E4200 block a URL on the WHOLE network

Similar Questions

• Site to Site VPN will not be forwarded to individual hosts, only of the whole networks

  I have a VPN site-to-site built between a Cisco 1750 router and an ASA 5555 X running 5 9.2 (4)

  There is no problem with the change sets, key exchange. However, I noticed that the ACL that is used to create the field of encryption on the SAA does not work correctly if the network on the 1750 is compared to the individual hosts on the SAA.

  Example of

  permit access-list extended access acme ip 172.25.91.64 255.255.255.224 host 192.168.10.24

  on the SAA where 192.168.10.24 is the remote host and 17.25.91.64 27 is protected behind the ASA network. If the 192.168.10.24 host tries to ping 172.25.91.70, I see the tunnel begin to form on the ASA and then fail with a message "failed policy."

  If I go the other way around, the 172.25.91.70 host to 192.168.10.24, the tunnel is built and traffic is allowed.

  If I change the ACL to use only the network address (in other words, use 192.168.10.0/24), it works in two ways.

  What happens here? If I use a group of objects instead of individual hosts directly going to work? Not sure why it's a failure.

  It depends on the implementation of the provider.

  Using the baseline IPSEC policy, the networks of each side must match. Filtering in the tunnel does not rely on the establishment of a tunnel, one can be a host or a subnet.

• open ports to prevent blocking of communicate with the firewall network

  I'm putting in place an at & t 3 g microcell to improve my cell phone home reception. He did not yet.the next step tells me toopen the following ports to prevent the firewall to block communication with the network.

  123/udp

  443/tcp

  4500/udp

  500/udp

  4500/udp

  This device connects directly to your router, so these directions mean probably you need to open these ports in your router firewall.  To help you on this subject, you will have to identify the make and model of your router.  Please do not guess; Look at the label on the device - and include any number of version mentioned on the label.

  It is also important to provide a link to the source of these directions, whereas user manualdirections to put in place the AT & T 3 G Microcell includes any discussion at all on "open ports".

  If you do not have a link but that someone has sent you an e-mail or a document with these indications, copy and paste them into your next response here, so we will have a better idea of what could be the issue.

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• Router E4200, cannot secure the wireless network

  When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »

  I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.

  When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.

  It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.

  TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.

  Do a reset factory and set up from scratch.

  If this fails, try this:

  Manually download the FW file to the local office of PCs.
  Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
  Factory reset the router once more and set up from scratch.

• 6980 HP wireless printer set up on the new network does not see printer IP URL

  I installed a new wireless router and the INVESTIGATION period on the new router is xxx.xxx.2.1 - access web URL for the printer (connected to router ethernet) is xxx.xxx.1.104 - I can't get the printer to connect to the new network IP address so I can set it up on the network.  I don't have a USB cable to the printer.  Is it possible to reset the printer so that he can put up with the new wireless router?

  Any suggestions would be helpful.

  dleew

  Hello

  I see that the IP address of the router is xxx.xxx.2.1 while the printer IP address if xxx.xxx.1.104 that are not in the same range, the printer should have an IP ending in xxx.xxx.2.xxx, proceed as follows.

  Printer has been set to an IP address manually for router previous? If so, unplug the ethernet cable select network Menu > restore default network settings and reconnect the cable.

• How to find the URL for my wireless network so I can connect my new DVD Blueray player wireless to my network?

  I am running Windows Vista Home Premium with IE 9.

  Hello

  DVD Blueray Player detects the wireless network?

  Check out the following link.

  Add a device or computer to a network

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• Blocking of URLS prefixed with-RV220W (answered)

  All WEB sites, we have an obligation to block in a given country. It is possible to use URL blocking to block all WEB sites ending in .xy where xy is the country to block. It seems that the router does not take account of the '.' and block all URLS that have xy anywhere within them.

  Thank you

  David

  * I forgot to specify the model of router - it is RV220W running latest firmware - 1.04.17

  Hi David I m glad you found this useful answer, it would be a good idea a filter such as

  * Please rate the Post so other will know when an answer has been found.

  Concerning

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.

• iFrames and blocks direct URL access to certain pages

  I've been designing a site in Muse using Widgets (iFrames) of the Composition. Because the site that I create is quite large with updates and frequent changes, I won't be publish and download the entire site, whenever I have make a change or add content (like muse seems to force me to do, even when I change a single image). So as a work, within the iFrame, I insert HTML that links to a separate "mini site" Muse in another folder in my folder root (in a manner similar to adding a blog or Twitter feed into a Widget). This way I can make changes and don't have to publish and download small pieces of the larger site. These mini-sites conducted small, contents are incomplete in regard to corporate image and layout of Web site and I don't want people to access it directly, but I DON'T want the search engines to access information in their breast.

  So how can I block a public direct URL access to the "mini-sites" without blocking the site parent to access and display them in the iFrame? I want the user to be redirected to the site parent if a picks up more search engine "mini site" content, rather than being directed to the page itself.

  I know that I won't be able to this in the Muse, using Dreamweaver or any other editor is fine. I'm not fluent HTML, PHP, CSS, or any other language, but I can muddle my way through it, if I have the direction.

  I hesitate now to present a link to the test site I've created (even if I could do it on request), so I hope I have explained myself well enough.

  Thanks for any help.

  This has nothing to do with the Muse or elsewhere in the HTML. You would have to put in place a whole bunch of rules server side to transfer users and extract content from specific referents, but in the end, there are a lot of mumbo jumbo for nothing. Search engines can pretend to be browsers browsers can pretend to be stupid to caterpillars and even obscured links can be followed in any way. You should just press F12 and cross browser debugging console. I'm afraid that it is something that you really can do it properly, using a dynamic system where you can use the ID session PHP, cookies, or personalised channels encoded in your URL. In your scenario current all you can do is to use .htaccess and robots.txt files to block search engines to dig in your records, but they still don't sign up under your main domain name and not necessarily pass. On the other hand, since the search engine still has the URL of the folder, little sleuths like me could pull off, stick it in a separate window and then apply the view of the folder for the site when possible or browse your files based on the URL in the iFrame code or their names. What you want is fundamentally mutually exclusive and goes against the work of sites HTML static how.

  Mylenium

• Buttons with the URLS of the links does not

  Well, perhaps this issue has been discussed before... just not met after the search.

  I can get the files (word, PDF documents, etc.) to open very well with published captivate files - no problem, works fine.

  However, the boxes of buttons/click to open URL not doing anything when you click it. The option to open in a new window is selected, the option to 'continue reading' is not checked. The hand cursor appears on the buttons, but when you click it, nothing comes.

  Anyone have any ideas? Is it a security issue?

  Yes.  It's usually because you've posted on a folder location on your hard drive or local network that has NOT been put in place as a location approved in your Flash Global security settings.  (Google for Flash global security)

  To avoid having to do this more than once, I usually just trust the whole D drive on my development computer (where all my current projects are found).  This way no matter where I publish on the D drive, Flash security won't be a problem.

  You do not have this problem when you download and play from a web server, only on a hard drive where you deliver not files via HTTP.

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• When I open a tab and start typing a URL in the address bar, my goal is switched to the google search field while I type.

  When I open a new tab in Firefox, usually the first thing I do is start typing a URL in the address bar to the new tab (normally that uses AutoComplete to sites that I visit a lot). The new tab usually displays a google search page which is fine. It's there if I need it.

  Lately, however, has changed the behavior of firefox when I open a new tab. After that I opened a new tab, my goal is taken from the address bar in the google search box. I mean not the Firefox search box either. I mean the search box on the google page. This occurs after I already started typing if I get the first letter or 2 of what I type in the search box, while the rest began to appear in the google search box. When I type a URL I want in the address bar. Not in the search box.

  On reflection, I think that there are a few extensions that try to block or reverse this behavior of the Google search page. If you check your extensions, are one of them suddenly disabled or missing?

  You can open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then check down to the disabled extensions.

• Cannot submit the URL from the address bar or present Google searches

  I can type a URL in the address bar, but I can't submit the URL via the Enter key or 'go' button. I have google as my home page and I can type a search but not submit them. I reinstalled FF several times. I deleted my profiles. I disabled addons. Nothing works. I am running version 20. Any ideas? It's driving me crazy. User on the computer never has this problem.

  If you are in a corporate network environment:

  20.0 Firefox has a problem with configurations where your Windows profile is stored on a server using a UNC path (for example, \\userdata\greg). Currently, there is a solution for this. A solution could be to choose a local folder for your own settings of Firefox, but that could not be authorized by your COMPUTER. Even if it's less safe, if you need emergency of Firefox, you could switch to Firefox 19.0.2. This article has a link under 'I still want downgrade': install an older version of Firefox.

  If you are in a home environment or the local settings folder, then please ignore the above.

• URL invalid the requested URL ' / ', is not valid. Reference #9.a2fc54b8.1345130184.5cbbba6

  At least once a day on my work PC Desktop I type in Yahoo.com or Amazon.com or any other popular site valid and all of a sudden, I get the error message "Security Exception" and when I select to confirm then I get:

  "Invalid URL".
  The URL requested ' / ', is not valid.

  "Reference #9.a2fc54b8.1345130184.5cbbba6.

  At that time there cannot access this site at all. So, I have to erase all history and restart my computer, at least once a day and hope it works. I scanned the support forum and I did everything what they suggest: disabled all addons (no not that I still), reset Firefox, restart in safe mode. Nothing works, it's very frustrating. She totally interrupts my work day. Help!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.

  See:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684