EA60-155 tohiba energy saver

Similar Questions

• P50-A-144 satellite: the option 'never' is ignored by the energy save plan?

  Windows Home Version 1607 (Build 14393.187) 10.

  Hello

  all the options of setting energy save plan are set to 'never '.
  "Turn off screen" and "Modus after saving", "Battery" und "AC Adapter"
  But if I read a Document in Word or a Web page in Internet Explorer
  After some time of inactivity with the mouse, for example, the screen will be closed
  then the laptop energy saving modus.

  It seems that this started probably occur after the recent Windows Update Version 1511 to 1607.
  I've seen available for this model Toshiba drivers, but these are the same since the year 2015
  which I have already installed after Windows 8.1 migration to Windows Version 1511 10.

  Could you please help me?.
  Thank you.

  Additional information: it seems that if a user program is running (for example MS Word or Internet browser) and the computer remains on the desktop screen, the screen will be turned off and the laptop DO NOT go to energy saving modus, as expected, because the settings are set to 'never '.
  This means that the parameters of energy save plan are ignored if a user program is running, and there is no user activity, for example: the user don't move the mouse during playback of a document in the MS Word program.

• Sound problems and the modem EA60-155

  3 weeks ago I received my laptop EA60-155 and have experienced ongoing problems with the sound and modem on the laptop. I bought the laptop from currys so am sure that they are an authorized dealer.

  The problem is different, sometimes I turn on the laptop to find out, there is no sond and the modem does not work, sometimes the sound works and makes the modem for about 15 minutes before the problem arises again. I bought the machine to the dealer authorized to Bahrain twice now, twice they said them that the problem was resolved when he doesn't. I called the center of appeal twice, but I still have the problem. Any advice would be greatly appretiated.

  Hello

  If you have this problem permanently, you can try to reinstall the modem and sound card. If the unit is pre-installed with recovery DVDs, it should work fine. As a first step, you can try and remove the sound card and the modem from Device Manager, then restart the device. The two hardware components must be recognized and installed again.

  If there is no success I recommend you backup your data and reinstall the OS using recovery DVDs. On this way the unit will be clean installed and there should not be any problem. Every problem that happens after that can be some hardware malfunction and you must contact the Service partner again.

  Good luck!

• I don't have the energy saver for my laptop

  I need help!
  I don't have the energy saver for my laptop.
  I have power options regular when I plugged it, but it is dimmed. When I click on the Console of the Toshiba power management, nothing happens. It is not in Add/Rem
  I must have deleted it by mistake.
  Is there a way to get the power management and power of return Options?

  Thank you!

  Hello

  Well, normally you should find on your CD of tools & utilities delivered horsepower
  If you want you can also see the Toshiba driver download page.
  The other possibility is to use the Windows System Restore tool.
  This tool restores the system window to the start time.
  Energy saving needs to be replaced again.

• Toshiba Tecra S1 energy saver - cannot install

  Hello!

  I formatted my laptop a toshiba tecra s1 and installed win xp pro sp2 without the oem CD! I installed xp from my own licensed version of my school, it's a full version, not oem. now, I tried to install the toshiba power saver, but when I run the Setup, an error occurs: "driver not found!" This configuration will be terminated! ». someone told me that there is some time, I have to install first the Toshiba ACPI common Modules for Windows XP, after installing common tools, I'll be able to install energy-saving. My problem now is that I don't think the Toshiba ACPI common Modules for Windows XP for my tecra s1. I find the tools for all other portable Toshiba, but not for my s1.

  can you help me, I need the energy saver because I don't want that my cpu work fullspeed always :(

  thx for your help, sandass

  Post edited by: sandass

  Post edited by: sandass

  Hello

  First of all, you need to install the Chipset utility. Follow this link.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=it

  Once empty it first developed for laptop. Then Tecra. Tecra S series, then S1. Then XP operating system. Then click on search. Once this happens find the chipset utility and install it. Then, you can install any other drivers you need well enough in any order you want. But you must first install the Chipset utility. I hope this helps you and solve you this problem. Good day!

• Satellite M30: Options after replacing the motherboard's missing energy saver

  Hi all

  I just got my laptop back from the service center, and not surprisingly, they've pushed a device that existed!

  I had my laptop (M30 1.7 GHz special edition) for the centre of repair for a defect and they informed me that the motherboard had to be replaced. I got the laptop back a couple of days and I immediately noticed the laptop is overheating, fan has not turned too often that he was setting the profile to "Full Power".

  After hours of investigation, I noticed that a few options that existed in the Toshiba Power Saver no longer exists. So, in my opinion, that my laptop is running as optimized battery even if it is set to full power.

  As I said, the fan is not put on too often, leading to the laptop is overheating. Then the fan used to be almost constantly on full power before the replacement of the motherboard.

  Here's how the energy saver used to look like 'before' to take the laptop to the repair center:
  http://www.FoxPop.com/Imre/2006/toshibatecram3review/toshibapowersaver1.gif

  And here is how the energy saver looks now, after the replacement of the motherboard:
  http://www.iXBT.com/portopc/Toshiba-Satellite/power.PNG
  with maximum processing speed of the CPU to 3 instead of 4.

  Note how I'm now lack the "CPU control method" option, and I cannot adjust the speed of treatment to more than level 3!

  Cooling method does not appear the maximum performance for me either, because of the symptoms I mentioned above.

  Any idea on why that might happen? Please note that I used the recovery CD system and everything back to factory settings, still no luck. I'm sick and tired of going back to their ugly repair center. If someone can point out the problem, I'll be very grateful.

  P.S. I use version 7 of the energy saver, verion BIOS 1.4 (original)

  Thanks in advance.

  Hello

  I wonder why you did not contact the service guy again.
  After the repair everything it works fine and if the laptop is not working properly, you should immediately report it! I think it s a claim.

  However, to my knowledge after the replacement of the motherboard that the micro code to the Board of Directors must be updated with the CPU could perform specific performance.
  What CPU speed appears in the windows system?

  I m not 100% sure if the microcode update missing is responsible for your problem, but I recommend asking to view ASP.

• Impossible to install the new OS energy saver

  Hello

  I have problems with Toshiba Power Saver.
  I bought my laptop in Austria with windows German. But I installed the English version and it came the problem. Everything worked except 2 utilities. I tried to install from the recovery CD, but they does not work.

  So I installed Toshiba power saver, but it did not run. When I click on Control Panel and Toshiba power saver comes the message:
  "Cannot be opened because you do not have access rights to run Toshiba Power Saver" I am logged on as administrator.

  So, I don't know. I tried to download on the internet, but the problem remains. In XP media center edition German, everything works, but in my XP with SP2 not.

  Hi Raymon

  In my opinion you should post at first what model of laptop, you have exactly.

  In any case, for the installation of simple tools and utilities not use CD recovery given the image of the installations. For utilities or simple tools, you can use the Tools & Utilities CD or download it from the download page.

  If I understand your ad directly the energy saver is preinstalled on your device, but you can't use it. Because of this, you should not attempt to go back. Please do not forget that you logged in as an administrator and not a user with limited permissions.

  I tested it on my device and only if I am logged in as a limited user can't launch energy-saving. As an administrator, I can do what I want.

• EA60-155: display brightness adjustment does not

  I have a laptop Equium EA60-155, and recently, the Fn + F5 and Fn + F6 keys do not work.
  I looked into the different 'tools' installed and checked the user manual, but have been unable to find a solution.
  Any help would be appreciated...

  Hello

  Have you changed anything for example new OS or SP2?
  As far as I know you use the hotkey utility
  Hotkey utilities for display V1.00.08SA devices
  Please also see the installation instructions that are placed on the Web site

  Concerning

• Set up a wireless network on EA60-155

  I have laptop EA60-155 A60.
  I have trouble to set up a wireless network between my desktop and my laptop.
  My office works well online via a network of 576 Thompson router. I use a BT Voyager 1060 portable card in my laptop, but the two will not connect. Can anyone help?

  Hello

  as a first step, he must set up a connection between the laptop and the router. Now, the two computers are in the same network. They can see each other in Solution Explorer if they are in the same workgroup. You can change the Working Group in the Control Panel, System.

  Good bye

• Equium A60-155: energy saver ends at the beginning upward

  I had a lot of problems with breaking that I did a new install, but when I put all the drivers and stuff on the eve software power puts an end to started and I can not install hotkey-dd-xp-10008sa-en. It says drivers not found.
  I used a Xp slipstreamed sp2 installation disc got the updates that I needed Microsoft.

  Can the poster me an iso of the original installation disk for Equium A60 - 155 that I've not had one, or we shed some light on the problem

  Hello

  I guess you can not install the Toshiba Power Saver because you use an order of bad installation.
  All important information about the installation of the driver s you will find on the page of Toshiba diver.

  In addition, if you have installed the SP2 of Microsoft so you should check fact sheet Microsoft Windows XP SP2 update on the necessary and important Toshiba updates.

  Good bye

• HP Color LaserJet MFP M177 Pro: MFP177 frozen screen energy saver logo

  My new Color LaserJet Pro MFP M177fw still works, but the front is frozen with the logos of saver hp and energy, which means that there are no features in the control panel. I can therefore use it to manually, make copies, or do something that I would normally with the front panel. I tried everything the hp support asked me to do it (plug it directly into the wall, restart it, hold down the power button for a minute, plug, reconnect everything, etc.) and nothing has solved the problem. It is clearly a hardware problem?

  Hi @eng-ihab,.

  Welcome to the Forums of HP Support! I see that the printer is locked during initialization. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The update of the firmware usually fixes this problem, but I don't see one available for Windows 10. If the printer is installed on an older operating system also, I would say to run the update of the firmware with it.

  Here is the link: HP Color LaserJet Pro MFP M177fw, select the operating system.

  I would say to remove all toners, turn on the printer and wait for the printer to the State to reinstall toners manually. Just to rule out a toner not sitting correctly, the origin of this problem.

  You can move manually the carousel is not blocked.

  Open the scanner cover and cover less than one so you should see the toners.

  On the left side of the black frame, you will see an oval hole with a piece of white plastic on the inside.

  You will need to use something to press the white plastic piece, at the same time, push the carousel backwards, do not touch the toner however. It must be in good position to get out the toner.

  I've included a picture with the region, where to use the manual function of the printer.

  

  Make sure that the print queue is also allowed to leave, I saw this also cause the printer go in initialization.

  I can send a private message with some one more step to try.
  In the forum next to your handle name simply click on the envelope to see.

  If there is anything else I can help you, let me know. Thank you.

• Energy saver settings missing from the Profile Manager

  I'm under Server.app 5.1 on a MacPro El Capitan (10.11.4) running. I am trying to create a fake profile in the Profile Manager to distribute to my class to illustrate patterns of school boards and want to create one for the energy-saving settings. Unfortunately, this option is missing! Where would it be? That's all I see for the operating system parameters:

  

  Elementary my dear Watson!

  • Ensure that you have a group of devices for the appropriate devices, whether it is portable Mac or iOS devices.

  

  • Register at least a device in this group

  

  • And continue to change the settings for this group
  • You will find savings on OS X to change

  

  • The same would be the procedure for iOS payload found in the part of the iOS.

  Hope that helps

  Leo

• Satellite M100-165: energy saver indicates the lifetime of battery only in percentage

  On my M100-165, when using the laptop with the battery, the Toshiba Power Saver does not show the battery time remaining... only the percentage of the battery power.

  How can I change this?

  Hello

  On my laptop, Toshiba power Saver saver also displays time only with percent.
  But I unplugged the laptop AC adapter and the small power supply icon appears in the taskbar. Then I wait until the power goes up to 97-98% and go with my cursor over the icon. The time is then displayed in percent, the hours and minutes.

• Equium EA60-155 has no much memory

  Bought a few months ago and I'm not expected that unity is very slow. When I click on the information system, it indicates that memory is just 192 MB - is it just me, or isn't this supposed to be at least 256 MB on these machines?

  [Edited by: admin on 29 July 05 06:44]

  Hi Colin,

  Your EA60 uses the shared RAM for the graphics card. This means that a part of your available RAM is reserved for use graphics (usually 64 MB) and the rest is available for use of the general system. The effect is to reduce your available RAM: 256 MB to 192 MB when you query your information system.

  Your BIOS may have an option (UMA I think) that will allow you to change this allocation. The options available are 16 MB, 32 MB, 64 MB and 128 MB. Generally, 64 MB is the default, but if you do not use the software which is dependent on the graphic quality usually (game or utility of photograph), then you can reduce to make more RAM available for general use.

  HTH

  Post edited by: NickyNoogle

• Utility energy saver does not run on the new OS

  Hello

  I reinstalled win XP pro SP2 ED.4 Hun codename:Simplicity on my freshly purchased toshiba A110-253. My question is this:
  How can I install the Power Saver utility on it?
  I downloaded the utility of the European Union of Toshiba's official website: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There are 2 subcategories in the Stellite A110 series: (PSAB0) and (PSAB6)
  It confused me a little, although I worry too much on this subject, I tried to install both, without success

  At the time where I'm aiming by running the installation file, the following error alert message appears:
  16-bit program cannot be run under Windows / must be something similar to that of the English version.

  Other utilities have been installed correctly, and they run correctly. I wouldn't ride the windows using the recovery CD, I prefer the one I use now.

  Having my laptop without the Power Saver utility rather annoying is that I am constantly on the go and don't have the possibility to recharge the batteries all the time.

  I hope someone can help me.
  Thank you in advance!

  Post edited by: beigli69

  Hello

  If you check laptop model label on the low side you will find a number of good model. I assume it must be satellite A110 - 253 (PSAB6E). Am I wrong?

  So now, choose the model of laptop just and download Power Saver Driver V2.42.0.4C and Power Saver Utility V7.03.07C. I guess you know that the order of the facilities is very important and if you check Installations instructions you will see Power saver pilot listed first and must also be preinstalled in a first time.

  By the way: it is always useful to create Tools & Utilities CD before you install own OS. Doing this, you should not upload anything just use this CD and install all necessary things in order.

  Good bye