E5-571 and startup issues

Similar Questions

• Startup and freezing issues

  I've been running Windows 7 HomePremium on my laptop Sony Vaio E Series without any problem for over 3 years. However, recently I started to experience many problems: -.

  (1) it takes almost 10 min between the Vaio logo and login password request, at the same time appears the 'starting windows' logo
  (2) sometimes, after the "starting windows" logo disappears and the blue screen appears, the following message appears: 'configuration wondows, please don't turn off your computer', after which he says "configuration of the windows updates fail, returning to previous changes" and quickly restarts the system, after which (1) is repeated, but this time the login page is displayed.
  (3) the system suddenly stops working and the screen freezes and the only way to make it work again for Force shutdown by pressing the power button, then (1) and (2) won't happen again.
  These problems are extremely time wasting and boring. Also, I lost my progress on various documents due to the tendency of the system to freeze at random. What is the problem with my computer? I have McAfee and don't visit high-risk sites. Should what precautions I take?

  Hi Sarah,.

  Perform the steps from the link below and see if it works.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows  

  Good day!

• BSOD and startup repair

  My girlfriends laptop (I'll post it) is relatively new, October 2011, but was making BSOD and startup repair issues.
  I don't know what is happening, but I posted the Minidump to Skydrive here folder: http://sdrv.ms/S4MyUF

  Hello

  Use the methods in the convenience store posted

  Such as:

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Acer Aspire R7-571 and Pen support?

  Hello, I recently bought an Acer Aspire R7-571 and I wonder if it supports any kind of pen or stylus for the touch screen? I ask this because if that's the case I intend to buy one, but if it isn't... Well, I don't want to waste money and prefer not to buy one only to find out that it doesn't work.

  Also what leads me to believe that it may in fact take supported a pen/stylus, is to do for the parameters in under hardware and sound control panel, where it says Pen and Touch. So yes maybe a stupid question, but I figure it does not hurt to ask.

  Thank you for your time

  You can use the same pens and stylii with your Acer R7-571 as with most Android devices or iPhone/iPad: capacitive standard pens. I use with my R7-571. In General, how to identify the price will be: they should all be less than $20! (In fact, $ 2 mine!)

  R7-572 has an active digitizer under the screen, and so should be an active stylus/pen for her. They start usually from $30.

  More information here. But not much more!

• I can't send email Outlook Express (sudden problem). It is a new and sudden issue. Error number: 0x800CCC67

  Original title: I can't send email Outlook Express (sudden problem). It is a new and sudden issue.

  I use Outlook Express 6 and make this message. An unknown error has occurred. "Account: 'XTRA', server: 'smtp.xtra.co.nz', Protocol: SMTP, server response: ' 421 mta01.xtra.co.nz connection refused [222.155.136.138] ', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67.

  Continues to receive e-mails.

  Hello

  Have you made changes on the computer before this problem?

  The following article might be useful.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  Hi Jeremiah,.

  Yes, the Player update 10.1.15 is legitimate.

  In fact, we released the latest patch 10.1.16 October 13.

  You can download the same: Adobe - Acrobat: for Windows

  For immediate release notes please reference: https://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  Kind regards
  Rave

• Coding of PowerShell - path and Variable issues

  Hello, I work with a program of powershell to copy a file on my USB key and in the boot of the user file what ever is connected to this computer.

  My code is

  :
  PowerShell-command {}; $a = [environment]: UserName. $c='E:\Other\Programs\program2.bat'; $b = "C: / Users / $a/AppData/Roaming/Microsoft/Windows/Start Menu/Programs/Startup"; copy $c $b. Start-sleep 30

  It uses only the $a instead of the variable name... If I change it to "" it is said that the path is not found a cmd or an executable program. and it stops at Windows/Start

  can someone help me with this?

  For anyone who was wondering why I am using powershell-command instead of ISE is because I'm running it from a .bat file because the execution policy is set to restricted AND cannot NOT BE CHANGED.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Help a update my computer resembling windows 95 and document issues! :(

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hello

  Are you sure it is an update of Windows and not an update of HP?

  If an HP update, you will need to contact them.

  _____________________________________________________

  Do a Safe Mode if necessary system restore to prior problems.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  _____________________________________________________

  If graphics problems persist after that:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  ______________________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• I recently installed 29,0 FF and found a lot of problems with it, Noia 4 does not work, neither does Fox clocks and other issues. Have they been corrected 29.1?

  Is FF 29.1 that FF 29,0 where we users lose control of our browser and can not customize to our liking. If Yes, how do I stop the noise annoying ups tell me to install because of security issues or not I stay with 28.0 FF. Thank you people for any answer, they are much appreciated cheers.

  set the correct time zone, the date and time on your system: time.is

• Galaxy NotePro gal and zoom issues

  I try to use Firefox 27 (last) on my Samsung Galaxy NotePro (4.4.2 Kitkat). First of all, I have problems bad gal - delays when scrolling pages and pages of scrolling very slowly. Secondly, there is a problem of very bad zoom. Most of the websites I'll is zoomed and cut a lot. It's a little hard to explain. I also can't zoom out to solve the problem and define the size of the font for children does not help. I also tried Firefox Beta and the same issues are present. Things look OK on Chrome and the other integrated into the browser from Samsung.

  Everything under the hood configuration settings I can try?

  I added myself as a cc and posted a correction to the question. I hope that this can be resolved because FF is the best browser!

• Cards and rental issues with iOS 9.3.1

  So, it seems that some iPhones have been affected by the latest 9.3.1 update when using maps and location services.

  Since my update to 9.3.1 new iOS, both of my APPS of the map no longer work.

  I went to the Verizon store and they said they had 6 other customers with the same question this week come in the store, but could not help or has a solution. They said it was a problem with the new ios

  Okay, I'll be happy to take a look with you. What seems to happen?

  Well when I enter an address in MAPS or GOOGLE MAPS at random falls a PIN for my site no where close to where I really am.

  He will say that the destination is, and then all the c apps is they state "loading".

  then the cards just freeze and there is no gps in real time or the point "you are here" never moves...

  OK, so the location is never load and if so it is not updated to become precise?

  fix

  and even when I tap on the arrow to refocus or start again the directions... just it freezes or trying to load...

  and then will never give real guidance... because my original location on maps... is leagues where I'm really... or let me down in the middle of a wooded area, etc.

  Ok thank you. I know how it is important for maps working properly! I'd be keen to have fixed too.

  I completely deleted the Google maps app and reinstalled it... with no fix... same issues

  It is a problem that we've seen happen from time to time after this update. In some cases a full restore to the factory settings and then restore a backup to the phone set. Otherwise it will be a bug problem which is released with the 9.3.2 update which should hopefully will come out soon.

  also, I backed up my phone and deleted everything with a factory reset...

  always had problems even after

  even after reset and reload the iOS again... nothing works

  OK, so it seems that yours will be the one who will have to wait for the 9.3.2 update with bug fixes for the location and accuracy.

  Therefore, it does not mater if I buy another maps application? still underway to have the same problems with the gps and location?

  You can certainly try each of them have different compatibility requirements, but we found that most of these cases concern the location services on the phone itself.

  and I can't get rid of the 9.3.1 iOS version? and go back to the old version?

  If you had a backup of an earlier version, you can restore and then use the backup of the old. Just, you lose everything that you have current data.

  Hmmm... is in fact phone... like three of my friends who have an iPhone 5, iPhone 5 c and the iPhone 6 have no problem...? ! ? ! Just me...

  It is not with all phones. It has been an intermittent case so far. There is no rhyme or reason as to why some phones have had problems with the location after the update.

  Hmmm

  If no solution... and simply live with it until a new iOS comes out, and who knows how long it will be...

  I know that the update is being developed because it contains bug fixes for a few different issues. However, I'm sorry I don't have an exact date.

  Just a question - when you deleted everything for a factory restore - did restore like NEW or from a backup?

• How can I fix an installation and startup problem

  I am running Windows 7. I installed Firefox without difficulty. All other software running, including ZoneAlarm were off. When I tried to start Firefox, I got the error message "Unable to load XRE functions" and was not able to start the program. I uninstalled Firefox, restarted my computer and reinstalled the software. Had the same problem. All of the suggestions.

  This is probably caused by Zone Alarm. Please try out the instructions to disable virtualization in the next issue of support http://support.mozilla.com/en-US/questions/880170