this, it will provide the feature with the connected computer, but other only single connection while the printer is connected (no internet access during this time)

  Try this to see if we can get the USB port to respond (if the port it completely dead it will not):

  1. check the port, if it is loose, push firmly in place

  2. clean, use a lint cloth and gently wipe the contacts on the inside

  Note: If the unit is out of warranty, I recommend you to contact the helpline.  Often updates are offered at discounted rates for a guaranteed customers value.  If you choose to upgrade, be sure to ask about care packs.  These may also be available at a discount for the purchase of upgrade.

  Hope this helps, let me know if you need additional assistance.

  Kind regards

• the sites that I opened your browser is een older type? Help

  Web sites report that my firefox is a previous version and does not support this site.

  Groet-Ukuboo

  You should try a few things:

  Sites Internet says that Firefox is obsolete or incompatible, even if it's the latest version

  Also, on an unrelated note, your graphics drivers are VERY outdated and you need to update to improve the stability and performance. Update your graphics drivers to use hardware acceleration and WebGL