E280 plugged into a USB port may be bad and it fried my sansa?

Similar Questions

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• SansaFuze lights when plugged into the USB port.

  Hi.My SansaFuze won't turn on when I plug it into my USB port and I don't know why. He worked on Saturday but still doesn't work. Any help?

  Thanks dude. I didn't know the back USB ports. You, Sir, are my heroes. Again, I can put music on my thing. Thank you very much.

• Upgrade laptop XP on the new home network. Shared for laptop drives. Now computer laptop poster not the zip drives that I plug into the USB ports.

  I have a xp desktop machine, an external hard drive, computer laptop xp and a computer laptop win7 on a network home via my Lynksys wireless router.  My friend attached external desktop.  Then shared these discs on the network.  He shared them as drives E and F.  I can access these drives very well.  The problem is that on the computer laptop xp now when I click on my computer if there is no zip drives or anything else connected to the computer laptop USB ports it does not show them.  If I go into Device Manager, it shows the mass storage device connected here.

  Another thing.  If external that are shared and the desktop machine is turned off the coast, I can click the icon to the desktop and it displays the zip drive, that I plugged.  It's like I need to rename or remap something?

  Hi crazypainter,

  When you plugin your USB device, just follow the following process:

  Rigth click my computer-> manage-> disk management.

  You will find your hard drive, cd and USB dirve listed player, you can do a right click on the drive letter and click on modify.

• HP Officejet 8500 A909g is not recognized by my computer when plugged into the usb port

  I received an email from HP recommend I install new software for my Officejet Pro 8500.  I downloaded the software and installed.  The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer).  When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized.  I checked the box to install all the software and install the printer later.  Now is back, and the printer is still not recognized by the computer.  Help, please.

  Hi Steve_finch,

  What operating system you have installed on the computer?

  Have you tried a new USB cable or a USB port on the computer?

• PNY USB 2.0 key does nothing when it is plugged into my usb port. running windows7 home premium. Help?

  Windows 7 compatibility page shows pny 4 GB attached mini usb 2.0 drive compatible with no additional downloads necessary. PNY show instructions for loading manually driver for win 98 only. Download driver I tried the detective, no help. all of the suggestions. try to use the usb for quicken deluxe 2010 backup instead of cd

  Hello

  For this USB drivers should be installed automatically by Windows 7, when you connect the player to what messages we get as appropriate, if you open the computer to open the drive it appears as a removable device?

  If not and with only the connected USB device opened upward Device Manager (Manager type of devices in the area start search to quickly find) then open the USB Buss controllers branch, click it + and looking for USB Mass Storage Device righ click on uninstall, then unplug and plug in the USB pen and see if Windows loads the drivers ok.

  If not there yet with the USB pen connected open disk management and check if the USB key is listed as a removable drive, it may simply need to change its drive letter, change it to X, Y or Z for example.

  Some info on the disc switch letters HERE

  There may be a crisis today... my schedule is already full

• I lost the little thing that plugs into your usb port for the keyboard wireless & mouse. Where can I buy another?

  Microsoft 5000 wireless comfort. Where can I replace the usb thing that makes the mouse and keyboard work?

  Hi, Becyaloyd,

  You posted on the Feedback Forum.  This message is in the hardware forum and drivers.  Please take note of the drop down menus:

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware

  Where you initially bought the whole?  You could try to contact the staff of store if nearby.  They may have additional elements of broken games.  Or, you can try to contact Microsoft for a replacement.

  Or call: 1-800-Microsoft (642-7676)

  http://www.Microsoft.com/hardware/en-us/p/wireless-comfort-desktop-5000/CSD-00001#support

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• My computer does not start if HP Officejet Pro 8600 is plugged into a USB port.

  If I unplug the printer and then turn on the computer, it starts very well.  The printer works fine if I don't turn it on until the computer is already running.

  Hello sycomp

  I discovered that your computer has an update of the bios that needs to be installed. I of course do not have the printer plugged in until the bios update. Interestingly, one of the States listed corrections it solves a problem starting when the 8250 Photosmart is connected. It can solve your current problem as well. The link below is to the appropriate download page.

  Update Bios HP Pavilion a844n (Windows XP)

• How can I transfer/copy a program from the hard drive on my computer on an external hard drive plugged into a USB port on my computer?

  transfer of a program on an external hard drive.

  What exactly are you trying to accomplish (goal)? You cannot save a program by copying its files/folders in Program Files in an external hard drive. To save programs, you must save the installation - CD, DVD, or the installable executable if downloaded media on the Internet.
  MS - MVP - Elephant Boy computers - don't panic!

• USB ports not recognizing keyboard and the mouse after sleep

  I have a wireless Logitech and mouse keyboard. These connect to my PC (Vista32) wirelessly via a USB plug small heel I plug into a USB port. Logitech called "Unify" which, according to them, is standard to connect devices through a USB port. My mouse and keyboard work fine when I restart my computer, but when he goes to sleep and I me re - wake up there that they do not have. I force power off of my computer because I can't access my account.

  I have ensured that the selective suspend setting in settings usb in advance power settings is disabled. Support Logitech seem unable to help him.

  Hey Sinclair,

  You can refer to this link suggestions and answer us with the State of the question.

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://support.Microsoft.com/kb/928631

  Also refer to this link: How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume

  http://support.Microsoft.com/kb/953367

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps.

• When I plug my Galaxy s captivate phone into the usb port on my computer, it will charge the phone but will not allow sharing of information from computer phone.

  Original title: usb with smart phone problem

  When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you

  Hi Mike,.

  Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone.

• How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

  Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

  Hello

  Thank you for keeping us posted.

  Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

  Consult the manual of the manufacturer, to do the same thing.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Hope this information helps.

• Windows Media Player doesn't work when I plug my MP3 player or flash drive into any USB port.

  Victorinox original title: Media player closes on MP3 device.

  Recently WMP gives me the message "a problem has been...". "When I plug my MP3 player or flash drive into any USB port.  Then it crashes and I have to close it manually.  Any ideas?

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2. what version of Windows Media Player do you use?

  3. What is the full error message that you receive?

  I suggest you to rebuild the database from the Windows Media Player library. Subsequently, check if the problem persists:

  If you use Windows Media Player 11, refer to this link: you cannot view, add, or delete items in the library of Windows Media Player 11

  Hope the helps of information.