E2500

Similar Questions

• G60 - 228CA: unable to connect to the Linksys E2500 router with laptop G60

  Hello

  I hope someone can help because I've been through the forums and I will have no chance to solve my problem.  I bought a new router (Linksys E2500) and my laptop (G60 - 228 CA) HP can detect the router but just failed to connect to the internet.

  I tried to diagnose all the problems which have been proposed, but that did not help.  I restarted the router, nothing helps.  I tried to download and install a new driver to replace the old (Atheros AR5007 802. 11 b / g WiFi Adapter) but still had no luck.

  Really not sure where go from here so looking for help solve this problem.

  Thank you

  Hello:

  Verify that the driver you have installed is actually that of 2011.

  If not, go to the device, right click on the atheros wireless card, Manager select uninstall and if there is a box to uninstall driver for check, check.

  Reboot and try the driver I posted again.

  If the date and the driver version is what is indicated on the driver file, then unfortunately, I don't have any other suggestions for you to try.

• E2500 continues to change the IP address of hosting my DVR security cameras

  Recently trashed a UPS serving the E2500, brief now any power surge or glitch causes the router to assign a new IP to a connected ethernet security DVR.  Is it possible to assign the DVR a permanent IP address for other computers/devices on the local network must not be continuously updated to access the DVR?

  I don't have the same gui as you version but I think that the dhcp reservation is under status, LAN, then feservations dhcp.  If you put it there it should get the same ip every time the router restarts unless you make a zero factory which destroys all configs. If it does not come back, but it should solve your problem.

• How can I choose the band 5G when connecting on a Linksys N600 E2500

  I just bought a Linksys N600 E2500 and I see that it is dual band, so my question is: is it possible that I can connect my macbook pro on the band 5G? Looking at my settings wireless for my mac, I see that it is plugged into the 2G. However, I could connect my smart TV on 5G. My previous wireless router I had gave me this options to connect to a 2G or 5G.

  Any help would be appreciated.

  I have an early 2013 Mac book Pro OS x 10.9.4. Thank you!

  The MBP can see the SSID of 5G at all? Disable the wireless on the MBP and then turn it back on and let rescan for SSID names.

  Remove all wireless profiles that have been used previously under preferences/Networking/Wireless.

  Be sue that the different SSID on every radio on the router. It is not recommended to use the same SSID.

  Try single N, WPA2 only, automatic and manual of 48 channels, or 149 channel width on the router.

• E2500 Cameras IP remote works only outside

  I install my E2500 and D-Link Wireless ip cameras to see them outside. I have install cameras to have static IPS 192.168.1.137 and 192.168.1.138 and to transmit these IPs to 802 and 804 ports respectively. While I am on my home network I can hit my routers external IP address 20 x X9.1xx.2 X: 802 and 20 x X9.1xx.2 X: 804 and see the live stream of the cameras. Outside of my network can't connect to these addresses and see my live stream.

  Here are the screenshots of what might be relevant, let me know if there is anything else, you will see that it would help.

  http://imgur.com/a/qsZvh

  Also, I was on a Linksys WRT54GL before with the same parameters (and same modem), and I was able to access the cameras on external networks very well.

  Then I realized what the problem was. When I configure a static IP address for my camera, in the settings of the device there is an area of default gateway I left empty. Plugging 192.168.1.1 into said box enabled him to be seen from the outside. Sorry for the confusion, I hope this can help someone in the future.

• Using WRT54G as the second wireless with E2500

  Have read the threads on this, I want to make sure I have this correct.

  Currently I use the E2500 as my main router at my house (top).  I replaced my WRT54G with the E2500 to my DSL connection throughout the House.

  I run an ethernet as a hard link at the bottom of my smart TV cable.

  I now add another device (Channel Master DVR +) that it will also take an internet connection.

  I need two connections from an ethernet cable (already run down).  After reading a bit, looks like I can use my old WRT54G as a secondary router/switch down.  (Sorry if I'm not using the correct terms).

  In order to get my two connections (Smart TV and DVR +) I need at least a separator, or something?  However... "Why not extend my lower wireless for a stronger wireless connection down?" was my way of thinking.

  How can I configure my E2500 to recognize the WRT54G - run two difficult connections to my TV and DVR + and also extend a stronger signal wireless downstairs for my daughters iPod Touch?

  Thanks - Glen

  Who did the trick! You Rock! Thank you so much cub for your help and quick of Reid. I may be back later this week when my DVR + gets here but hope not. Thanks again!

• E2500 v2 in Bridge mode loses the ability to manage the device.

  All E2500 v1 and v2 are configured with Firmware Version: 1.0.07

  I can handle all the v1, but I can not mange to v2. What Miss me?

  Is this a known bug? Is there a work around or I would stay 4 x E2500 that I just bought?

  All are running farm ware

  Internet - Cable modem - E4200
  |
  |
  |
  Cisco switch
  |  |  |
  |  |  |
  |  | Port WAN E2500 v2 (bridge mode) 192.168.1.33/24
  |  |
  | Port WAN E2500 v1 (bridge mode) 192.168.1.32/24
  |
  Port WAN E2500 v1 (bridge mode) 192.168.1.31/24

  Hello! Try to reflash the E2500 v2 firmware if it's the only one with a problem. Please refer to this link http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=e9c2361ee7974d75913e61386a712188_4030.xml&pid=80&r... After the reflash, do a hard reset on the router. Do it right, please press and hold the reset button for 30 seconds while the unit is turned on. Release the button and unplug the router. Reconfigure the settings after that.

• E2500 Internet Configuration

  Nice day

  I can't properly configure this router.

  Let me explain the current configuration of the network in our office.

  We have a FritzBox which provides internet access and is directly connected to our file server, there is a connection that is isolated between the FritzBox and machine server with an IP 192.168.0.5

  The server provides a gateway with an IP address of 10.7.0.1.

  There is no DHCP Server feature, the machines that connect need a address static IP of 10.7.0.x and the address of the gateway/DNS set to the IP of the server

  I have the E2500 configured as such: 10.7.0.2 IP router

  Gateway 10.7.0.1

  DNS 10.7.0.1

  (Bridge at the time of writing mode)

  My big question is, is it possible to configure the router to act as a DHCP server to WLAN/LAN using the server as a gateway/DNS?

  TL:Dr: want new clients connecting to the E2500 to automatically receive the IP from 10.7.0.3 with gateway and DNS being 10.7.0.1

  

  And as far as I know, configure the router Bridge Mode turns off the DHCP feature on it and because the server doesn't have DHCP capability, the router will work for its own only and will not pass on the IP addresses to the devices that will be connected to him. Yes, you can enable the DHCP on the primary server and exit the bridge on the router. The router will of course get the connection to the primary server and there are no conflict at all in the Setup program.

• E2500 router communicates only with HP printer cable.

  I have a HP color LaserJet 2605dn printer and router e2500. I decided to run an Ethernet cable from the router to the printer instead of via the USB port of the laptop that works fine for a couple of years.

  Is the green light on the router would be flashing quick or light yellow on the printer. Guess there is a communication problem. After some reading material at random on Web sites and messages, I manually changed the IP address of the printer: 192.168.1.110 (that is outside the range of the DHCP users (6) quantity, which starts at 192.168.1.100)

  Leave the configuration window Panel > devices Printers & I added a new "Standard TCP/IP Port" to match the one I put manually (192.168.1.110).

  I varied results when I ping this new IP address while that the yellow light on the Ethernet port on the printer flashes quickly. Sometimes I will have 4 packets that have been sent in the ping also received, sometimes none are received, sometimes 1 and sometimes 2 packets are received. For example, ping results are contradictory and I don't know why that should be.

  I guess that none of my configurations 'Basic Wireless Settings' and "Wireless Security" have an impact here. After all, I'm trying only to communicate with my printer wirelessly via my laptop to the printer via a network cable. Also, I'm not a very technical person. I managed to get this far, but I'm at a loss for what keeps my router to communicate with the printer of mine. Any help would be appreciated. Thank you.

  Using the printer management page, make sure you on the JetDirect Automatic for networking information. If your automatic support of networking, it must acquire an IP address from the router if the LAN cable is in good working condition. Make a print on the printer configuration page to see what IP address it acquired from the router.

  If you decide you want to put a static IP address on the printer, make sure you on the JetDirect information
  Manual and instead use 192.168.1.110 tends in the poole DHCP address, try using 192.168.1.26. You will need configure the printer driver in windows accordingly to point to the IP address.

• E2500 share directories or files

  I found some similar topics that really does not solve my problem. I replaced a WRT54G with an E2500. The wired PC runs XP SP3 THAT, wireless computers are (1) v. 7 and XP SP3 (1). Print sharing works well, but all the files on the "host" PC shares fail. I ran "net share" disabled all of the directories on the 'host' and even wireless computers, then restarted all. The Win7 PC can see the only directory that I put in place to share, but when I try to open it, I get a message that the directory is inaccessible (maybe due to permissions) and «there is not enough available to process the command of storage server» XP PC wireless gives the same error, but can access the printer and see the directory to be shared on the 'host '.

  Note - I do not disable the printer sharing before restarting, and if I put in the old WRT54G, the file and print sharing work correctly. I know I'm missing something simple, but I can't make it work. I also doesn't change anything about the homegroup on any PC.

  This could have something to do with the IRPStackSize registry entry on the computer that is located at the lowest. Check the resolution from this link: http://support.microsoft.com/kb/106167. Try this link also: http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/48fa965f-6008-4a46-aaf2-a3f2573...

• E2500 - upgrade the Firmware 2.0 killed 5 GHz Portal

  I have improved my E2500 wifi router and since then my 5 GHz portal does not transmit.  My cell phone not noted in the beach.   Is this a known issue?  Ed S.

  Hello edspyhill09. Did you reset and reconfigure the E2500 after the update of the firmware? Also, try to access the user interface of the router and check if the SSID of the 5.0 GHz network broadcast has been disabled. To access the interface, click on this link:

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3676

• Linksys software connection E2500

  Recently, I noticed that I can not in advanced mode (E2500) using the software Connect to Linksys, it only shows the DHCP Client table and that's all. I tried to reinstall but not good, tried to use the IE browser window and not Chrome also no good. I try to avoid EN and firm, but that seems so inevidable. Any other suggestions would be appreciated. Thank you.

  Reinstall and Factory Reset worked. Thanks for the reply.

• Improved WRT54G2 to E2500. E2500 can't find my ethernet network printer

  I just upgraded from my old WRT54G2 to the E2500 yesterday.  Everything works (internet, wireless, etc.).  However, the new router is unable to see my Canon Copier/printer, which I connected via an ethernet cable.

  He connected very well with the old router in the same configuration.  Would appreciate some ideas on what could be the issue.  I have a feeling that it is something simple that I think not.

  Thank you.

  Ok. He was happy. Have fun.

• Problem with linksys e2500 (l2tp)

  Router: linksys e2500

  WIndows: XP

  Country: Russia

  Supplier: Flex

  Hello!

  I have a problem with the l2tp connection. My provider only supports l2tp (with encryption - interference). Where can I find option to turn off encryption - scrambling for l2tp? Or how I can fix (solve) the problem.

  THX, best regards!

  thx for the answer! I have a tplink, and it solve my problem with the internet. But I need of DDNS that work only with linksys (TZO.NET). I bought the account for 1 year. My tplink does not support DDNS (TZO.NET).

  I'll try "you can try third tomato and DD - WRT firmware and see if it works" thx.

• E2500 problems

  Hi, I just bought a router wireless E2500.  I can't find a way to access the settings of the router.  I went to 198.168.1.1 but it wont let me connect.  I found suggestions to use name of username/password: admin/admin / admin, Admin/admin and none of these work.  When you try to set up using the CD, it is said that it does not find the router.  I tried to reset the router/modem several times, I did the reset of the router, my DNS to hot flashes, nothing works.  Yet I can still connect to the internet from two computers using a wired connection.  Also, I do not see any wireless network current (at least called linksisXXXXX where XXXXX is the last 5 characters of the serial number).  Any help would be appreciated.  Thank you

  Hi DraegonX. Reset you the router by pressing the reset under the device for 30 seconds? Please press and hold when unit is turned on. Release the button and unplug the unit. I asked, becausem others confuse the WPS button as the reset button. Please check the picture for the right pair.

• Proxy Server adding custom in E2500

  Hi all

  I am unable to locat an article here or Google about my question.

  I'm wanting to add a proxy server in a default configuration of Linksys E2500 for content filtering.

  The server is in the format: proxy.company.com

  When it is added to the Internet Options of a computer when it says computer tries to access the Internet invites you to a login page of "blocked.company.com/authenticate" where they need to type a user/pass to access the Internet.

  Could someone advise me if I could add this in a Linksys E2500?

  AFAIK none model Linksys do support this type of functionality.