[E530] GPU NVidia not detected after installing Windows 10

Similar Questions

• WIFI device not detected after installing Windows updates.

  Original title: WiFi stops working when loading Windows (Win7).

  After that the last series of Win7 update is more my Wi - Fi works.

  My computer is the only one in the affected House. Wi - Fi is on (the radio light is on) when you start up loads of Windows, and then he went. More my factory installed Atheros wireless network card is no longer visible in the device, only the Ju Fast Ethenet controller Marvell Manager. I have re-installed the Atheros driver in the hope that the system would then find the device. No luck. Even the F8 key is operable, so using the FN + F8 key to activate the Wi - Fi is a bust.

  We know that the camera is good, but Windows doesn't see a reason any. This seems to be a matter of Win7 and not a hardware problem.

  • Please let know us if there is a FIX to this problem - I spent the last 4 days of research on this and I'm not alone.
  • I can re - install Win7 or y at - it a patch that I can use? With the help of a cable Ethernet is well when you're used to a Wi - Fi connection!

  & Devices:

  Toshiba Satellite P305D-S8818

  Atheros AR5BXB63

  Hi CDanahy,

  1. What are the updates recently installed?

  How to find the number of update:

  a. click Start, type windows update and press enter

  (b) in the left pane, click view update history and find the updates recently installed.

  2. are there any yellow listed under network adapters, Device Managerexclamation?

  To check:

  a. click Start, type devmgmt.msc and press enter

  b. expand the network adapters and make sure that the exclamation points.

  Method 1: Run the Microsoft fixit

  See the following site:

  Hardware devices do not work or are not detected in Windows

  http://support.microsoft.com/mats/hardware_device_problems/en-us.

  Method 2: Disable any security software

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I would say as you to see the site mentioned below:

  How can I troubleshoot network card?

  http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems.

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Sony VAIO VPCJ111FX touchscreen not detected after installed Windows 8.1 (clean)

  I had to install the new hard drive in my Vaio, needless to say due install the new OS... Figured since it's touchscreen Windows 8.1 would be the way to go.  Yes, well now a my touch screen does NOT work!  What is the problem with that?

  Sony VAIO VPCJ111FX

  8.1 Windows x 64-bit

  500 GB HDD SATA/7200 RPM/MIN/32 MB cache

  p. s.

  YES, it IS a touch screen!

  Hi DCwell1977, while they inspected the drivers of this model, it seems that this unit doesn't have drivers available for Windows 8.1. You can also visit this link and check the compatibility of this model to Windows 8.1. It's not necessarily you cannot upgrade to Windows 8.1, but we cannot guarantee that all the features of this unit will work.

  If my post answered your question, please mark it as "accept as a Solution.

  bit.LY/LapMagWin

• External hard drives and USB not detected after installing windows 7

  Original title: does not display the hard drives laptops, but do sticks

  for some reason any lately
  any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
  some show in computer management, some don't
  I've updated the mb drivers
  trying to not format to fix this little problem
  ideas?

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3 have you tried plugging the laptop hard drive on different USB ports?

  I would suggest trying the following steps and check.

  Method 1:

  Run the utility of Windows troubleshooting for hardware and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Check if it helps.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Does not fingerprint after installing Windows 7

  I bought 3 items of T500 with installed Windows 7 Home. With this OS footprint scaner worked properly.

  After installing Windows 7 Professinal, fingerprint reader does not work. All instaled divers. There is no error in DeviceManager. But when I run the software of fingerprints, it is said that scanner is not lit.

  Make sure that the installed driver is actually the one that came with the Lenovo Fingerprint Software and not the one that you got from Windows Update. I've seen similar problems several times where Windows 7 is installed and get fingerprints from windows update driver/software and the software Lenovo to fingerprints do not work because some parts of the software, I got from windowsupdate is left on the computer.

  Which version of the driver of the fingerprint reading is installed on your computer?

  You can try uninstalling Lenovo Fingerprint Software and restart. Then, after the reboot if there is still a driver installed for the fingerprint reader in Device Manager, right click and select uninstall and also check the box that says to delete the driver. You may have to restart again. If you had several drivers fingerprint installed you may need to repeat this step twice. So when Device Manager shows the fingerprint with no check reader driver installed if you have any software fingerprint authentec or authentec truesuite installed under "uninstall or change a program". If you find any uninstall and restart. If you can successfully eliminate all the reader of fingerprints in the device should be listed in Control Panel with no driver installed, you should find any substance of fingerprints or biometrics. Then try to install the Lenovo Fingerprint Software.

  -gan

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• OSXRESERVED do not deleted after installing Windows with Bootcamp

  I installed Windows 8.1 and upgrade to Windows using Boot Camp 10.

  I think that the normal procedure for installation (instructions Apple) should be:

  -Boot Camp will partition the original HDD system to:

  -Partition OS x 'reduced '.

  -OSXRESERVED partition to save all the installation Windows 8.1 or CD ISO.

  -TRAINING camp of hard drive where the final installation of Windows will be.

  -Once installation is complete (it took about 5 hours!) so it should be reconfigured by boot camp would exist only two partitions:

  -Partition OS x 'reduced '.

  -BOOTCAMP with Windows OS HARD drive.

  But I still 3 partittions in my MAC PRO END of 2013: OSX, OSXRESERVED and BOOTCAMP.

  So now, when I boot my MAC PRO instead of see 2 possibilities of OS (OS x and WINDOWS) I see three possibilities (OSX, WINDOWS, and WINDOWS again), and the third possibility is wrong, it will show the original installation Boot CDROM instead of Windows 8.1

  I hope that I have explained clearly (...).

  Second part of the problem: I want to use VMWARE FUSION and configure it to use the Bootcamp partition as a virtual machine (YES, with the MERGER it is possible to use as virtual bootcamp, then you can start your Machine Windows within the MAC, or boot from the beginning). The problem is that the MERGER will detect the OSXRESERVED partition, but not the BOOTCAMP partition... So I can't get it to work until I have the first problem...

  Would you please be so kind as to help (I would like someone to really expert Apple could give a solution).

  Best regards

  Francesc

  1. you can remove OSXRESERVED manually using disk utility.

  2 VMWare seems unable to distinguish between the installer and install BC. Once you delete OSXRESERVED, it should work fine.

• Satellite P300 - Microphone is not working after installing Windows 7

  Hello

  I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
  I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

  Thank you
  James

  Hello

  Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, it should be possible to use the internal mic.

  By the way: internal what application you are using for the microphone? Skype or something?

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.