E2000 + XBOX Live moderate NAT =... help please

I know that this topic was beaten as a dead horse, but I still need help. I followed these instructions and double checked.

On the Configuration tab change the size of the MTU to 1365, then click on save settings...
Click the 'Administration' tab and disable the UPnP option and click on save settings...
Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
(1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
(2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
(3) click on the status tab, and then note the DNS1 and DNS2 addresses...
4) go to the XBox network settings and IP address settings, select manual IP settings and assign the following operations on your Xbox
IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
(5) also assign addresses DNS on Xbox
Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
(6) turn off your modem, router and Xbox... Wait a minute...
(7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

The Xbox has connected, but I always get a moderat NAT and I'm not sure why. The xbox is suggesting I open the UPnp... but just maybe it's a generic solution.

Any suggestions?

Thank you!

You have a few options.

1. use the bridge instead of router

2. Requests Comcast to allow you to use a residential modem instead of the SMC.

3. use the DMZ to set the router on the gateway firewall.

4. my personal favorite, ask ComcastLarry to set the bridge mode bridge for you so that the E2000 works as the router. For this option, look at the 37th post

Tags: Linksys Routers

Similar Questions

  • 3PG videos are mirrored in Windows Live Movie Maker - help, please! : () o

    Hello everyone,

    I just downloaded a bunch of .3pg videos from my phone and trying to make a beautiful film for Christmas with them using Windows Live Movie Maker. WLMM matter videos and displays thumbnail video exactly the way it's supposed to, but in the region which play my video, it is shown upside down-> I can rotate video 180 degrees-> then I realized it was not only the video upside down at first, but it is completely reversed / a mirror-image of the original video (IE there's a zit on the left side of your face in real life and) the original and now with the one in WLMM importetd video the zit is now on the right).

    Of course, there are no options for this problem, so I don't know how prevent/reverse this. Y at - it a codec, an update, anything that will allow me to use the files WLMM and 3pg without going nuts?

    Thank you very much-, I've been Googling for awhile and couldn't find anything.

    Hello everyone,

    I just downloaded a bunch of .3pg videos from my phone and trying to make a beautiful film for Christmas with them using Windows Live Movie Maker. WLMM matter videos and displays thumbnail video exactly the way it's supposed to, but in the region which play my video, it is shown upside down-> I can rotate video 180 degrees-> then I realized it was not only the video upside down at first, but it is completely reversed / a mirror-image of the original video (IE there's a zit on the left side of your face in real life and) the original and now with the one in WLMM importetd video the zit is now on the right).

    Of course, there are no options for this problem, so I don't know how prevent/reverse this. Y at - it a codec, an update, anything that will allow me to use the files WLMM and 3pg without going nuts?

    Thank you very much-, I've been Googling for awhile and couldn't find anything.

    ===================================
    I suspect that your best option would be to convert the
    3GP files in a more compatible format like WMV before
    import into Movie Maker.

    There are many programs that can do conversions...
    The following freeware is an example...:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.pcfreetime.com/
    (the file you want to download is: > FFSetup260.zip
    (FWIW... installation..., you might want to
    Uncheck the box 'all' boxes on the last screen)

    First, you will need to decompress the file or just open the
    Drag the FFSetup260.zip out of the folder
    and drop it on your desktop. To install left click.

    First... after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I can't select a single path after using the live paint bucket; Help please?

    Before using the live paint bucket, I was able to select the individual paths both to edit. Now when I click on one road, he selects each unique to the image path. Is there a way out of this?

    That's what I'm going to talk: (I only wanted to select the star, but the entire image has been selected).

    Screen Shot 2014-05-12 at 10.46.54 AM.png

    You should always be able to select the individual paths with the direct selection or group selection tools. or open the layers palette and hunt for him. or double click with the black pointer to break into the group.

  • E1000 2.1 and the xbox live NAT problem (I read all the others)

    So like everyone, im having troublewith xbox live and NAT, but I feel my situation of dns is unique, so my solution is perhaps just as well. Help, please

    Modem-> Router (e1000)-> port 1 (wired): xbox, wireless: mac computer

    Configuration: Auto DHCP

    MTU: tried 1365 and 1452, currently on 1452

    UPnP: off

    NAT: on

    Port Range Forwarding - (tried reccomendations cisco and xbox, tried the verses of individual ports this range, currently at)

    (looked in the outbreak, but as I have 2 devices, if I let a range of open ports, I want that it does match the xbox)

    Application: xbox

    Start port: 53

    End port: 3074

    Protocol: the two

    IP address: 192.168.1.20

    Xbox is set to:

    IP: 192.168.1.20

    Subnet mask: 255.255.255.0

    Gateway: 192.168.1.1

    DNS: automatic

    reading only 1 dns (see notes)

    Notes:

    router port range is 100-149, so DHCP should not be a problem (I guess) if ip xbox is put out of reach ([192.168.1.20] being 20)

    In my status tab in the router, it gives me only a dns. When I look at online modem, it gives 2 different DNS.

    Each time, I have everything works a turn at a time, the computer always connects, Xbox Live still connects, but he still has the problem of nat.

    I don't think it's a matter of double nat, bc when I look at the stats of my modem there is nowhere to configure ports (seems to be the modem only 1 Ethernet only)

    Also, I noticed that the mtu of my modem is 1500 (I changed the mtu on the router, but not the mtu of my modem [it only allows me to change the mtu of my modem])

    Help, please. I've been dealing with it and try different combinations of ports and options for 4-5 hours now. I'm starting to crack: S :).

    Well, I found my own solution.  I looked at all options as what could be easier for the components to deal with.  Here's what worked:

    Computer:

    Configuration: Auto DHCP

    MTU: 1452

    UPnP: on

    NAT: on

    DMZ:

    Source: 192.168.1.100 to 100

    Destination: 192.168.1.1

    Xbox:

    I could leave it on auto dhcp mac address book bc but it looks like this:

    IP:192.168.1.100

    Subnet mask: 255.255.255.0

    Gateway: 192.168.1.1

    DNS: automatic

    Combined with a DHCP reservation [via the mac address (for the safety of the DMZ)] all of it worked.  With a DMZ, I didn't have to worry about which ports where correct.  It was just messy because I was 2 devices of connection and could not choose a single static ip address. So, the example ip ending (20) was not default range of the router of 50 numbers. Pay attention to your range of ip addresses in the router settings.

    * Make sure that your DMZ is on only a single or a partition of ip addresses, and you have other DHCP reservations for these ip addresses * you can find the mac address for xbox by accessing the network > configure network > additional settings > click Advanced settings, and not choose a 'different address', you should see a below *.

  • I need to configure UPnP to get a better connection for Xbox live

    I need to implement UPnP to get a better connection to xbox live. could someone help or tell me how to activate it?

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

    I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

    Help me!

    If you don't remember your security question, you're probably out of luck. Now, you know the importance of keeping the records. In all cases,.

    Windows Live ID is supported in this forum
    http://answers.Microsoft.com/en-us/windowslive/Forum/LiveID

  • Stuck in the loop now accepting the new terms of use on Xbox Live Please HELP!

    I am stuck in a loop of redirection while trying to accept the new terms of use for XBox Live. I have a child account parental consent is required. I KNOW im putting the good info because when I put wrong information, it tells me that the password is incorrect. When I put the correct information and click identify you, let's return to the page where I have to click on I accept. Is this a problem with Xbox.com? Is this a problem with my account? Can someone please answer this question? Ive been very angry, because it has been updated. Please, I just want to play online and talk to my friends. Any help would be highly appreciated. Thank you!

    Try Xbox support:
    http://support.Xbox.com/en-us/

  • NAT on Xbox Live with WRT54GS problem

    I have a WRT54GS v2 and I tried to solve the NAT problem I had whenever I have test Xbox Live.  I felt like I've done the research so much on this and I can not get it out of a moderate or strict NAT.  I did the port of release for the 88 and 3074-port, feature disabled the "block internet anonymous requests" and updated to the latest firmware and I have nothing will open the NAT.  This is the first time that I ever had a NAT problem with a Linksys router hooked up to my Xbox 360 and I want to know once and for all, what steps I must take to open the NAT.  Can someone please... Please... Please give me some instructions step by step on how to open the NAT?

    First upgrade the Firmware of the router... Download the Firmware from here , after downloading the firmware, you must update the firmware...

    Follow these steps to upgrade the firmware of the device: -.
    Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
    Let the empty user name & password use admin lowercase...
    Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
    Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

    Press and hold the reset for 30 seconds button.
    Then, unplug the Dungeon to be able to hold down the reset button for another Seconds.Plug 30 the power back in and hold the reset button for 30 Seconds.Release the reset button. Now, you will need to reconfigure your router...

    If your ISP is cable follow this

    If your ISP is DSL follow this

    For X - Box: click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

    (1) on the first line in the box, type Application in the Xbox, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

    (2) on the second line in the box of Application in Xbox1, in the start box, type type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

    (3) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

    4) click on Setup and change the size of the MTU to 1452 and click on save settings...

    (5) now assign the IP given on your Xbox
    Go to the network settings on your X - Box, then go to the settings of IP address and select manual ip/static ip and enter in this

    IP address:-192.168.1.20 default :-255.255.255.0 gateway/gateway/router subnet mask:-192.168.1.1... Save settings...

    (6) also assign addresses dns on Xbox
    Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1... Save settings...

    (7) turn off your modem, router and Xbox... Wait a minute...

    (8) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn the Xbox and... test it connects...

  • I don't know my email account to get my Xbox fixed my gamer tag is EVILSCOTSMAN201 I phone xbox live, they can't help me because they can't get through security my

    No I can't sign on my account that I don't remember my email that I created for my player tag profile and it says corrupted profile that my gamer tag is EVILSCOTSMAN201 I phone xbox live, but they couldn't help that they could not get through security because I do not remember the help by email please

    Hello

    -What version of Windows you are using on the computer?

    The question you posted would be better suited to the Xbox support. View the query in the Xbox forums for assistance. Please see the link below.

    http://support.Xbox.com/en-us/contact-us

    It will be useful.

  • Xbox live help I need to control my back account

    really need help a family friend set up my email under his account and Noah my xbox live is ordered parental, not a problem with this otherwise that no longer us talk to him and live 1000 miles on bad terms, I want control of my account back.

    Hello

    For us to better help can you with your concern, you please give us the e-mail affected account?

    Also, can you please give us the exact error message that you receive by logging into your account?

    Thank you!

  • Can someone please reset my password XBOX LIVE please?

    I got a new xbox today and I have forgetton my live password xbox, could someone please reset this?

    Hello

    See the links below and check if that helps.
    Xbox LIVE connection issues
     
    For reference:
    Error: E-mail address or the password is not valid (80151103, 000-8015, 8015d02e)
     
     
    If the above links don't resolve that problem check the following link for the XBOX forums for further assistance:
     
    Hope this information helps.
  • Xbox live connection? ... help! .

    Do I have to connect my xbox to xbox live son without running a cable? Will be my windows vista will load a signal him or do I have some extra hardwear? I have an att on ethernet modem. Please explain in terms a 10... No... 9 year old can understand I'm really naïve on this stuff and its suffering anniversary gift... Thank you.

    Hi spookeytooth,

    See the link below for more information on the installation of the Xbox

    http://support.Xbox.com/support/en/us/NXE/xboxlive/getconnected/hcxl/getstarted.aspx

    For more information, please contact Xbox support team.

    http://support.Xbox.com/support/en/us/NXE/xboxlive/default.aspx

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Need help for recovery from msn and Xbox Live, think have been hacked

    I'm having a terrible time trying to recover my password, my game with Xbox Live, the period of my account, I asked for help on the phone several times Urgghhh! . I have a gold Xbox Live subscription and have not been able to PLAY!. 3 week or two, I created a new account so that I could try to change the information, so far failed to get anywhere, I think that my account has been hacked and my information stolen, please help!  Here are the two
    1 tries to recover - * address email is removed from the privacy... * A new created * address email is removed from private life * thanks for your help...

    You can try to consult the following link:

    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    And he steps.

  • Linksys E3000 NAT open Xbox Live settings

    Hi all

    I recently upgraded my the WRT160n V3 to the E3000 router. I had the port to the front of my old 160n to get my game Xbox Live NAT settings to OPEN.  When I switched on the router for the new E3000, my Xbox Live settings are returned to the Medium (medium). I assumed that this would have happened since this is a new installation/router.

    Can someone help me configure my E3000 and Xbox Live so I can have my open NAT settings?  I only need to configure the Xbox 1. Any help is greatly appreciated. Thank you!!!

    The previous is large enough and generally useless for the configuration of the E3000 to facilitate capacity NAT open xbox live connections. 1 make sure you have a static IP assignment for the xbox an assignment of dhcp for the mac address of the xbox in creating or statically assigning an ip address to the xbox outside the dhcp scope, you set but on the same network / subnet of course. then go to the tab under applications and games and the prior port 3074, single port forwarding, both internal and external, to the IP address of your xbox. Name the rule openNAT or something that you will recognize. put a cheeck in the box to enable the rule and click on save settings to activate. Your xbox should now work without complaint about the need for open NAT xbox live test and gameplay should work just fine.

  • WRT160Nv2 Xbox Live Nat Strict and need to open NAT.

    So I have a WRT160Nv2 and I'm trying to get my nat to become unstrict for xbox live. I tried port forwarding which did not work. I tried this site http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=122065 and who doesn't (I don't have an xbox 360 btw). Nothing has worked for me and whenever I mess with something that it screws to the top of the internet, so I put up the previous default values. I know how to access my router I just need to know what to enable, disable, or add to the router. Any help would be great. Thank you very much.

    Uncheck all options trigger Port and try the Port Range Forwarding...

    Port Range Forwarding-

    Application: xbox

    Start port: 53

    End port: 3074

    Protocol: the two

    IP address: 192.168.1.20.

    Check the enable box and save the settings.

    On the Security tab, leave the block anonymous requests disabled and change the MTU in 1452 under the Configuration tab.

    Click the status tab, and take note of DNS1 and DNS2 address...

    Goto the network settings on XBox and IP address settings and select manual IP settings and assign the following operations on your Xbox: P address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

    Also assign addresses DNS on Xbox
    Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

    Turn off your modem, router and Xbox... Wait a minute...

    Connect the power supply to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

Maybe you are looking for

  • LabVIEW 7.1 executable on win7 64-bit

    Hello world I am currently working on a project using LabView and a PIC 18F2550. I am not the initiator of the project, I simply to continue the work already done. I had a problem, when I connect my camera using the PHOTO on my new 64 bit PC, it seem

  • How to force 3G

    Is it possible to force the bike x 3 g only? I have a situation where I can't get a signal of 4g or is quite poor because any use. That's why I was wondering if there is a way to do it.

  • How to load the operating system of split hard drive D of Aspire5315?

    OS in my laptop does not work correctly. Standard recovery system does not work - no food no points. How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  • How and where can I download and run, lack tasklist.exe?

    Try to find what causes my CPU to have high CPU utilization. Someone said, I could check the CPU high usage by going to RUN and type cmd, enter, and then type tasklist/SVC. but I get an error saying, essentially, that there is no task list. So, how c

  • I can't read the product key on the bottom of the laptop as the sticker is dissipated.

    product key for help I bought a mobile phone 2nd hand via personal sales.  The laptop came with Windows Vista home premium installed.  They had erased the hard drive before selling that I expected.  After 3 weeks, I started to have a prompt for asset