E3000 as or to get a better access point?

Similar Questions

• I get the error access path/file execution error ' 75 "you try to start a product.

  I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?

  Hello

  1. when exactly you get this error message?

  2 have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, make the boot minimum troubleshooting and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Can E3000 to function as only access Point or should I return it?

  Hi, Ok, I know I acted probably stupid, but I needed to access as a guest of Setup wi - fi which supplied routers LinkSysys. I don't need the router/modem I want to just have a wi - fi access point. I am an advanced user and I can work with manual configuration etc.

  I tried to do a manual installation of the router, I changed the IP, mask of my network and activate the wi - fi and has worked, BUT the guest access option is NOT available unless you use the stupid CISCO connect software.

  Now the cisco connect IS NOT software work or complete installation, if you do not connect through the router and access the Internet, which is IMPOSSIBLE for me to realize that my modem is connected to a firewall device, and we use static DSL PPPoE options and usernameme and password. There is no way I can get cisco doesn't connect to properly charge because it always "fix my connection trying to access the Internet.

  Y at - it any solution on manually properly configure this router and take full advantage of it capabilities or should I return it?

  PS: If the answer is "return" Please do not hesitate to provide me with an alternative that supports the wi - fi access COMMENTS (I do need separate vlan users to a WiFi connection to connect to the internet access BUT WITHOUT HAVING any where on my LAN)

  Thank you very much.

  Best regards, Vassilis

  As I wrote before: it is impossible with the devices that you have...

  The network of comments on the E3000 (and model consumer of any other brand with the same function) only works if the E3000 is your main Internet gateway.

• Satellite Pro L10: where can I get a better graphics card

  Hey

  I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

  Thank you very much

  Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

  Good bye

• When I click on the "Send" icon to send a link, I get the message "access is denied"

  I never had a problem with the icon of e-mail message before. Now when I try to send a link to someone, I get a message "access denied." I'm not technical, but have tried everything I can and restarted.

  This has happened

  Each time Firefox opened

  Is today

  I have exactly the same problem.

• How can I get my name from the access point?

  Since I bought a modem Arris 228 G and spent my 2 wireless, printers Canon WIFI unable to connect at Optimum!

  Canon said to contact my router creator (Apple Airport Extreme) for the name of the access point get return wireless, WI - FI printers.

  Help, please.

  W.W.

  (Mac Pro 10.6.8)

  The name of the access point is simply the name of the wireless network that provides AirPort Extreme.

  You can see the name of your wireless network by clicking on the WiFi icon at the top of the screen of your Mac and by checking that the name appears.

  

  There will be a check mark next to your wireless network name.. which is also known as a wireless access point.

  It would be the same name that you had before... unless you have changed some settings on the AirPort Extreme.

• How can I using an apple extreme get a better signal around the House?

  How can I using an old apple extreme get a better signal around the House?

  I use an old apple express and a new express from apple.

  I need to update my extreme from apple for the last device namely a time capsule.

  Can I use my apple extreme connected to my new camera add more points around the House?

  What is the model number of the old AirPort Extreme?

  What is the model number of the old AirPort Express Terminal?

  We assume that the model number of the new AirPort Express Terminal is A1392, correct?

  What connects to what now on your network?  It looks like this?

  Internet connection > Modem > new AirPort Express?   How the old Express connects to the new Express?   Cable?  Wireless?

• I need to configure UPnP to get a better connection for Xbox live

  I need to implement UPnP to get a better connection to xbox live. could someone help or tell me how to activate it?

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I recently purchaced a Netgear wireless router. I can't get any Internet access every time I connect to the internet.

  I recently purchaced a Netgear wireless router, I can't get any Internet access every time I connect to internet

  Hello

  Your computer connects to other networks wireless?

  Check with the Netgear support, their online documentation, firmware and ask for their
  Communities and Forums.

  NetGear
  http://www.NETGEAR.com/

  NetGear - Support & community
  http://support.NETGEAR.com/app/

  NetGear - Forums
  http://forum1.NETGEAR.com/

  -----------------------------------

  Have you checked the updates or re-installed the driver of your WiFi? Check with the manufacturer of the system (motherboard
  Manufacturer of custom systems) If an edge device and/or the manufacturer of the device.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

  How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

  Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Restore access to My Documents after reinstalling XP, I get the message: 'access denied '.

  Original title: restore access to My Documents after reinstalling XP

  Recently, I acquired a virus with which Microsoft Security Essentials could not cope.  Then one day the computer refused to start.  I wrongly assumed that my hard drive was dead, so I installed a new HD and reinstalled Windows XP.  [Actually, I first tried the upgrade to Windows 7, because program upgrade windows 7 Microsoft has already said that my computer was compatible... but Windows 7 disk says otherwise!]  Then I tried to install the HD original in an another drive Bay and discovered it still worked, but I could not boot from it.  Apparently, the virus has killed the OS (Windows XP) but my files, programs and documents are still there.  The problem is that when I try to access my old "My Documents" folder, I get the message: 'access denied '.  I believe that this is because the files are stored in a password protected user account.  I know the password, but I do not know how to access the files.

  I tried to create a user account on my new HD (with the operating system Windows XP reinstalled) with the same name and the password that I used on my original (with the Windows operating system XP corrupted) HD to create all the document files.  However, opening a session with this account name and password did NOT restore my access to the My Documents folder on my original hard drive.

  I'm out of ideas.  Help, please!

  Hello

  Try the steps from the article below and check out them.
  "Access denied" error message when you try to open a folder
  http://support.Microsoft.com/kb/810881

  You may be interested to have a look at the article below.
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

• External hard drive problems - we have most of the files to get a message "access denied."

  USB connected external hard drive was used with XP.  For a small period of time, we had to connect to a machine from W7.  Now that we are back to the XP machine, we have most of the files to get a message "access denied."  How we fix the problem.  The files are images, videos or music.

  Try this,

  Start in safe mode.
  Open your computer and right click on your external hard drive.
  Go to properties.
  Click Security.
  Click on Edit under a quote "to change permissions, click on change."
  Click on Add.
  Type in "everyone" in the white box.
  Then check in the box "total control".
  Press OK.

  This makes the hard drive usable by everyone (all users and different computers)

  I hope this helps.

• I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  Try to use Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml this programs often works when the normal functions of remove Vista not work correctly.

  If this does not work, you need to change the permissions and ownership on the file in order to have all the rights and the property (even on the inherited rights).  Then try Unlocker.  Here's the information to help you do.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 Compadtibilty Pro

  When I start the first items 11, I get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 compatibility profile context.  My computer crashes when I click OK.

  It should be in the same place. But do not set your Folder Options to show all files, or you won't see it!

• Having trouble downloading a picture on Adobe Stock, without the watermark and quality. Instead, I get only have access to a preview image.

  Hello
  Having trouble downloading a picture on Adobe Stock, without the watermark and quality.

  Instead, I get only have access to a preview image.

  Follow the steps in this post and see if that helps you back on track: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?