e3511 printer align... any help?

Similar Questions

• In Photoshop CC 2015 attempt to print the results in a "cannot print because of a program error".  I'm on a PC (64-bit).  Any ideas?  Thanks for any help.

  Hello everyone.  I get a message error "Photoshop cannot print because of a program error".  I use a PC with CC2015 (64-bit).  There no problem last week when I finally printed.  Any help would be appreciated.

  Thank you

  Madiot

  As long as you can benefit from big enough sheet to print, it will be fine.

  You can remove the computer printer drivers and restart the system.

  Then, reinstall the printer driver on the manufacturing site.

  Thank you

  ~ Mohit

• Job search print a photo from iPhoto ' 09 book.  Any help?

  Apple apparently does not support books of photos from iPhoto ' 09 (8.1.2) more.  I tried to install Updater 1.1, but it does not help.  I created a photo book.  Is it possible to export it to another program to print.  I have an old MacBook and can't download the pictures OS X.  Thanks for any help you can give me.

  Apple supports more iPhoto on a never and a half and abandoned nearly six months iPhoto print products there is-, you can migrate Photos under El Captain but print products migrate well - PrestoPhoto print iPhoto books

  LN

• DesignJet 1055 cm prints cyan bands constantly any help would be much appreciated

  Hello world

  First, I want to mention that I am a technician in the field for all 20years on the road. My question here is that one of my clients have HP DesignJet 1055 cm that prints strips cyan on everything you send to the printer. Including test internal pages examples: test page for quality; demo page; Settings page. I replaced all the print heads to be sure before you start ordering spare parts. I also contact HP ASP support and sent them a picture and sound indicates the following parts in the following order. Trailing cable, transport and main PCB Board. Because this printer is no longer under warranty and chargeable to the customer, I want to ask this forum for further assistance. Please, any help would be greatly appreciated... SAL

  Hello world

  Guess what the main logic board was the problem. As soon as I replaced the main logic Board no more cyan stripes. Full closed appeal. Even if I ran the test of service never it report a problem with the logic board? Thanks for all help I really appreciate the help. Thank you

• How to prevent somone to print or send a PDF - any help? And I need to be able to do with a file PDF 10 000 to 10 000 different users

  How do I prevent someone from print or send a pdf document - any help? And I need to do for PDF 10 000 files and 10,000 different users.

  I'm desperate

  First of all, you must realize that truly control information is not a realistic proposition. People can photograph their screen, for example. Assuming that you accept the weaknesses, maybe the DRM is a possibility, although it sounds as if you need several administrators full time. Adobe LiveCycle Rights Management is a solution Adobe DRM generally used as part of a policy of control of company data - not ad hoc to solve simple problems - and usually something to get buy-in to the level of the Board of Directors.

• Install the ink cartridge in printer HPdeskjet. Any help welcome thanks.

  How to install a new cartridge into the HP deskjet printer?  Any answer to this question welcome thank you. emsea

  My experience is you open up the Panel above paper tray trolley is brought to the Center.  Remove the cartridge or the filler of transport remove the tape cartridge, insert it this end taaped goes first, inclined downwards. push snap down to lock it into place.

• When I click on the address bar or any key on the keyboard, I have more strong click and can print only at the rate of oneletter every three seconds. Any help, please?

  When I click on the address bar I get loud click and cannot enter a letter by pressing the button for 3 or 4 seconds. Any help, please?

  It seems that if you have enabled accessibility or ease of Access Options in Windows (perhaps keys filters). Without knowing which version of Windows you have, I can't point you to specific instructions, but here are some useful pages:

  Windows 7: http://www.microsoft.com/enable/products/windows7/
  http://Windows.Microsoft.com/en-us/Windows7/make-the-keyboard-easier-to-use

  Windows Vista: http://www.microsoft.com/enable/products/windowsvista/

  Windows XP: http://www.microsoft.com/enable/products/windowsxp/

• 6310 all-in-one prints crooked pages-help?

  Hi... yes I checked the paper, everything prints blank but slightly twisted. Bottom of the page is tilted to the right. I tried to play with the paper to see if that helps, but nothing so far. Love my quality printer, but I look sloppy with pages twisted... any help out there?

  Thank you very much!

  Namaste"

  Hello

  I suggest you rework the printer.

  Setup menu > tools > align printer

• DeskJet 932 c: 932 c prints alignment page but nothing else

  This printer worked like a champ since Windows 98!  When I recently switched from Windows 7 to Windows 10, he worked again like a champion.

  I replaced the black ink today, and he will just print the alignment page.

  If I try to print a test page, Windows 10 only tells me there is an error and it will not be printed. No error number or anything.

  If I try to print anything else, I get the same results.

  I have no orange lights, just the clear green power is on.

  If I open the lid, it points to the sad face with a top point.

  It is connected via LPT port, which I installed in my computer.

  I have no idea what to do now. Any help would be fantastic.

  Problem solved. I returned the faulty cartridge with a new one. Printer did not work. I returned the perfectly good ink cartridge and my money back. Then I bought another printer. And had leftovers for change.

• HP photosmart d110 - when I turn it on it starts up and gets as far as "now printing alignment page?

  HP photosmart D110

  When I turn it on it starts and gets regarding printing now alighment page and that's it... There is a red X in the upper right corner.  I can't take the printer to print a document.  It is the default printer.  I am running wireless and recently had to reset my router... This could be some of the problem?  It's very frustrating; any help you can give is appreciated.

  Blue wireless light flashes as it is the power button / stop.

  Kind regards

  Marvin

  It's strange. Looks like something in the alignment process is originally the printer enter a permanent error state. This is going to sound strange, but I think it will work. Let the printer goes to error state. Then, instead of turning off the printer by the power button, remove the power cord at the back of the printer. Unplug the power cord from the wall outlet so to reset the power module (it is the black brick in the power cord). Open the printer and slide the ink cart in the region that allow you to remove the ink cartridges and remove the ink cartridges. Close the printer, plug the printer back in and turn it on. When you are asked for your ink cartridges to be inserted, go ahead and put them in. Let me know what happens.

• 4632 HP Officejet printer: hp officejet 4632 printer stuck printing alignment page

  Help please.  My printer is stuck trying to print an alignment page.  I can't scan or copy anything to the printer.  I tried unplugging the printer with power, has waited more than a minute, reconnected and it did not help.

  I tried the scan doctor and she also did not help - Alternatively found printer was 'busy', or scan doctor tried to print an alignment first page and is stuck there. If I "jump" impression of the alighment with doctor to scan page, it prints a test page, it finds everything works "ok." "" "." Print alignment page"bypasses to jump the"print alignment page"printing, and yet the screen of the printer still says 'now printing alignment page', is stuck and I can't always copy or scan anything from the printer.

  I would greatly appreciate any suggestions I tried to solve this problem for several weeks.  Thank you.

  I think I've just fixed this problem after 3 weeks.  I actually tried the doctor print because it seemed to be a printing problem.  I just tried the scan doctor, he finds problems, led me through steps and printing and scanning seem to work now.  Phew!  That took much too long to fix, but glad it works again.

• HP color laserjet cp1215 - magenta print align with other colors - Toolbox freezes

  When you print anything that uses the cartrdidge magenta, magenta colour not aligned with the others. I had this problem in the past and have run some utilities from the Toolbox. However, the Toolbox freezes when I open it. I tried to uninstall and reinstall the software and drivers, but the same still. My guess is that the leaves to uninstall a registry record that's why relocation is not successful? Any help would be greatly appreciated!

  This "installation of the device has not completed" or the "Unknown device" Message appears in Windows during Installation of USB document includes a section on the conduct of a complete uninstall.   See this section: Solution 3: uninstall and reinstall the software of HP.

• OfficeJet 4615: Officejet 4615 stuck on "Print alignment Page" during the initial installation

  sharpen the printer begins to print page alagin and stuck

  the printer, printing from the computer

  I update the firmware and I do hardreset

  Hello @menybiton ,

  Welcome to the forums of HP.

  I understand that your printer is stuck on the print alignment page.

  I want to help you.

  I would like to remove the ink cartridges.

  Then another hard reset of preforms.

  When the printer asks the missing cartridges, reinstall them.

• OfficeJet Pro8610: OfficeJet Pro8610 will not print from any website

  I use Win7 (64 bit) with SP1 and I had to replace an OfficeJet 6700 with a new all-in-one. I did it with an OfficeJet Pro8610 yesterday.  After a struggle to get the printer works wirelessly (it was necessary to connect to my laptop (HP) via a USB 1 port) I went to an online brokerage account last night and printed a statement.  When I tried to do exactly the same thing today I can't print of this site I've always been able to do with my old 6700 OfficeJet-it'ds.  In fact I can not print from any Bank, brokerage, etc sites now.  I've uninstalled and reinstalled the drivers, both online and with the CD rom, I turned off the printer, the laptop and the router and I have the same problem.

  Has anyone seen this kind of problem and managed to fix the problem.  Thanks for the help.

  Alkymst

  I have a 2nd question that I'll post separately because I can't connect a computer laptop 2nd in this printer.

  Alkymst

  Google Chrome has a tendency to stick to old files, printing and print settings. To resolve this problem, you will need to change the Destination before printing of Chrome. If your print queue is configured correctly and that you can print from other programs, then open print your window chrome. On the left hand side, click on change.

  

  Once you do you will be able to modify the print queue that uses Chrome and you should be able to print your PDF documents.

  Regarding the suggestion of networking if you see guidelines referring to the activation of the web services or by entering your request on the connected HP Code then you can skip these directions. These instructions are primarily for the ePrint service.

  I hope this helps and I hope you have a great weekend!

• HP D4360 printer - alignment problem?

  My watch of the half cut letters (upper half), Headline is not yet printed on the page, a clear text than the rest of the text,

  white line crosses SOME of the lines of text, page #s top (right) not printed.

  Note: I have a new cartridge it works fine.

  Note: I had a paper jam the other day, out of paper on the other side (did not know that I should open a backdoor to do). But, I

  think I got an OK impression after that happened.  Today, printing problems. Help please!

  It's sunshyn2005 - thank you for your information. In fact, it is not a matter of color.  It was really the alignment.  I received instruction from someone on the spot - to go to start/printers-devices/preferences/services/then click the ALIGNMENT tab, which produced a sheet printed diagnostic, I then completed in the screen.  Had to re - align 3 times to get it perfect, but it worked.

  Thanks for your suggestion, the page that came on the colors and other things I have bookmark for playback if/when other problems arise.

  Thanks for your comments.

  TriciaJoy