E709 has or n?

Similar Questions

• 2 of the 3 computers suddenly can't print on network 6500 e709

  I have three computers and domestic an OfficeJet 6500 e709 on my local network.  Everything worked well for several months until today.  Today, cannot print my two Win7 machines, but my Vista machine can still.

  I went through the center of Solution any sequence of troubleshooting and nothing fixed it.  So I tried my own diagnosis, as follows.

  Because apparently, this forum does not accept attachments, I refer you to the numbered screenshots I posted to http://winter.webfactional.com/HP-problem.doc

  1. printing of each application, I tried, I get "unable to print document."  Most said that the center of Solution is that it is due to "a mistake in the printing system."

  2. starting at the HP Toolbox on the same computer, print a test page.  This method works.  It turns out that there is a connection between the computer and the printer.  The printed test page shows "network status: Ready ', and everything else in the report seems normal.

  3. I go to the window of the printer for this printer, cancel printing failed, view the Properties window and click on "Print Test Page"...

  4.. .and see it immediately.  However, nothing comes of the printer and as little seconds later...

  5... .my screen looks like this.

  ~ Thanks in advance for your help

  ~ Ken

  Thanks, MusicMan ~.

  It happens that my two computers are print again with success.  I don't quite know what solves the problem, and I have no idea why the problem arose in the first place, after a few years a print without problem with this Setup.

  For whatever light it can cast for others (and for me if it happens again), here's the rest of the story:

  After exhausting all the troubleshooting procedures that I could find (including flashes of heat-queue and reboot), I posted my call for help here, turned off my computer and went to bed.  The next day, after having turned all back on again, I noticed that a printer test page appeared in my output tray on the printer, and that he had been sent to one of my computers previously defective, I'll call the "desktop".  As stated in my initial post, printing a test page had been impossible before.  Then, I checked the office by printing a document.  That worked well, and the Office has worked since.

  Then I checked my other computer, the "laptop", and unfortunately it still couldn't print.  Looking for differences between the two configurations, I noticed that the center of complete Solution has been installed on the desktop but not on laptop - laptop has had only the drivers.  So I took to install the Solution Center.  Long story short, the installation process is not well, when the printer is already recognized by Windows and the drivers are already there.  So I finished unistalling the printer and then installed solutions and here Center on the laptop very well printed.

  I hope this helps.

• Install HP 6500 E709 problems

  I installed my new HP 6500 E709 without problems on my laptop. Can I wireless connect and print without problem. I am now trying to install the software on my desktop, so I can use it to print to the same wireless printer. I keep getting installation errors. Here's my set-up.

  The laptop is running Vista and when I installed the printer I did as a wireless and connected the USB installation when you are prompted. As I said it works fine.

  The desktop computer running Windows XP and is wired connected via a cable to my wireless router. When I try to install on the desktop I choose wireless installation (which can be a mistake, but I want to use wireless) starts the installation he actually finds my printer during installation and asks me to click on the printer, if I want to install this one and I don't choose it. As the installation progresses he says he can't see my printer and ask me to be sure to unblock TCP 9500 and 9290 TCP ports and try again or continue to install and connect later. I chose to connect later and continue. I then get all kinds of fatal errors more away in the installation and he guides me in the recovery process and sends me an error report. The report basically just said everything restart and try again, or try to reload the software. What I did twice.

  Although the installation says to open the ports. Can I connect the printer to the desktop computer by typing in the IP 192.168.1.3 addess and communicate perfectly with the printer (from the desktop). I also run a test ping from the office. (run, cmd, ping 192.168.1.3 - t) and it works very well with 0% packet loss. So I do not understand why it is said that he can not communicate during installation.

  If anyone has any idea what is the problem? I am doing a wired USB installation? (I don't want to ruin the connection to the laptop's wireless and will not be wired desktop.)

  Any help would be appreciated.

  Thank you

  PrintDoc thanks for the advice. I have solved this problem by downloading the latest drivers and a different approach. Although I have always received the communication error that said that he did not see my printer. (even if it was and I could access it by typing the IP address) this time the installation I chose the "ignore the error and continue" instead of "continue and I'll fix it later."  Don't know what the problem was but installation continued without error this time and I was able to print correctly. I hope it helps someone else. Thanks again.

• Cannot get duplex printing to work on HP 6500 has.

  Windows 7 64-bit.  At worked initially, but not since. Only one option in the two-sided printing options is manual Duplex. Can you help me?

  Thanks for the additional info.

  Prior to what I have below, are others who use the same duplex capable device?

  If they can't, it may that the device does not recognize the duplex unit.  If they can, it seems isolated to your system.

  I have been looking to try to find, and easy way to get the version of the driver you have installed.  I can't find.  There is a possibility that remove and then reinstall the driver, did not leave the driver in an ok. State.

  One thing you could try is once again uninstall and download the latest version of the driver from HP.

  Remove all the SW using Add Remove programs.

  The way I was told to remove completely the Win7 driver: (other operating systems are similar)

  In devices and printers, right click on the printer and select remove device.

  Then open Notepad. and do file-> Print

  Then right click on the box to select Printer printers on white space.

  You get a different set of options, select Server properties.

  Click on the driver tab

  Select the OfficeJet 6500 driver and then click Delete.

  Select remove driver and Driver Package, and then click OK.  Click Yes, you really want to do this.  You will probably get another window with a button Delete.  Click on delete and other pop-up, click OK.

  Reboot your system.

  Also, I came across this method to remove a company OfficeJet driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-97861-1&cc=us&DLC=en&LC=en&OS=4063&product=3795314&sw_lang=

  At this point, you can download and reinstall the driver.  The driver for the 6500 (E709) and a 6500 (E710) do not seem to be the same driver.   I would like to check from your screenshot said 6500 (E709), but the station yelled the 6500 has.

  It really feels at this point as a driver install error and while installs it the driver has not been able to determine that a duplexer has been installed.

  At this point, the only other option rather than using the latest version of the driver is to see if you can locate the original disc supplied with the printer.  If you can install using this drive after your have deleted the driver as described above.

• AutoCorrect has learned the word that breaks down when it is typed iOS 10

  I've been using iOS for more than five years, it seems that my library for automatic correction has become corrupted at least for a specific name entry 'Toni smith' I

  Whenever I type the employees name AutoCorrect changes this name string to something that freezes the iOS and iPad all crashes recently I turned off auto correct - dictionary - predictive parameters and it is solved.

  ID like to use once again, AutoCorrect is their way to change a setting in the scholarly dictionary?

  At first, I thought it was just a keyboard problem, but then I went to the dictation and every time at the end of the dictation. Once again the crashes of iOS it happened in Facebook, ios e-mail and enamel with frozen then similar results to crash.

  How to reset my dictionaries through all my idevices. Happening now on ipad and iphone

  Settings > general > reset > reset the keyboard dictionary

• System preferences icon has replaced the dock

  Hi all

  I have a strange behavior with the dock in macOS Sierra, especially with the "System Preferences" icon After you open the system preferences application, the icon was his suddenly replaced by another icon (see image below). It looks like a Doc App icon?

  

  I tried to remove the 'System Preferences' app to the dock and put new in. It's OK for a while, but something after a few hours or days, the icon has been replaced by the "Doc App" icon again? !!

  Is there anyone who has this strange behavior?

  Thank you

  Torp

  See this possible solution: Re: app icons disappeared from the dock

• My i pod classic has no summer when option in I tunes 12.5

  My I pod classic has no summer when option in i tunes 12.5.  I want to manage my iPod

  Launch iTunes and connect the iPod.  The iPod is displayed as a button on the device, close to upper left corner of the iTunes window.  This screenshot of my iTunes appears iPod device button, circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of this screen, in the sidebar, in setting, click the iTunes (like the music) media type to set up automatic synchronization for this type of media to iTunes.

  So if you are more familiar with the "tabs" to set up the iPod, who went in the upper part of the window of iTunes Plus, it works the same way, except that the features are now in the sidebar on the left side.

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• How to unlock my iphone 5, because my contract has expired?

  How to unlock my iphone5 because my contract has expired? Thank you.

  Hey nebo700,

  Thanks for posting your question in the Community Support from Apple! I understand you want to unlock your iPhone for use with another carrier. I can certainly understand wanting to be able to use the carrier of your choice, and I am happy to share information.

  You will be able to find all the information on how to unlock your iPhone here: How to unlock your iPhone

  See you soon!

• can I still add to apple care if the warranty has expired?

  can I still add to apple care if the warranty has expired?

  No, if it is out of warranty, if it is for a Mac: http://www.apple.com/support/products/mac.html

  The AppleCare Protection Plan can be purchased as long as your Mac is still covered by the limited warranty of one year.

• Sierra update once the photos has been repaired all of my albums have been removed, videos and all album

  After the update of Sierra once the photos has been repaired all of my albums have been removed from my album of videos from photo library and all, only defalt albums that are there are people, last imported and my photo stream.

  If the videos, Burst, Slow Mo, time, selfies are all gone?

  Please help someone

  Videos are, Burst, Slow Mo, time, selfies albums in the missing sidebar or the content of these missing albums?

  You have a copy backup of the library made just before your Sierra improvement?

  

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Sierra downloaded but has not installed

  When I check for a software update, my shows (end 2013) MacBook Pro that Sierra has downloaded but won't let me install it.  What should I do?  TIA

  What happens when you try to install the Sierra?

  The best way to find its setup application must use Launchpad: the basics of the Mac: Launchpad is the quick way to find and open your applications - Apple Support.

  Describe all messages that appear, as appropriate.

• iPhone 5 (iOS 10.0.2) with iTunes (12.5.1), sync has failed to start.

  Hello, yesterday I bought an iPhone 5 with iOS 10.0.2 and while I am trying to sync it with iTunes 12.5.1, an error saying that: "I phone cannot synchronize because sync could not be started."

  So far, I tried to re - open iTunes and try new but no luck, I also deleted the last device back upwards (as it has been mentioned as a solution on a forum), but didn't work. I also tried to do it after I closed all the applications on my phone and restart it but no luck. Any suggestions? Thank you in advance!

  Hello

  In addition to restart iTunes, try a reboot of the strength of your iPhone: restart your iPhone, iPad or iPod touch - Apple Support