E1550 sees no USB storage drive

Similar Questions

• Satellite Z830 - backup on USB storage drive recovery

  I need to make the backup of this Z830 recovery system.
  But unfortunately, the system does not recognize the usb storage drive to make this recovery.

  Obviously, the storage usb drive have plenty of space and OK to work on this Z830.

  Any suggestions?
  Thanks in advance

  Hello

  The recovery image can be created on a CD/DVD disc or USB memory stick. As far as I know you cannot use a common USB HDD for recovery.

• Disable the peripheral only USB storage drive?

  How can I disable only USB key in windows XP Professional without disable keyboard and mouse because these are fixed with USB ports.
  Operating system: Windows XP Profesional

  Hi adeelahmed,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How can I prevent users to connect to a USB storage device?

  http://support.Microsoft.com/kb/823732

• Driver for usb storage device

  Hi, I have a packard bell No. PEW96 pc and I use a windows 7 Home premium. The problem is that the pc is not a driver for the usb storage device. How I can install it and how I can find it? and the name is? I hope you reply and help me to resolv this.thank you

  Moved from feedback

  Original title: usb storage driver

  Look in their Download Center.

  http://www.PackardBell.co.UK/PB/en/GB/content/download

  Good luck.

• Unrecognized USB external drives. Device Manager sees them. Explore and Disk Manager can't.

  It is a Mobo of P5ND Homebuild under XP SP3.

  External hard drives have been installed and running. However, it was necessary to reformat the operating system. After that, some of the XHDDs have been recognized, but at this point none of them are recognized.
  Device Manager sees 'Generic peripheral storage device USB' for readers, or in a case simply the letters of WD.
  The devices are not detected on my computer (Windows Explorer) or disk management.
  I swapped the cords and cables. I checked that hubs work, and I would stress that the hubs have external, and their own power of stand-alone XHDDs feeding.
  I suspect that readers have damaged file structures, perhaps they have been disconnected because of a loss of power, or my incompetence...
  In any case, they are there in Device Manager, but not in disk management or in computer.
  They do not appear on other computers either.
  The details of the driver for the XHDDs are the same as the internal hard drives. The XHDDs are all PATA. The IHDDs are all SATA.
  There is a noise clear when they are attached and detached from the computer. The computer recognizes that something is happening.
  My level is probably above beginner, but not to the expert, as I build my own units.
  The XHDDs are different manufacturing. They contain data of the value and I do not want to format.

  Have you tried plugged directly into the PC rather than through the hubs?

• gives USB mass storage driver '!' mark

  After working continuously for a long time my system becomes unable to recognize the USB. This mass storage driver USB of time in the driver manager gives '!' sign. The problem disappears once I restart the computer. My laptop model is Pavilion g6 & its only 4 moths old.

  Please help me out of this. I need help badly...

  Aurélie Koleh

  Hi John,

  Well, I have a number of things for you to try. The first is a Microsoft Fixit for hardware not detected or does not. The second is a paper on troubleshooting USB connections go through it and let me know how it goes.

  Thank you

• Taking USB Flash drive supported Mass Storage Class Ver 1.1

  Hello

  I would like to know if the 128GB sandisk USB MSC Version 1.1 compatible player USB flash?

  If supported, is what model?

  Thank you very much for your advice.

  Kind regards

  Hong

     Salvation Hong,

  A good friend, Yes, I said in my post # 2 above.

  USB 1.1, 2.0, 3.0 and 3.1 versions, are compatible with each other.

  All of the submissions from SanDisk (Flash USB drives or USB key), are compatible with the USB MSC Protocol.

  -Online all USB Flash drives, is compatible with USB 1.1.

  See and choose here: http://www.sandisk.com/products/usb/drives/

  Enjoy!

  Sincerely, Alfred.                                                                (Google translation)

• Removal of a USB storage device translates to a non-existent drive letter that appears.

  If I plug in a USB flash drive or USB hard drive classic as a WD passport, in one of the USB ports on a G71150US with Win 7 home premium, then remove it, a new hard drive symbol and the letter displayed in Explorer 'computer '. This symbol indicates that there are 0 bytes in use and 0 bytes used or free.  This happens even if I followed the correct procedure and use the process of "remove".

  What is the problem, a BIOS problem?  A Win 7 problem?

  The problem seems to be related to "Version of Office 2010 Starter and click to Run" part of this software that is bundled with most new computers. I uninstalled the files for Office 2010, click here to run Office 2010 and the uninstalled starter 'Office 2010' version and the ghost car is no longer.

• How to boot from simulated USB (flash drive) mass storage device?

  I do some development work on the anaconda, the Installer used by Red Hat Enterprise Linux and reconstructions based off of him.  I'm testing support of USB flash drive facilities and would rather test my changes using image files from a USB drive physical - a bit like editing an .iso image to a CD instead of using a physical CD of closure.

  I found a reference to the Framework of Linux-USB Gadget API, which looked exactly like what I was looking for.  After the reconstruction of the almond, I was able to run:

  • modprobe dummy_hcd
  • modprobe g_file_storage file = CentOS - 6.2 - i386 - netinstall.iso

  After that, the office immediately get the image as if I had actually plugged a USB stick with the same content.

  I am also able to connect this virtual USB device to a virtual machine, but when I start the virtual machine, it has no option to boot from the virtual USB device.

  Any ideas?

  VMware Workstation does not directly support boot from USB but you can use a third-party utility called Plop Boot Manager to boot a bootable USB disk and you may be.

• How can Kenichi Watanabe, I put my music on iTunes on an external USB Flash drive please?

  I have a new USB Flash Drive 32 DB/GB and I want to put all my music in my iTunes top.  I saw instructions on apple, but they do not make sense.  Help, please.  Thank you.

  Hello again...  It depends on the reason for this.  You then use the USB flash drive as internal storage location for its iTunes Media , because iTunes folder that you run lack of space on the disk?  Or maybe what you are doing to use the USB FlashDrive with a car audio system?

  In the previous topic, I think you said that you use a Mac (not a Windows PC) to run iTunes, is that correct?

• USB Flash Drive 16 GB Write Protected v210w

  Hello!

  After a week of use, my new USB Flash Drive 16 GB v210w key appears as write protected.

  Cannot add a new file, delete the old file, same format any USB Flash drive.

  I have tried various procedures described on the forums, as

  • My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePoliciesWriteProtect > data of the value set to 0
  • \devise\harddisk1\dr2

  and the normal formatting (properties > Format) and the low level of implementation in the shape tools, as

  • http://www.Softpedia.com/progDownload/HDD-low-level-format-tool-download-37794.html
  • http://www.Apacer.com/en/support/downloads/Repair_v2.9.1.1.zip
  • http://www.transcendusa.com/products/online_recovery.asp
  • HP USB disk storage format SP27608 tool - 2.1.8.exe

  but in vain.
  
  That's happened? How to resume normally using my USB Flash drive?

  I use a mini 311c on XP SP3.

  Thank you for your help and best regards.

  
  -rei_vilo

  Hello!

  Get help from hp support.

  The technician suggested I make a test disc with http://panasonic.jp/support/global/cs/sd/download/sd_formatter.htmlformat.

  He failed and prompted the 'Protected disc' message, so my USB Flash drive was considered dead.

  I went back to my dealer and proceeded to an Exchange. The dealer was not surprised: according to him, large USB Flash Drives seems to be subject to this kind of malfunction.

  I hope to be luckier with the new!

• Notification of 'removed USB storage device' persistent.

  Hello

  My motorcycle G shows after persistent notification.

  'USB storage deleted '.

  Removed USB storage. Insert new media. "

  This notification is displayed after removing the Flash drive by removing it from settings-> storage and pulling the OTG with the drive cable. The notification seems to be stubborn and it can not be erased it unless the device is reset. It isn't harmful, but because of my OCD (mandatory disorder that) for the verification of notifications is causing irritation.

  I notice that only KitKat 4.4.2 and not JellyBean 4.3.

  Any ideas to clear the notification? or is this a bug?

  Thank you

  Ngom

  Update:

  I uploaded a screenshot and added a correction in question (the correction is in bold).

  Hey all,.

  This bug has been reported and a fix is under way.

  See you soon,.

  Nicole

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked

• Sony MicroVault Click USB Flash Drive 2GB USM2GL

  can someone tell me what to do - when I plug in any device on my USB ports that nothing happens. I tried to connect my Kindle, flash drives and printers with no luck. any suggestions?

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  Check whether the USB port even gets detected on another computer or check if different USB gets detected on this computer.

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
  
  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers. Restarting the computer should automatically install the drivers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  
  Method 3: check if the device is getting detected in Device Manager.
  Reference: http://windows.microsoft.com/en-US/windows7/Open-Device-Manager

  
  Method 4: check if you can access the device via the Disk Manager.

  a. Click Start, type diskmgmt.msc and press ENTER to open disk management.

• HP pavilion 15-ns204es: windows 7 SATA storage driver hp pavilion 15-n204

  
  

  Hello:

  See if the following works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24293

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts, and hopefully, will install W7.