Similar Questions

• How to configure a port as the port of the server

  I'm new to UCSM,

  What are the steps for configuring a port in the ports of the server.

  Step 1 in the Navigation pane, click the Hardware tab.
  Step 2 tab in the equipment, develop interconnections > Fabric_Interconnect_Name > Module fixed >
  Unconfigured ports.
  Step 3, click on one or more ports under the Unconfigured Ports node.
  Step 4 slide the selected ports and drop them in the Ports of the server node.
  The ports are configured as server ports, removed from the list of ports configured and added to
  the Ports of the server node.

• How to configure multiple clusters on the same machine.

  I'm trying to configure multiple clusters on the same set of machines. I put the name of the cluster and multiple cases IP addresses different for each cluster. However I am still in train and error stating:
  "This indicates that there are multiple clusters on this network, try to use network configurations that overlap.
  
  Isn't this possible? If it is possible, is it still possible that I need to tell the virtual machines that they belong to different groups?
  
  Thank you
  Jacob

  I put these lines in my script for starting a prod. For dev I REM out as below.

  REM set java_opts = % java_opts %-Dtangosol.coherence.clusteraddress=224.0.0.1
  REM set java_opts = % java_opts %-Dtangosol.coherence.clusterport=65432

  Andrew

• How to configure the port to connect the SG300 switch to 3com switch

  Hello

  I need help. I have my network with multiple switches SG300.

  I have one of them as my base switch working mode layer 3. With 2 VLANS and vlan interfaces to each vlan.

  Everything works ok.

  But now I need to plug a 3com unmanage switch who welcomed of vlan 1 and 2. How can I connect this switch to my Cisco sg300 switch? Which mode to use in this port?

  Thank you very much.

  SG300 Switch L3

  I have

  I have

  SG300 L2 switch

  I have

  I have<-------- how="" should="" i="" configure="" this="" connection="" to="" support="" all="">

  I have

  3Com unmanage switch

  I          I

  I          I

  I have vlan 1

  VLAN2

  Use of VLAN based on MAC on SG300 L2 switch, record all customers on the required VLANs (or better configure port SG300 L2 to 3com in VLAN PVID with maximum and other clients in the VLAN based on MAC).

• How to configure multiple instances in CF9

  I'm having some problems with a couple of our intermediate servers that run multiple instances of CF9, and I do not know if they are properly configured. I have installed CF9 Enterprise multiserver and I created 4 additional instances by using the Instance Manager. I also created a virtual machine for each of them to use specific Java and re-recorded each service in order to use the custom Java virtual machine. In Apache, I added the following for each virtual server (by changing the serverstore and the port):

  < IfModule mod_jrun22.c >

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/muffin/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  < / IfModule >

  However, when the service is stopped for one of the sites, rather than get the JRun error 500 but it will return a CF error or the site will still ride. But if I stop the backend CF service he will kill all the sites.

  It seems therefore that all instances are still tied to the main service. Y at - it something that has not been configured correctly or something I'm missing here?

  I used this guide during the installation in place all the http://help.Adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc4 .html

  Thanks for any help.

  Most of the time, everything seems as it should work.

  My jrunserver.store files all say the same thing as yours.

  Did you do a restart on Apache and CF just to make sure things are picked up correctly?

  A number of things you can try, but I don't know if it will make a difference or not.

  In each of your virtual servers, remove the

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  And just do:

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  Also add in "JRunConfig Apialloc false" to each of them. This will allow the stub to take memory from the operating system instead of Apache which is supposed to be safer.

  Let me know if any of these help not at all.

• How to configure multiple monitors?

  original title: multiple monitors

  I tried to connect to an external monitor and now I see nothing

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/multiple-monitors/49298562-315d-E011-8dfc-68b599b31bf5

• How to configure rdm to use iscsi lun in a virtual machine using ms iscsi initiator?

  I have equallogic SAN attached to a cisco 3750

  switch. It comes to our storage network.

  Within the virtual machine for all readers of data other than my c:\ that has the operating system I would use iscsi data switch that has 4 network ports on four different nic cards already assigned.

  According to what I read a virtual machine can use only 4 nic so I have a Production network the other three that I would

  Use it for iSCSI data.

  Three ports of each virtual computer network for using ms iscsi with MPIO

  initiator.

  I have already attached the RDM using esxi 3.5 as a physical mapping of RDM.

  My question is how to configure the ports of the network adapter in the virtual machine?

  The VM network is on 172.19.2. * where iscsi is on 172.19.21. *.

  What would be the entrance on the network adapters in the virtual machine that is running ms win 2 k 3 r2 x 64.

  Thank you.

  ESX / Configuration / networking

  Propertties (near vSwtich3).

  On vSwitch object / change

  NIC Teaming tab.

  Menu of load balancing.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• How to configure ESS to the multiple proxy weblogic administration console

  Hello

  We use a 11.1.1.7 OSH and OAM webgate 11g and 11.1.2.

  To bring two weblogic server admin console in Kingdom of Single Sign-on.

  
  Please let us know how to configure ESS to the multiple proxy console weblogic.

  Thank you

  Stern John

  Activate the configuration of the virtual server on OSH and assign each administration console to another virtual server.

• How to configure DiffServ on PC6200

  Hello

  I need to configure DiffServ on a switch of PC6248 and PC5548. Can you provide an example config coomands creating 2 classes. 1 video and 1 data and assign it at the end of the ports of the device.

  Also how to configure ports trunk with classes? It is even necessary?

  Thank you

  To use DiffServ QoS, we must first define their criteria and categories:

  1. class: create classes and define criteria of class

  2. political: create strategies, associate political classes and define policy statements

  3. service: Add a policy to an incoming interface

  Packets are classified and treatment on the basis of criteria defined. The classification criteria is defined by a

  class. The treatment is defined by the attributes of a font. Policy attributes can be defined on a per class

  each instance and it is these attributes that are applied when a match occurs. A policy can contain

  multiple classes. When the policy is active, the measures taken dependent on the class that matches the package.

  Package treatment begins by checking the class for a packet matching criteria. A policy is applied to a package

  When a class is within this policy is found.

  The Differentiated Services menu page contains

  If you had a video on VLAN 22 and wanted to assign a specific preference and assign it to port 1. Orders should look like this.

  class-map correspondence test22 ipv4

  game of vlan 22

  output

  Policy-map test23 in

  class test22

  Assign-queue 4

  output

  interface ethernet 1/g1

  service-policy in test23

  There are several different match criteria that can be used. The user and CLI guides describe the available options.

  http://www.Dell.com/support/manuals/us/en/19/product/PowerConnect-6224

  Hope this helps

• How the Virtual Machine port group communication?

  How the Virtual Machine port group communication?

  Port group is virtual aggregation of ports on vSwitch. A vSwitch can have multiple Port groups which separate the different network traffic. Port groups communicate with vSwitch, and we have physical network maps on vSwitch which establish communication with the external network. We can configure security, NIC teaming, traffic shapping nework political and at the level of the port groups. Once the port group is created, we can assign to vNIC

  How to establish communication?

  Public network > Switch L3 Core > ESXi physical adapter > vSwitch > groups > virtual NIC > Virtual Machine

  Virtual machine connect to the physical map using vNIC coming on Port groups. This is how it works.

• How to configure Firefox 4.01 to save all tabs when closing the browser?

  In the previous version 3.x.y to Firefox, when I closed the browser, he asked me if I wanted to save my open pages / tablets before closing. When I open the browser again, then it rebooted all previously open tabs / pages. In the version 4.01, before avant de fermer close the browser warns me that I'm closing multiple tabs, but when I restart the browser once again, it does not load the already open tabs. How to configure the browser to behave like the old version of 3.x.y, that is perfectly save all open tabs and load these new opening to restart the browser?

  Firefox stores now always the old session, and you can access it by going to the history menu and selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?

  I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?

  Hello

  1. what happens when you connect the joy stick?

  2. do you get an error message?

  3. what version of Windows are you using?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Flight Simulator x: using a gamepad

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624

  Step 2:
  Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.

  (a) connect the joystick to the USB port via the adapter.

  (b) see if it is detected.

  (c) Windows should recognize the new hardware and set in place to work properly.

  If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.

  Step 3:

  I suggest the following steps and check for the device.

  1. in Control Panel, open game controllers. To do this, use one of the following methods:

  a. click Start, typejoy.cpl in the Search box and press ENTER.

  2. click on your game controller, and then click Properties.

  3. on the Test tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  I hope this helps.