E3000 and external hard drive (USB and Ethernet

Similar Questions

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• How to work with files of database on an external hard drive (USB 2.0 or 3.0)

  I have Oracle 11 GR 2, installed on my laptop. I would like to create an instance of the database on my laptop, but putting the data files on an external hard drive (USB 2.0 or 3.0). The external hard drive will be still attached to the laptop, whenever the database is used. This is going to be a development machine, recently developed a prototype. Laptop is limited to 150 GB on the local disk and I want to have a database of 1 to on this subject. Is this possible with Oracle 11 g for Windows XP SP2?
  I assume that a device attached to the network storage NAS would be the best solution, but I can't fix on my local network.
  Thank you
  Milan

  Hello

  Yes, you can
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1388988500346624289

  Thank you

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• External hard drive USB

  Primarily for backup purposes, I have connected via USB, a new external hard drive to my Compaq Presario (using Windows 7) but I don't see how to access or use. Removal and replacement of the plug USB produce noise sound from the PC that I expect.  Start/computer shows no signs of the element. Start/devices and printers displays an icon for the item, but clicking on it gives no response.   Where should I go from here?

  BrianJoyce wrote:
  

  AHA!   I think you're right about that!   The power, I mean.   It ran OK on laptop from a friend and I tried all the USB ports on my PC but with no joy there.   I think the answer will return for an Exchange or a refund and get a different model.

  I return it for an Exchange/refund and get a USB 2.0 in this case.

  Best regards

  ERICO

• External hard drive USB PX1223E - 1 32 guard disconnection/reconnection

  Hello

  I'm new to this forum, so I hope I'm posting in the right place.

  The external hard drive works fine for over 2 years now, but it has started to randomly disconnect from my PC. I have the USB to say alert that it has disconnected and then moments later it seems to reconnect with the usual USB alert. Occasions, it seems to work for hours without the problem return.

  It is a sign that the reader reaches the end of his life?

  Thanks for your help

  Hello

  Perhaps the reader reaches the end of the life, but at the moment it is not easy to say...

  Have you tried another cable to the HARD drive? Maybe it's just a problem of cable s.
  In addition, you should check the HARD drive on another computer or laptop. So you can make sure if it s a USB issue or not.

  Welcome them

• SMART Disk FireLite 80 GB external hard drive USB drivers

  My computer does not recognize my drive external hard disk smart firelite 80 GB usb at all...

  Plug in there and nothing, the blue light is on the disk. But when I check in 'MY COMPUTER' just shows how many slots usb ate open, but nothing else...

  This drive worked at one point but now?

  Thanks for any help

  George

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. that you get an error message while you connect the external hard drive?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to connect the hard drive to a different USB port or try to connect the hard drive in another computer and check that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: If the previous step fails, check if the hard drive is detected in disk management.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

   

  Method 4: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• External hard drive USB, not received a drive letter in Vista 64-Bit

  I do not use my BeyondMicro 160 G external hard drive a lot just to make occasional backups, well this time was different.  I have powered the drive, plugged the USB cable into my PC and normal tone was heard, but NO drive letter is assigned to the drive.  In fact I couldn't find anywhere in my computer that the unit was even detected.  I Visa Ultimate 64-bit, I tried to uninstall the drivers in the Device Manager and rebooted and still no external drive, any suggestions?

  Konala Hello,

  Thank you for your response.

  If the external hard drive not detected below are some steps to solve the problem:
   
  You can check if the device is compatible with Windows Vista by visiting the Windows Vista Compatibility Center, which includes a list of drivers, hardware and applications that are compatible with Windows Vista.
   
  For reference, the link to the Windows Vista Compatibility Center is included below:
  http://www.Microsoft.com/Windows/compatibility/
   
  Then, if the external hard drive is not detected in Device Manager, please check if the external drive is detected in the management of the computer:
   
  You can check this by going to: start then click on computer
  When it is connected and switched on, the drive should appear as a drive letter on the computer (ie: drive E:, F: or another letter.) An Autorun window may also appear if the drive is detected.
   
  If the external drive does not appear, please check the following:

  · Check the power supply and check if it works normally.
  · Check the wiring and check that the USB cable is plugged into a port. You can also try another USB port.
  · Check disk management to see if the drive is detected it:
   
  1. right click on computer, select manage, select disk management.
  2. check the upper and lower windows to find if the drive is detected.
   
  If the external hard drive is not detected, try to connect the external drive to another PC to check if the unit is working normally.
   
  Then please check if Windows Vista Service Pack 1 is installed currently.  If WVSP1 is not installed, you can try to install this service pack and check if the problem still persists.
   
  For reference, the link below contains information. about how to obtain the latest Windows Vista service pack:
  http://support.Microsoft.com/kb/935791/
   
   
  The relay please status after the above steps so that we will offer any additional assistance.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

  Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

  I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

  Hello

  
  1. have you checked if the external drive is detected on another computer?
  2. What is the exact error message you get when the task fails?
   
  To work with the issue, check out the following link.
  
  My drive does not appear in Windows Explorer
  
  http://support.Microsoft.com/kb/330140
  
  Check if it helps.

• External hard drive USB recognized as a drive in Windows 7

  My external drive was not functiononing, so I formatted it recently. I gave him a normal speed format, using windows only. It is an external hard drive, 256 GB, connected via USB 2.0, formatted to NTFS.
  After it was over, windows began to recognize the local drive, making it impossible for me to remove it safely (he does not give me the opportunity to do).
  My concern is that it can affect some of my files if I just unplug the unit. I googled but didn't find any results that worked for me.
  Any ideas for what to do? I'm not really good at these things. but I really need my perfectly functional hard drive.

  It is normal for hard drives, they are USB drives physically internal or external, and the "Local Disk".

  • Open the Device Manager (start, type "Device Manager" (without the quotes) in the search box, press enter)
  • Expand the category of "hard drives".
  • Right-click on your external drive and choose 'properties '.
  • Click on the tab 'Strategies '.

  The default value for the drives connected by USB is 'Fast moving' which, as the option explains "disables the cache on the device and in the entry window, but you can disconnect the device safely without using the safely remove hardware notification icon."

  Or you can choose the "Best Performance" which "allows the cache in Windows for writing, but you must use the remove hardware notification icon to disconnect the device safely."

  Make your choice, click OK, and're you good to go.

• Cannot eject external hard drive USB

  Original title: problem ejecting usb mass storage device

  Hallow

  I have a WD drive and when I try to remove it safely I get the following error:

  "the application".

  '\Device\harddiskvolume4\Windows\System32\svchost.exe' is

  This device can be stopped. Close the application and

  then try to stop the device again.

  p. s.

  I have important data on this disk

  This error does not occur with any other usb

  I tried the Task Manager

  throws his mercy on me I'm not a computer genius and

  my English is not the most brilliant as you have probably noticed

  Thank you to everyone willing to help

  Itay

  Hi Itay,

  Thanks for posting on Microsoft Community.

  I understand that you get this error "the application \Device\HarddiskVolume4\Windows\System32\svchost.exe prevents this device to be stopped. Close the application and then try to stop the device again. "Whenever you try to eject the external hard drive.

  You may get this message if Windows was started with the inserted disc. Try to wait until Windows is completely loaded before inserting it, then if you try to eject it doesn't work.

  You can try the suggestions below and check if it helps.

  1. Download Process Explorer from the link below http://technet.microsoft.com/en-us/sysinternals/bb896653
  2. Click search, find handle or DLL (Dynamic Link Library) in the tool menu.
  3. Type the drive letter of the USB device in the handle or DLL substring text box and press the search button.
  4. Find the process and its PID (process identifier) in the following box.
  5. In the tree of the system process, find the process according to find it handle or DLL dialog box.
  6. Press Ctrl + H to display the handles in the view in the lower pane.
  7. Search for the file by the drive letter and right click, choose Manage close.

  Reference:

  Problem ejecting USB mass storage device

  http://support.Microsoft.com/kb/555665

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to contact us for any further assistance on Windows.

• 400 GB external hard drive USB (PX1273E - 1 40) is internal SATA or IDE?

  Hello

  I consider burning this external hard drive (PX1273E - 1 40) and would like to know if the disk inside has a SATA interface or an IDE interface, in the case of the latter in I decide to open, take the drive and connect it to the computer internally.

  Anyone know this information?

  Thank you.

  Hello

  Unfortunately, I didn't find all of the information on the interface type of the enclosure.
  In my opinion, it could be an IDE interface but I m not100% sure.

  But never fear, you can buy a 3rd party SATA to IDE adapter and was able to connect the HARD drive if it will support different interfaces.

• Windows Live OneCare restore tool does not recognize my external hard drive USB

  Vista recognizes the external hard drive where I have a stored Live OneCare Backup folder, but OneCare restore tool doesn't like a local disk.

  When I turn on network sharing for the external hard drive, I can get him in the OneCare dialog box, but it still does not recognize a backup folder.

  What kind of folder don't restore OneCare search, one called Windows OneCare Backup or any of the subfolders?

  http://social.Microsoft.com/forums/en-us/category/windowsliveonecare/

  Above is the care Forums a Live.

  http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads

  Windows Live OneCare Backup and restore

  They will help you in the Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• External hard drive USB not recognized by Win XP Satellite

  My Satellite S105 running Windows XP Professional SP3 works well with any external SSD.

  Yet my external USB hard drive from Seagate Freeagent is visible sometimes and not others. The Seagate works very well except when it is invisible to Windows. Removing the drivers USB (re-installed by windows) does not change this. The drive is not visible in my computer or elsewhere. Dirve of Seagate Manager does not detect the drive in these moments there.

  What is the solution?

  Thank you.

  I guess that other external USB devices (USB flash drive key, mouse, etc.) are working properly and don't disappear in my computer. Is this good?

  This means that this issue has nothing to do with the laptop or USB ports for s laptop but with your external USB HDD.
  A maybe it's some kind of problem with the USB HDD. ?:|