E520 dead - 4th of 5!

Similar Questions

• My Nano 4th gen battery is dead, is this the end?

  My battery Nano 4th Gen does not load, is this the end?

  This repair guide shows how to replace the battery

  https://www.iFixit.com/Guide/iPod+nano+4th+generation+battery+replacement/1161

  For an iPod nano, the challenge is to weld.  There may be electronics independent garages in your area familiar with Apple.  Apple repair service support for older products is described in this document

  Vintage and obsolete products - Apple Support

  The room itself is available online, from the usual sources such as eBay and Amazon.

• Apple TV 4th gen junk? -The distance dead and menu in Chinese/Korean

  So I bought 64GB 4th gen Apple TV for the family as a Christmas gift.  A lot of excitement, right.  You can imagine the scene.  I followed the directions and the plug, it and pops up a menu in Chinese or Korean.  OK, I think I can work my way through it at random and change the language... but the remote does nothing.  I tried not matching and re-twinning of the remote control and I get any flashing lights on the Apple TV device.  I have reset all mutiple times and I tried a bluetooth connection with my iPhone but not the bluetooth option still appears on my phone.  Apple TV is 4th gen junk?

  Take it back to Apple for testing or from another unit.

• apple 4th gen tv does not work

  I plugged in the 4th gen apple tv and the first screen comes up with the Chinese writing and a picture of the remote control. the remote pictogram shows swiping down. e-e distance responds to nothing. It looks like this in a Chinese menu but cannot read Chinese, and nothing happens. help please

  Sounds like the menu remote synchronization and the battery being dead in the remote control.  Try reloading the remote: load your Siri remote or Apple TV Remote - Apple Support

  Note that you use the provided cable and a USB charger, or a USB port.

  Note also you can try and use the remote control that plugged while and do not need to wait three hours to fully charge.

• Dead button, mini home iPad does not

  I left my mini ipad charging for a whole day yesterday and was just dead when I arrived home (connected at about 07:30, got home around 22:00).

  I tried locking push button and the "home" button and went into account before that, my home button works well so I think that there is no guarantee that I can perform the reset in this way. The last time I had similar problem last year (the case was also dead after left load for a long time), I took to a third party service center and was functioning properly shortly after. I plugged my ipad back into power source, nor any laptop computer. Is it possible that I can try to solve this problem before coming back to the service center? Since it costs me a lot of money.

  Turn on the AssistiveTouch

  When you turn on the AssistiveTouch, you will see the AssistiveTouch menu. You can drag it to any edge of the screen, then press the menu to open it.

  There are several ways to turn on AssistiveTouch:

  • Go to settings > general > accessibility > AssistiveTouch, then turn on the AssistiveTouch.
  • Tell Siri 'Activate AssistiveTouch.'
  • Go to settings > general > accessibility > accessibility shortcut and turn onto AssistiveTouch.

  When the accessibility shortcut is enabled, you can enable AssistiveTouch on or off from any screen using Triple-click home. Simply press the Home button three times. To adjust the speed Triple-click, go to settings > general > accessibility > home-click speed.

  Replacement of the device under warranty

  If you have the opportunity to get the button replaced (by obtaining the replaced device), it would probably be the best route. It would be much easier to use a functional button only to use AssistiveTouch. If your machine was purchased less than a year before, or you bought AppleCare and the unit was purchased less than TWO years ago, it is under warranty. The warranty does not apply if the unit has been dropped or suffered from any accidental damage to the user. If the unit is not under warranty, you can see...

  AssistiveTouch allows you to control your device

  You can use AssistiveTouch to find and adjust some settings on your device as Volume, screen, lock screen rotation and more. Click on the AssistiveTouch menu and click on the parameter to be modified.

  To turn off your device, follow these steps:

  1. Open the AssistiveTouch menu and tap device.
  2. Touch and hold the lock screen until "slide to power off" appears.

  You can also use AssistiveTouch to access your home screen. Just open the menu AssistiveTouch and press Home. To use Siri, open the menu AssistiveTouch and press Siri. You won't see Siri on devices with iOS 5 or later.

  To access your Notifications, go to the AssistiveTouch menu and press Notification Center. To reach the control center, go to the AssistiveTouch menu and press Control Center. From there, you will be able to do things like turn Bluetooth on and off, use AirPlay and AirDrop, take pictures and much more

  If you have an iPod:

  http://www.Apple.com/support/iPod/service/prices/

  If you have an iPhone:

  Model	Replacement price
  iPhone 2G (original), iPhone 3G, iPhone 3GS, iPhone 4	$149
  iPhone 4S	$199
  iPhone 5, iPhone 5, iPhone 5 c	$269
  iPhone 6, iPhone 6 s	$299
  iPhone iPhone 6s, 6 Plus more	$329

  If you have an iPad:

  Model	Replacement price
  Mini iPad (1st generation)	$199
  (original) iPad, iPad 2, iPad mini 2	$249
  iPad (3rd or 4th generation), iPad mini iPad Air 3	$299
  iPad 2 Air	$379
  iPad Pro	$599

  Note that they will not replace the button, but rather the camera itself. Check your warranty here:

  https://selfsolve.Apple.com/agreementWarrantyDynamic.do
  The link above requires your serial number, which is located at the rear of some devices. If your device does not have the serial number printed on the back, you can go to settings > general > topic > serial number to find. If your unit is under warranty, the replacement will be free.

• Podcasts won't load again 4th generation iPod

  I just bought a new iPod shuffle (my 2nd generation is dead).  I am familiar with how to load podcasts, but I can't get it to load more than my first.  I have 7 unplayed episodes and 5 different podcasts.  I tried to sync to load automatically - it is said that they are all in sync and eject the iPod.  I have to eject and when I listen to only the first podcast is here!  I restored the iPod and tried to manually load and I get the same result.  Only the first podcast will load.  When I click on my iPod to see what is on it, it shows that all unplayed podcasts are loaded.  What is going on?

  4th gen shuffle works a little differently the 2nd gen shuffle.  2nd gen shuffle is a very simple device.  He keeps a list of audio that can be played in the order of the list or in a random order.  4th gen shuffle is more like 'big' iPods (but without display). It can contain several playlists, and it makes the distinction between types different audio media (music, podcasts, audio books...).

  Because it doesn't have a screen for navigation, it has a feature called VoiceOver.  In addition to the hearing of song information, you use VoiceOver to select a playlist to use.  The shuffle treats each podcast as a playlist, with the episodes responsible (for each podcast) as the elements (and the songs) on the playlist.  To listen to episodes of other podcasts, use VoiceOver to select another playlist podcast on the menu.  This document will describe how to enable and use VoiceOver on the gen shuffle 4

  iPod shuffle (4th generation): activation and use of VoiceOver - Apple Support

  Like the shuffle gen 4 can have multiple selections, you load ideally with a combination of songs and podcasts.  For example, you can a playlist of songs for the year and a "favorite songs" playlist, as well as your podcasts.  Use VoiceOver to select what you want to hear.

• 4th generation shuffle does not illuminate or fresh

  I have the 4th generation shuffle, I think that medium 15 version. All of a sudden it just stopped working. The red light turns on for 5 seconds, disappears. Accused for hours, no green. Never appears in iTunes either.

  Performed troubleshooting:

  -multi-port USB (version 3.0 and 2.0)

  -2 laptops the different, a 10 Windows, other Windows 8

  -Charger usb (.5 amp)

  -(2A) usb car charger

  With the car charger, I read a tip where you unplug, plug back in until the red light stays on instead of disappear after 5 seconds. After about 5-10 trials, it remains lit only on the car charger. But, I charged straight for well over 45 minutes and it remains red. I unplug, turn on, but nothing. Not anything clear, green. Dead.

  What could be? Worked perfectly for a long time.

  You did a good job of troubleshooting to eliminate more possibilities, except defectiveShuffle.  It is less than one year from the date of purchase, you should have your shuffle looked under warranty.

  If you have an Apple Store nearby, you can take it to the Genius Bar (tech support staff) store.  You can make a booking through the web page of the store

  https://www.Apple.com/retail/

  Otherwise, you can start here contact the official Apple customer support.

  https://www.Apple.com/support/contact/

  The problem may be a faulty USB cable, if it does not have good contact for recharging. So don't forget to take along.

• No response from my ipod don't shuffle 4th Gen, no power, no recognition of the computer

  Hi all

  I've seen several similar posts on communities, but I tried everything I could see, but could not solve my problem.

  My shuffle is not lit, it may not be recognized by my iMac when it is connected and it shows no light.

  I've tried several things:

  1. reset (several times) by turning off for 10 seconds, then on again.

  2. load via wall charger for an hour... still nothing

  3. apparently, someone said that we could plug it in and out of the charger until it has enough power to kick start something where my battery is completely discharged. I tried too much for about 5 minutes, still don't see no signs of all the lights.

  4. I tried 2 original ipod shuffle strings and 2 also bought Internet, no difference. And Yes, they are pushed inside.

  Is there anything else I can try before giving up? Mine is a little over a year, so is no longer under warranty.

  Thank you all very much

  Kind regards

  Simon

  Looks like you have tried many things.  Even if the battery is dead, you should get a reaction (like a red light) when it is connected.  It could be the USB cable, but you have tried two Apple.  The "made from the Internet" can be suspicious - they might be for the shuffle gen 2, which has a different connector and would not work with 4th gen shuffle.  You tried to load a USB power adapter, so the problem isn't a bad USB port on the Mac.

  My guess is a problem with the headphone jack on the shuffle. It does not have a power supply.  Or it could be a defect on the logic board.  If you have an Apple Store nearby, you can make an appointment with the store Genius Bar (tech support staff), even if it is out of warranty.

• iPod Nano 4th generation - battery problem

  Hello

  I have an iPod Nano 4th generation and I love it. But recently, I see that the backup battery is very poor (difficult to get 2-3 hours of continuous music playing). I went to the service center, but unfortunately, they say that there is no possibility to replace the battery or iPod, even if I'm ready for the paid service, because the warranty is void

  The only option left for me is to use it until it works (until the battery is completely dead) and then throw it away. Y at - it any other option left, I'm not aware of.

  Kind regards

  Girish

  If you do a search on the Internet for the independent repair companies in your area, you can find one knowing well Apple that will make the replacement of the battery.  In this case, the technician didn't need to be "certified" officially by Apple because it is not a warranty repair.  Technology needs of having an experience.

  You can do it yourself, if you are technically inclined.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Nano_4th_Generation

  and third spare batteries are available on eBay and other online sellers.

• Why is apple tv (4th Gen) using subnet different comcast

  I need to figure out if there is anything special/different regaurding how ATV (4th Gen) made the resolution DNS when wired to a Comcast cable modem only (no wifi and no router)?  I notice that my ATV selects a different subnet when ATV is set automatically resolve IP and DNS.  Example of my Dell PC Tower and Sony laptop automatically use a subnet of 255.255.255.0, but ATV uses the example below:

  67.166.208.26

  255.255.252.0

  router 67.166.208.1

  ATV works great just need to know why to solve network problems not related to my home office network and at home?

  Hello. You say there is no router, but I guess that the Comcast modem is also a router and DHCP server. Are you using IPv6? You use a static IP address?

• My iPhone is dead

  My iPhone is dead. Without doing anything from one moment to another, I was not able to put it on more. Any ideas what I can do about it?

  Try the procedure described here: If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Can I charge my iPod Shuffle 4th Gen with a wall charger or do I need to use a computer?

  Can I charge my iPod Shuffle 4th Gen with a wall charger or do I need to use a computer?

  You can use a wall charger. The following, for example, shows in the section compatibility as being compatible with the iPod Shuffle 4th generation: http://www.apple.com/shop/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=0a8 96cef6682809aaf80e8c3741f09ed6d7df9585e7fc21bb39381e2a99a7f56b6f149e5ab72d8416a9 bfa670e36cc43168558b8b8c033b881948c1230b7156cbe51af44f7fd2b9ab533d7cb453e844ccd1 80b8e71aa7359ff2698b40de39b3b

  The foregoing generally comes with iPhones, but if you have a charger which comes with an iPad, which can also be used with the Shuffle: http://www.apple.com/shop/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=0a 896cef6682809aaf80e8c3741f09ed6d7df9585e7fc21bb39381e2a99a7f56b6f149e5ab72d8416a 9bfa670e36cc43168558b8b8c033b881948c1230b7156cbe51af44f7fd2b9ab533d7cb453e844ccd 180b8e71aa7359ff2698b40de39b3b

• 4th gen Apple TV cannot pair with iphone remote app

  Click on 'Add Apple TV' selected on TV, then was invited to enter the 4 numbers matching password shown on television. However the TV shows 4 blocks of gray rectangle instead of 4 digits.

  I also checked that the apple TV and iphone are on the last OS update. What gives? This app is supposed to work with 4th gen now.

  Yes, it works. This looks like some weird glitch. Using the new application ATV 4 remote control (black), or the older version, now called iTunes remotely? Try restarting the ATV using the settings > system > restart. Then try to pair it again.

• iOS 10.0.2 temporarily brick iPad 4th generation

  My IPad 4th generation has been temporarily briquée by iOS 10.0.2. Be it finally resolved itself, but I still have questions like a shift of keystrokes and on my home screen. Any suggestions?

  What do you mean it "brick". Exactly what happened, and how did it resolve? What did you see on the screen, and you haven't tried the OTA, or with iTunes update? Since then, what did you do to try to resolve this discrepancy you describe?

• How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  How to authenticate a network open on 4th generation Apple TV? Or pull up a web browser?

  If you need assistance with a Wi Fi connection = > get help with Wi-Fi on your Apple TV - networks Support Apple