E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.

I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.

I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.

While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.

abandoned,

Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.

Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!

Tags: Linksys Routers

Similar Questions

  • Unable to do port forwarding, to connect to the VPN and install Windows updates

    first of all, I tried to launch a minecraft Server trying to port forward, had problems with this, so I tried Hamachi, wouldn't connect to the VPN, then I tried Tunngle, at least, it was more useful, so I tried to use Device Manager to search for tunngle found when trying to manually install it, then he said that he could not or invaild something (or something of the sort) then it says windows may need to be put updated to fix this problem, so I tried to update to windows and it will not be updated, he is stuck at 0%, I tried the thing to download the patch to update windows and that has not helped,): I DO

    Original title: Windows Update will not be blocked at 0%

    Hello

    Thanks for posting your query in Microsoft Community.

    Depending on your problem troubleshooting to establish a VPN connection, I recommend that you post your question in the TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    Hope this information is useful.

  • Default gateway when connected to the VPN

    Thanks for reading!

    It is probably a dump so bear with me the question...

    I set up a VPN connection with a Cisco ASA 5505 giving over the internet, with customers behind him (on the same subnet), when environmental connected ot the VPN I can reach the router inside giving me and the other pass behind the router (each switch is connected to the router), but nothing else.

    My beets is that the router is to play with my connection, but nevermind that!, Setup is not complete when even... my question is more related to the bridge I'm missing when I'm outside, is connected to VPN on the ASA, pourrait this BUMBLE? I would not a Standard gateway in the command ipconfig settings in windows?

    That's who it looks like now:

    Anslutningsspecifika-DNS suffix. : VPNOFFICE

    IP-adress...: 10.10.10.1

    Natmask...: 255.255.255.0.

    Standard-gateway...:

    The internal network is:

    172.16.12.0 255.255.255.0

    Here is my config for the SAA, thank you very much!

    ! FlASH PA ROUTING FRAN VISSTE

    ! asa841 - k8.bin

    !

    DRAKENSBERG hostname

    domain default.domain.invalid

    activate the password XXXXXXX

    names of

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 172.16.12.4 255.255.255.0

    !

    interface Vlan10

    nameif outside

    security-level 0

    IP 97.XX. XX.20 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 10

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    clock timezone THATS 1

    clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

    DNS server-group DefaultDNS

    domain default.domain.invalid

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    172.16.12.0 IP Access-list extended sheep 255.255.255.0 allow 10.10.10.0 255.255.255.0

    MSS_EXCEEDED_ACL list extended access permitted tcp a whole

    Note to access VPN-SPLIT-TUNNEL VPN TUNNEL from SPLIT list

    standard of TUNNEL VPN-SPLIT-access list permits 172.16.12.0 255.255.255.0

    !

    map-TCP MSS - map

    allow to exceed-mss

    !

    pager lines 24

    Enable logging

    timestamp of the record

    exploitation forest-size of the buffer to 8192

    notifications of recording console

    logging buffered stored notifications

    notifications of logging asdm

    Within 1500 MTU

    Outside 1500 MTU

    mask pool local 10.10.10.1 - 10.10.10.40 VPN IP 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm-625 - 53.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 172.16.12.0 255.255.255.0

    Route outside 0.0.0.0 0.0.0.0 97.XX. XX.17 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout, uauth 0:05:00 absolute

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    Enable http server

    http 172.16.12.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 65535

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 172.16.12.0 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    internal VPNOFFICE group policy

    VPNOFFICE group policy attributes

    value of server DNS 215.122.145.18

    Protocol-tunnel-VPN IPSec

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value TUNNEL VPN-SPLIT

    value by default-field VPNOFFICE

    Split-dns value 215.122.145.18

    no method of MSIE-proxy-proxy

    username password admin privilege 15 XXXXXX

    username privilege XXXXX Daniel password 0

    username Daniel attributes

    VPN-group-policy VPNOFFICE

    type tunnel-group VPNOFFICE remote access

    attributes global-tunnel-group VPNOFFICE

    VPN address pool

    Group Policy - by default-VPNOFFICE

    IPSec-attributes tunnel-group VPNOFFICE

    pre-shared key XXXXXXXXXX

    !

    class-map MSS_EXCEEDED_MAP

    corresponds to the MSS_EXCEEDED_ACL access list

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    inspect the icmp error

    inspect the pptp

    inspect the amp-ipsec

    inspect the icmp

    class MSS_EXCEEDED_MAP

    advanced connection options MSS-map

    !

    global service-policy global_policy

    privilege level 3 mode exec cmd command perfmon

    privilege level 3 mode exec cmd ping command

    mode privileged exec command cmd level 3

    logging of the privilege level 3 mode exec cmd commands

    privilege level 3 exec command failover mode cmd

    privilege level 3 mode exec command packet cmd - draw

    privilege show import at the level 5 exec mode command

    privilege level 5 see fashion exec running-config command

    order of privilege show level 3 exec mode reload

    privilege level 3 exec mode control fashion show

    privilege see the level 3 exec firewall command mode

    privilege see the level 3 exec mode command ASP.

    processor mode privileged exec command to see the level 3

    privilege command shell see the level 3 exec mode

    privilege show level 3 exec command clock mode

    privilege exec mode level 3 dns-hosts command show

    privilege see the level 3 exec command access-list mode

    logging of orders privilege see the level 3 exec mode

    privilege, level 3 see the exec command mode vlan

    privilege show level 3 exec command ip mode

    privilege, level 3 see fashion exec command ipv6

    privilege, level 3 see the exec command failover mode

    privilege, level 3 see fashion exec command asdm

    exec mode privilege see the level 3 command arp

    command routing privilege see the level 3 exec mode

    privilege, level 3 see fashion exec command ospf

    privilege, level 3 see the exec command in aaa-server mode

    AAA mode privileged exec command to see the level 3

    privilege, level 3 see fashion exec command eigrp

    privilege see the level 3 exec mode command crypto

    privilege, level 3 see fashion exec command vpn-sessiondb

    privilege level 3 exec mode command ssh show

    privilege, level 3 see fashion exec command dhcpd

    privilege, level 3 see the vpnclient command exec mode

    privilege, level 3 see fashion exec command vpn

    privilege level see the 3 blocks from exec mode command

    privilege, level 3 see fashion exec command wccp

    privilege, level 3 see the exec command in webvpn mode

    privilege control module see the level 3 exec mode

    privilege, level 3 see fashion exec command uauth

    privilege see the level 3 exec command compression mode

    level 3 for the show privilege mode configure the command interface

    level 3 for the show privilege mode set clock command

    level 3 for the show privilege mode configure the access-list command

    level 3 for the show privilege mode set up the registration of the order

    level 3 for the show privilege mode configure ip command

    level 3 for the show privilege mode configure command failover

    level 5 mode see the privilege set up command asdm

    level 3 for the show privilege mode configure arp command

    level 3 for the show privilege mode configure the command routing

    level 3 for the show privilege mode configure aaa-order server

    level mode 3 privilege see the command configure aaa

    level 3 for the show privilege mode configure command crypto

    level 3 for the show privilege mode configure ssh command

    level 3 for the show privilege mode configure command dhcpd

    level 5 mode see the privilege set privilege to command

    privilege level clear 3 mode exec command dns host

    logging of the privilege clear level 3 exec mode commands

    clear level 3 arp command mode privileged exec

    AAA-server of privilege clear level 3 exec mode command

    privilege clear level 3 exec mode command crypto

    level 3 for the privilege cmd mode configure command failover

    clear level 3 privilege mode set the logging of command

    privilege mode clear level 3 Configure arp command

    clear level 3 privilege mode configure command crypto

    clear level 3 privilege mode configure aaa-order server

    context of prompt hostname

    Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e

    : end

    Right if disbaled all traffic will pass tunnel and snack active local internet gateway is used specific traffic wil go to the tunnel.

  • Cannot send emails from gmail or yahoo when connected to the vpn

    I use a vpn to hide my IP address. When I am connected via my VPN I can't send emails from my gmail or yahoo accounts in thunderbird
    If I disconect vpn, they go through the fine

    Thanks for the suggestion, I've changed the security of connection for STARTTLS
    and they work

  • Connection to the SQL Server using Windows authentication

    I would use SQL Developer (v1.5) to connect to an instance of SQL Server 2005 uses windows authentication. I downloaded jtdw - 1.2.jar and set its e path as a preference in the TOOLS\Preferences Database\Third Party JDBC Driver dialog box.

    I was able to connect to SQL Server 2005 successfully if I use SQL authentication and provide a user_id and password.

    It is my preference to use windows for connection authentication. However, when I try to connect, I get the following error:

    Failure - i/o Error: library of native SSPI is not SSO unloaded. Check the system java library path property

    I have no idea what it means. I'm not a java programmer and I am very new to Oracle in general if someone can give me some guidance right ahead as to what lack me?

    Thank you

    After reading the thread referenced by Jim Smith (thanks!), I wanted to copy the information in this topic... and update to say that these same steps for SQLDeveloper 1.5.1 & SQL Server 2005. Don't miss step 5, if you want to enable NT authentication.

    {Of referenced post}

    SQL Developer for MS SQL SERVER 2000 Setup

    (1) install/extract SQL Developer 1.2.1 in C:\Program Files\Oracle
    Do {$sqldevhome} = C:\Program Files\Oracle\sqldeveloper

    (2) get the Pluggin JDBC SQL SERVER (jtds - 1.2.2 - dist.zip) of:
    http://sourceforge.NET/project/showfiles.php?group_id=33291&package_id=25350

    (3) unpack jtds - 1.2.2 - dist.zip
    Created: jtds - 1.2.2.jar
    \x86\SSO\ntlmauth.dll

    (4) copy the jtds - 1.2.2.jar in:
    {$sqldevhome} \jlib directory.

    (5) copy the dll in the \x86\SSO subdirectory ntlmauth.dll in:
    {$sqldevhome}\jdk\jre\bin\ntlmauth.dll

    (6) with SQL Developer:
    Go to the Menu 'tools '.
    -Preferences...
    Expand the "[+] database
    Choose "third-party JDBC Drivers.
    Click on 'add an entry '.
    Then locate your copy of '{$sqldevhome}\jlib\jtds-1.2.2.jar '.
    Note: Use the name of the jar file, not its parent for the input directory.

    7-restart SQL Developer and try your SQL Server 2000 (or SQL Server 2005) link

  • cannot connect to the local network using windows 7

    Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

    Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

    Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel connection to the Local network adapter * 9:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. :

    State media: media disconnected

    The connection-specific DNS suffix. :

    TEREDO TUNNELING Pseudo-Interface tunnel adapter:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. our field: *

    State media: media disconnected

    The connection-specific DNS suffix. :

    I tried to turn off the firewall and connect without success

    My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

    Any help would be appreciated

    Thank you

    Well Yes! So it was an older version of the bonjour service... thank you Adobe.

    You can find the latest version here:

    http://support.Apple.com/kb/DL999

  • Access to the external network when connected to the VPN

    I have a 5505 I successfully install an IPSEC connection to. It uses NT to Active Directory authentication to authenticate. After I log in, I can access everything on the remote network (internal). I can't access anything on the internet.

    Nothing behind the ASA can access internet, vpn clients that cannot come back on.

    Syslog messages show buiding vpn clients to the top and down the ICMP connections if they try to do a ping to the outside, but they are not answered.

    I know it's most likely a statement ACL or NAT that I am out of ideas?

    config attacched

    You have 2 options.

    Split tunneling, unencrypted access to internet.

    Public Internet on a stick, integrated internet traffic to ASA and back on.

    permit same-security-traffic intra-interface

    Global 1 interface (outside)

    NAT (outside) 1

  • requiring a client firewall be present when connecting to the VPN

    Is there a way to set the firewall need a group, as it is present to a concentrator vpn to connect vpn through a PIX, customers or is that the game buy a hub of additional features allows you to?

    Thank you

    Bill

    go to configuration group policy for the policy that you are wanting to change and use the command below.

    client-firewall-fire [opt | req | none]

  • Cannot access Internet when connected to the VPN

    I have mobile users using the Cisco VPN (4.0.5B) connection to a 837 customer. They can connect and access resources network in-house/remote ok. However, they are unable to access the Internet at the same time. I also had this problem where some users were connecting in a PIX, but managed to settle only by using the vpngroup tunnel of splitting and appropriate ACL commands. All I can find on the Cisco site is that it is possible by specifying an ACL, bit I don't know where to specify them this and that. Thank you.

    Here are examples of code,

    access-list 100 permit ip<837 inside="" net=""><837 inside="" net="" mask="">

    ISAKMP crypto client configuration group ciscovpn

    key cisco123

    pool vpnpool

    ACL 100

  • Error 720 when connecting to the vpn.



  • Screen BACK up when you start the computer by using Windows XP

    I did a reinstall of my OS to Windows XP.  Now, every time I turn on the computer, or restart, I get the following message appears on a black screen (BACK):

    (I use the quotes to the messages from the computer).

    "Choose the operating system to start".

    "Microsoft Windows XP Home Edition" (this option is highlighted)

    "Microsoft Windows XP Home Edition" (repeated).

    "Use the top and down arrow keys to move the selection of your choice."

    "Press ENTER to choose."

    "Seconds until highlighted choice will begin automatically."  (There's a digital countdown to 25 to zero... and the computer continues normally)

    "For advanced troubleshooting startup options and for Windows, press F8."

    If I press the key "enter", with the first option highlighted, the computer will resume as usual.  But I've never met this before start screen.

    How can I get the computer to restart normally without stopping on this screen?

    Thank you very much for your help!

    Hello

    You format the drive that had Windows XP and reinstall Windows XP on it?

    The following articles may be useful:
    To specify the default operating system for startup
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_startrecover_default_os.mspx?mfr=true

    How to edit the Boot.ini file in Windows XP
    http://support.Microsoft.com/kb/289022

  • Lose the internet while connected to the VPN

    I've seen quite a few threads of not being able to connect to internet when connected to the VPN. I tried to follow but have not be able to follow. I connect to the VPN via IE (that is connected by using Check Point). How can I go about it?

    That's the problem of split tunnel. In general, the VPN tunnel can be configured on the client side (as the native client VPN PPTP in Windows for example) or side Server (like OpenVPN for example) to force all traffic through the VPN tunnel or not. If all the traffic is forced through the VPN tunnel, which is what your description, internet access is controlled by the VPN server. It is a safety precaution to isolate the network side server from your local network.

    I would check with your network/VPN to help admins simply because may fall you on a server-side config that may or may not be changed according to their network security protocols.

  • Why can't I access the modem 192.168.1.1 when connected to the wireless router?

    I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

    This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.

  • IPad no charging current after the update to IOS 10, when connected to the laptop.

    My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

    PL suggest how to overcome this problem.

    Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

  • How long it take restore iphone when connecting to the computer

    How long it take restore iphone when connecting to the computer

    Is based on the amount of data to restore. How long do we have?

    GB

Maybe you are looking for