EA6700 - Unable to connect to your router SmartWifi

Similar Questions

• ea4500 unable to connect to the router smartwifi

  Since yesterday my linksys smartwifi account says that it cannot connect to my ea4500.

  I pedaled power the router itself and it is not fixed.

  The router has access to the internet. I can also access the router locally using 192.168.1.1

  Is there a setting somewhere in the router UI that will allow me to sign out and back in on the account of smartwifi?

  Linksys system has been up and dow lately so it's most likely the problem. Sometimes its down for days at a time. Very unreliable. Give him one day and see if it comes back. Can the mods can follow it and put it on a sticky?

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• My new 6 iPhone says: unable to connect. Your identifier Apple is not enabled for iTunes Connect ~ (2002) Please help!

  My new 6 iPhone says: unable to connect. Your identifier Apple is not enabled for iTunes Connect ~ (2002) Please help!

  Hello

  Have you used this Email address & apple id on another device from apple

  Before the address e-mail is able to send & receive emails?

  See you soon

  Brian

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• Re: Satellite L350 - unable to connect to my router

  I wonder if anyone can help.

  My portable Satelite L350 will connect to each wireless network, I met with the exception of my house. This is a Buffalo wireless router and other laptops will connect to it no problem, it seems that my laptop and router buffalo communicate with each other.

  Anyone got any suggestions?

  Hello

  If you are looking for wireless networks in range you can see your Buffalo router?

  Make sure you are using the same standard wireless to the router and the laptop, for example, 802.11 g or draft N.
  On the laptop, you can check this in the properties of the card WLAN (Device Manager).

  If you use Windows Vista, you must disable the functionality of the energy-saving WLAN card. You can find in power management.

  Have you tried another laptop on your router? Maybe the router causing this problem and not the laptop

  Welcome them

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• Satellite A300D - unable to connect to the router

  I can't connect to my wireless modem that works correctly for other laptops at home.

  I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

  I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

  Help, please!

  Hello

  Why you try to reinstall the modem driver if you have a problem with your wireless network card?

  Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

  So in your case, I would try to update the firmware on your router.
  If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

• Unable to connect to my router Belkin WLAN and Satellite A200 L300

  Hi all

  This is my first thread ever so please be gentle with me
  I have Satellite A200 2 years now and I am having some problems. All of a sudden I can not connect to my modem wireless (belkin).

  I see my two neighbors modems but not full mine force in the configfree radar
  I took my A200 to work and it can connect with no problem.
  I have a L300 also now the confusing part is that it will connect at home, work and can only see 1 of my neighbouring modems sometimes but mine is full forcibly in configfree radar

  I'm simply not see something like this would point to any problems with my modem but also no problem with the A200 as it will connect to the work.
  Any help would be appreciated
  Thank you

  First try to reboot your router.
  As I see WLAN works well on your Satellite A200 and I guess there is a problem with the WLAN settings.

  Restart your router and check the connectivity again.

• Unable to connect to my router wireless - Satellite A200

  Hello

  Can someone help me to connect my laptop to my wireless router? He used to work, but note accept the security code that my other pc is running without problems. The laptop connects to other unsecured sites and is ok hard wired to the router. I tried re enstating the router on the laptop but not joy.

  Anyone got any ideas I can try?

  Thank you

  Hello

  Are you sure you used the security code? Maybe do you a misspelling, so I would try to check it again.

  In addition if you use DHCP on your router, your laptop get an IP address?

  By the way: Toshiba laptop you have and you did update the driver WLAN?

• Unable to connect to the router

  -Please ignore this message: I did not wait enough to do the factory reset. It seems that launch a factory reset without waiting for 10 seconds only restarts the router.

  Hello

  Today I tried to connect to my router (I do not use it for a few years) and it didn't work at all.

  Initially, I plugged it in just 2 RJ45 cables: one for internet, one for the PC. The computer could not connect to the router (DHCP failed).

  I then restored the factory settings and tried again: same thing, the computer could not find the router via DHCP.

  I tried to force an IP address (IP: 192.168.1.5, mask: 255.255.255.0 Gateway: 192.168.1.1).

  By forcing the INVESTIGATION period, I was able to connect to the router, but when I tried connect to 192.168.1.1 with admin/password, it wouldn't let me (bad password - don't forget I restored it to factory settings, several times actually). The address http://routeurlogin.net/ is not found (404) and I was unable to go on websites (404). A curious thing is, using this connection, I was able to connect to Skype (and send/receive messages), although the sites Web could not be reached from a browser.

  I'm running out of ideas to solve the problem, but I suspect a hardware problem, so any help would be welcome.

  Yes he did.

  I couldn't find an option to delete my message, otherwise I would have done it.

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Error in the configuration wizard. Unable to connect to the router.

  All connections are correct.  I am able to connect to IE and FireFox with ethernet and connected my corner via "Linksys".  I opened with ISP address and configure security.  Is there more in the configuration I have to do?

  What is the model number of your router? If the internet connection is working well, then you need not to worry the installation disc. As long as you know how to set up the router manually and able to access the interface of the router then there is nothing to worry about. It is with the disk configuration wizard is exceeded or there could be some firewall software on the computer that is blocking the setup of your router to detect Wizard. It is the most common problem I encountered, but well it's always the manual configuration. If you do not need to install and use the software just go to the linksys download site, or you can also consider using another computer.

• Unable to connect to the router WRT54GS

  I recently had a malware attack on my computer by cable.  It has since been cleaned, but I still can't connect to the signal wireless to my router on my laptop.  I had no problem before the attack.

  I used the EasyLink Advisor steps to try to fix the fitting, but it did not work.  No idea what else I can / try?

  Thank you
  Drew

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.
  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...
  Now let's see if you can locate your wireless network and try to connect...