E3200 admin page expires

Recently, I tried to change the settings on my E3200 and could not access the page. I typed in 192.168.1.1 in the address bar, evening that no proxies have been activated and tested on computers with cable and wireless and all the time he said "page could not be displayed" I don't have not reset with the button on the back, but I was wondering if anyone else had this problem and have been able to remedy. I also did a router nmap scan and it came

Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT     STATE SERVICE
139/tcp  open  netbios-ssn
443/tcp  open  https
445/tcp  open  microsoft-ds
1780/tcp open  unknown

Any help on this would be appreciated! Another note, I got active remote access and opening port for remote access does not appear on the display above nmap scan.

Try https://192.168.1.1/

Tags: Linksys Routers

Similar Questions

  • Activation of DLNA Scan with Tivos admin page expires

    I wanted to go and reset my ReadyNAS long running and stable to pass the time to backup my files of Tivo 02:00 to 15:00, I would be put in place for centuries on an old version of firmware.

    With 6.4.2 I rebooted and went, adjusted at the time, recorded the change and rebooted the NAS server.

    When he returned to the top, he says that the Tivo server is disabled, so I enabled it, clicked on save, let it scan for Tivos and it then disconnects the admin page and I can't log back in there because he's too busy.

    I've never seen this problem before, but I have also never do any work on the Tivo backup process from 6.4.2.

    Any ideas? as the unit is not to a point I would say even if the Tivo server and backups will run.

    dianebrat wrote:

    No,

    I consider not me having to go on my own and software version beta test as an "acceptable solution" as much as this issue was not mentioned in the release notes.

    I'll leave that question open up to 6.5 came out as a candidate of the final version.

    6.5 is released a few days ago.

  • ReadyNAS 104 Admin page not accessible after firmware update

    Hello

    My admin page gives internal server error 500 since firmware upgrade 6.4.1

    I have noted a number of other posts on this topic but did not find a solution. Can still see some action and the unit can be seen on RAIDar, as well as through readycloud, but can not access the admin page to change the configuration or the applications.

    Concerning

    Steve

    When you updated to 6.4.0 your date has been reset. I wonder if that triggered it:

    31 Dec 14:09:51 McDonaldNAS apache2 [4838]: pam_unix(frontview:account): password expired for user admin (root applied)
    31 Dec 14:09:51 McDonaldNAS apache2 [4838]: pam_unix(frontview:account): conversation failed

    You should be able to access the local admin again page now.

    ReadyCLOUD also works now?

  • Cannot access admin page

    Hello

    I have a unit of the RN102 running v6.2.5 firmware. The problem I have is that after a day or so of the unit in place, I'm more able to access the admin page - it just expires. Everything else still works well, I can still access the Web user interface for other applications on the device (for example. BitTorrent Sync, Plex) then the device has completely locked up to drop off the network.

    By turning the NAS and the new solves the problem for another day or two, and then I lose access to the admin again page. In addition, he shut down using the power button on the front of the unit does not work, I have to pull the power cord to get it to turn off.

    Anyone have any suggestions for how to fix this?

    Thank you

    Sounds like Plex used too much memory and the system has met a low-memory condition.

    You might try rebooting the NAS. Then you should find access to the administration web page.

    The 100 series is storage economic and designed to work both in a limited quantity.

    If you do not use an application for example Transmission then I would turn off.

    There is a newer build ARM of Plex 6.x to plex.tv/downloads that I guess you can try if you want.

  • How to keep a web page expire due to inactivity

    I do an online school and pass a review final but have no time to finish and I cannot close it because I only have one presentation, is anyway I can keep the page expires while I'm at work so I can finish it when I get home

    I'm not sure that I trust with it without testing first, but you can try to use an add-on that stores your entry form and can restore it if you lose the page and come back.

    https://addons.Mozilla.org/firefox/addon/Lazarus-form-recovery/

    There seems to be a problem with the extension based on recent studies. I hope that will get cleared up?

  • I can't access my wireless router admin page...

    Hello! I have a wireless router from CD - R King (a local router brand not known worldwide). Before, I can access my router admin page wireless very well using firefox, but now he will just say 705 unable to connect to the server. However, I can still access it using IE, Chrome and Opera. Why is this happening? How can I fix? I tried to reset the router and unplug and plug in again... Help, please!

    You use the proxy?

    If your use of proxy, it refuses access to the local host.

  • R7000 can't access admin page and IP DHCP address range changed on its own

    I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

    I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

  • ReadyNAS NV Factory Reset cannot connect Admin Page

    I was just given a ReadyNAS NV without disks. I am a reader and slapped in, did a reset and everything went great. RAIDar indicates that the unit is in good health. I click on the admin page and it asks username username/password so I put in default admin/netgear1 and he says that it is incorrect. Could there be a name of user and password different?

    iMac15, 1-17 4.0 Ghz 32 GB RAM OSX 10.11.3

    Safari 9.03

    RAIDar 6.1

    NV Firmware 2.00

    Try admin/infrant1. If these credentials to work then you run the firmware which is old. You need to update the firmware.

  • Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

    Hi, I just upgraded to 6.4.2 to 6.5.0

    Before I reboot:

    Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

    I could see my SIN in Solution Explorer and browse the files.

    I rebooted and now it is happening:

    I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

    I ping the Ip and get an immediate response.

    I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

    The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

    Don't know what I can do at this point...

    We have tried to reinstall OS and nothing has changed.

    We have tried to unplug an ethernet, nothing has changed.

    The question has been reassigned to lvl 3. They came into tech mode.

    They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

    I put the HARD drive bad and resynchronization.

    hope this helps someone else.

    PS, The Netgear Customer Service is good and fast - recommended!

  • App installed fish cactus, can you connect is no longer at the admin page

    Hi all

    I'm having a problem where after I installed app Cactus of fish I can no longer connect to my admin page. Previously, go to myaddress:80 would bring me to the admin page. Now only myaddress:80 / admin leads me to the admin page and it crashes until he tells me "ReadyNAS 'Admin Page' is in offline mode." I guess it's a problem with the apache configuration (the system uses apache, OK?) I have SSH access, so if anyone can point me in the right direction it would be much appreciated.

    Thank you

    L

    The fixed. There was a site called activated phantom fv-000-http causing trouble. I deleted it, restarted apache and now http://localhost/admin redirects to https://localhost/admin.

  • Internet links on the Admin Page not by train to open in a new browser tab

    Hello

    For some reason any clicking / opening on weblinks no longer opens the link in a new tab on my browser for applications and the community, the link works, but opens in the tab of the Admin Page I launch go.

    No changes have been made to my browser, I use 6.6.0 - T95 on my Pro 4

    Really annoying, all ideas welcome

    My apologies, it was a matter of Firefox, not Readynas Admin, which I solved it now

  • No remote access to the admin page local account mynetgear

    I used happily log into my RN10200 remote and access to everything, including the local administration page. Who has been using ReadyCloud, i.e. before the access of the Web page without hope we get using mynetgear. Page Web tells me that it is no longer accessible on the same network?

    It's pretty useless, because I want to manage my remote NAS box as well!

    I want my access admin back please!

    I would add that I always get very happy fully my ReadyNAS Duo ReadyNAS Remote, even the admin page via. This makes me wonder why I got a downgrade from my accessibility on a new product?

    The images worked and I saw them, they just had not been approved yet (just fixed).

    Have you tried to download the ReadyCLOUD application using a different web browser?

  • Redirect https admin page?

    Hi Forum,

    I installed 6.4.0 without problems.

    However, the admin page is now exposed to the Internet over HTTP, which I see as a potential security risk.

    Is it possible to point the http://somedomain.nl/ to a webshare and point http://somedomain.nl/admin to https://somedomain.nl/admin?

    This will block remote access to admin pages, because HTTPS is not allowed on the router.

    On the internal network, I would still be able to connect to the admin via HTTPS pages.

    Figgered out. Let's say you have created a Web share directory from the Admin page, called "your_webshare_dir".

    VI /etc/frontview/apache/Shares.conf

    Change

    Alias "/ your_webshare_dir" "your_webshare_dir / data / '.

    Options Indexes + includes
    Order allow, deny
    Allow all the
    Options - ExecCGI
    AllowOverride None
    TO:
    AliasMatch "^ / (?). Apps/.*)(.*)$"" / data / your_webshare_dir / $1.

    Options Indexes + includes
    Order allow, deny
    Allow all the
    Options - ExecCGI
    AllowOverride None

    Nothing, except the icons of the apps in the Admin page will redirect to your webshare.

    VI /etc/frontview/apache/http-share-redirect.conf
    RewriteEngine on
    #RewriteRule ^ / $ / admin [R, L]

    This will disable the auto - redirect to the administration page when you go to http://your.domain.com/.

    VI/etc/apache2/sites-available/fv-http-admin

    Include "/ etc/frontview/apache/defaults.conf".
    Include "/ etc/frontview/apache/http-redirect.conf".
    Include "/ etc/frontview/apache/http-share-redirect.conf".
    Include "/ etc/frontview/apache/fv-admin.conf".
    Include "/ etc/frontview/apache/Shares.conf".
    Include "/ etc/frontview/apache/apps-https.conf".
    Include "/ etc/frontview/apache/READYDROP.conf".
    Include "/ etc/frontview/apache/lan-try.conf".

    Make sure that http - redirect.conf is included in the list of configurations.
    (Note: don't know why it's necessary, but it, it works for me.)

    WARNING: Use at your own risk.
    Known issues: these setting changes will be overwritten when you make an update of the firmware.

  • 5530th envy: flipping pages expire

    Hi, I would like to know if the flipping pages expire. Thank you.

    Hey @jomo1,

    Welcome to the Forum from HP Support.

    I understand that you are looking to learn more about flipping pages in the instant the ink program. I would like to advise you on this.

    As long as you remain registered to instant ink, your turning pages will remain in force. The only way that you can change their total by printing on the ceiling of your plan, either by reducing or increasing your rate plan. This means that if you have a package of 50 pages, you can turn a maximum of 50 pages or 100 for 100 page plan, etc.

    Let me know if you have any other questions about the instant ink - I'm always happy to help you.

    If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

    Thanks for posting in the Forum from HP Support. Have a great day!

  • LAPN600 could ' t connect to the admin page

    Hello.

    The first time that I also tried to connect to the admin page it worked. But now when I try to connect if I'm lucky, I can log in, but after that I just got "page cannot be displayed".

    I HAV tried to reset the LAPN600 but it dosent resolves the problem.

    Someone at - it more then me that have this problem?

    I found the problem. It was me

    When I tried whit my windows 7 computer was wired and my Windows 8.1 was wireless.

    I found a setting "Access of Configuration management->" Wireless: activate

    So my problem is solved.

Maybe you are looking for