EA6900 DHCP timeout problem

This is by far the stronger and more sophisticated wireless router that I have ever used, but it has a small problem in providing wireless services on my phone.  I looked through all the settings and read all the troubleshooting assistance, and I can't find which could control the router sending a momentary power switch pulse exactly all the 60 minutes that is picked up by one of my Apps (AutomateItPro) phone...

I have had no problem affecting this router upward, mosty plain vanilla right out of the box.  Because I use a cable broadband ISP (Charter) I use DHCP - so I don't get in other internet protocoal settings that control "Connect on Demand", etc..  Nor was I changed the default maximum, length of lease of customer value in the configuration of the router, it's always 1440 minutes (24 hours).

This app on my phone has the value triggers a notification when I disconnect all WiFi (this router provides my WiFi at home but I have the app to the WiFi network of any) and activate the mobile data and vice versa with a different tone.  With precision every 60 minutes since I have hard reset the router (with an unplugged power cable), I get a notification of your momentary loss of WiFi follwed in 2 seconds by restoring the WiFi.  I tried a hard reset twice and it is a signal on the router, not the app, or my phone.  The problem is that this continues to happen at night when I am sleeping, and this powerful application overrides my silent nights for the phone settings, so I can still hear him.

What is the setting that does this on the router, and it is possible to prevent him from doing this (emission of the momentary power pulse of the wireless signal)?  I haven't checked if it is a reassignment of IP addresses at this time also...  I really like this router, but being awake is a pain...  (Yes there are other solutions of circumvention of the APP, but those who are not as reliable I found like stop this problem at the source of the router if possible.)

Thanks from a newbie!

Hey Ronald,.

I used to have the same problem.

The way I fixed it changed the name of one of my networks.

This router is dual band and has a band of 5 GHz and 2.4 GHz band.

I had both my SSID network named the same thing with the same password.  For a reason which is that... my connection would constantly.  After changing the name and password of one of the bands I have over this problem.

Hope that helps Ronald.

I know it's really annoying.

Tags: Linksys Routers

Similar Questions

  • com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient Timeout problem

    We have an obligation to convert large tiff files full text PDF. I use the following code to convert files of small size, but with a large file, I see a timeout problem.

    ALC-CEO-10010-000: com.adobe.livecycle.generatepdf.client.ConversionException: ALC-CEO-010-010-The conversion has expired.

    User must have administrator privileges. Looks like some privileges are missing.

    -Wasil

  • Gateway Timeout problem

    With the help of a MacBook Pro 13' (mid-2012) El Capitan (Version 10.11.1). running

    Usually living abroad, came home last night and managed to connect my computer to the internet WiFi and my parents very well. Could access any Web site, ran perfectly. This morning I started having a problem where I can open only a small number of websites (Facebook, Youtube, Google, Apple, Wikipedia), another Web site gives me a ' Gateway Timeout: unable to connect to the remote host " message, even large reputable (NYT, etc.)."

    Here are the facts:

    • MacBook connects to the WiFi
    • MacBook restarted, the problem persisted
    • Reset the router (FRITZ!) 6360 Box cable, German provider is Unitymedia)-online everything has worked again for about 2 minutes, and then the problem comes back
    • All other computers/phones in the House has no problem, can access any Web site
    • Connected my MacBook to the Ether, has worked well. Yet once unplugged and tried WiFi problem returned. Ethernet plugged back in (with WiFi off), now, even the ethernet gives me the same problem
    • Software antiVirus Sophos's active and firewall settings and Web Protection were not yet activated (no idea why)
    • First time this question has occurred (connected to this dozens of times network and worked very well, but with the Mavericks) and has produced at night - everything worked fine yesterday and I am not aware of having made changes to anything.

    Found a thread with a person having a similar problem on another forum of support, but in his case, all its devices had the question so that, in our House, everything works but my MacBook. So I doubt that it is a problem with the provider or router.

    Any help would be greatly appreciated!

    AntiVirus software is Sophos.

    Uninstall completely and evaluate the results.

    Use the Remove Sophos Anti-virus program. It will be installed in the folder Applications on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Beware that the effectiveness of the uninstall program is poor, a typical feature of garbage software.

  • TCP timeout problems

    Hello

    Request: I'm using LabVIEW 8.2 to connect with a RFID reader.

    I connect to the player via TCP and write (write block TCP) a number of orders (connection, system of game settings, player tags list queries), and my VI works smoothly, with one exception: since I don't know how many tags in advance will be near the read drive ability, I have no method to measure the length of the data back (the block of reading TCP bytes to read).

    To break down the problem, I can either read a very small number of bytes and avoid a time-out error 56, losing some data back in the process, or I can allow the system to timeout, read a large number of bytes and allowing every step of execution take time designated in the time-out period rather than the amount of time it takes indeed for the reader to respond.

    My question, simplified: is there a way I can use the TCP protocol to read only the data that is sent (rather not specify the number of bytes that will be read, which allows the VI to make when no additional data is available)?

    Thank you in advance.

    As far as I know, there is no way to check the amount of data it is in advance. Some protocols have a predefined byte quantity, or send a message by sending the length of the message, for you first read and know how many bytes you need.

    If you can not do that, what you want to do is call reading TCP primitive in a while loop until you get an error in time-out and the warp threads in a tunnel of automatic indexing output. You can then wire the string array resulting 1 d in the string concatenate primitive to convert it to a string. In this way, you can use a short timeout and read a small number of bytes for each reading without loss of information.

  • Timeout problems

    Dear friends, I am working on a motor controller application that uses state machines to plan tasks to accomplish. I need to order 2 motors and each is managed by a state machine. These state machines have been transformed into a sub VI, once they have exactly the same functionality. Everything works perfectly, except by the fact that, for some reason I don't understand, a machine behaviors differently from the other folder.

    To make things clearer, we will appoint an engine as the engine of X and the other as an engine of Y.

    I used 'Elapsed time' live to build structures of timeout in the state machine. Motor x laws of State machine as expected, but Y it is unclear just of delays implemented. Two of them being the same under VI, I don't see any way they could present different results when they are subject to the same conditions.

    It is important to say that these screws of State machine share a resource VISA RS232. In VI sup, I used an input and output connector so the line VISA can be connected to the first VI and it will output goes directly to the entrance of the second.

    I noticed that changing the operating system stopped the screws changes witch VI ignores the timeout. The second VI is always the problem. I could clearly understand there's a delay time between the execution of the first machine of the State and the second, once there is a shared resource. But it does not seem normal to have a specific timeout ignored.

    I hope someone could help me with that.

    Thank you very much

    Leonardo

    Is that the Subvi execution is set to 'Reenterant '?  If this is the the second call will wait until the end of the first run.  Go to file-> properties VI, select the performance tab, and check the "re-entrant execution."  This clones different VI instances when it is called

  • Internet a serious - unable to connect to any site problems, timeout problem

    Hello

    I am facing a problem when I am trying to connect to the internet, the problem is that I am getting timeout error.
    When I see the State it shows me

    Envoy: 193448 received: 123

    The problem is that I can see the bytes sent fom my computer at the rate so high that it is not allowing me to receive whatever it is... It seems to me is perhaps a kind of Virus that blocks the incoming packets and also stifles internet sending of junk (not sure what). I checked the Task Manager and I see 99% the system idle process.

    Help me what shd I do?

    Hi Abhishek,

    ·         Do you use Internet Explorer to browse the web?

    ·         What is the exact message that you receive?

    Method 1: I see you have another thread posted about the infection by the virus. I suggest that you run the scan as suggested and see if it helps.

    Method 2: Run the Fixit tool in the following article to check the issue.

    Internet Explorer error "connection timed out" when server does not

  • EA4500: DHCP reservations problems after FW v2.1.41 (Build 162351)

    Hi people...

    I liked the new FW 2.1.41 (Build 162351), BUT I'm having
    a big problem: DHCP reservations.

    With the FW 2.1.41 (Build 162351), reserves of DHCP
    does not work. I have set up the set, but after I click in a request,
    EA4500 change everything, put a few crazy IPs to my devices.
    remove certain devices etc.

    SOLVED!

    I support FW v2.0.37 and I noticed that there is no subnet mask 255.255.254.0 in options...

    Then, I put the new FW (2.1.41) and choose the 255.255.255.0 subnet...

    When I tried to make the DHCP reservations I don't have problems...

    In short:

    If I use the FW 2.1.39, I can use the subnet mask 255.255.254.0 and the

    DHCP reservations works...

    If I use the FW 2.1.41, just with the subnet mask 255.255.255.0 or

    255.255.255.128 or 255.255.255.192 which DHCP reservations works.

    In my view, that it is a firmware issue

    Now I'm happy.

    Thanks for all!

  • WRT54G v7 - Client DHCP list problem

    Hi all

    I have WRT54G v.7 - firmware ver.7.00.8.

    by mistake I removed the bad PC of the DHCP Client Table. / Status/LAN

    How can I restore the list adding the pc to the list, as there are only there ability to delete/remove?

    Another question,

    How many clients/PC wireless to the router can handle without a problem? ...

    I noticed that when we are in the 3 or 4 clients wireless connection is very unstable, slow response, connection drops.

    Is there anything I can do to improve this issue?

    Ty for any information,

    Frluga

    Restart your computer and it will receive a new IP address of the router.

  • WRT54G v7 client DHCP WAN problem

    I recently started having a strange problem with my WRT54G. Internet access via a modem cable and has been fine for months of work, and the cable modem works fine so I suspect that the problem is with the router. However the router also works for the most part, so I thought I'd see if anyone here has any suggestions. Here are the details of the problem:

    • The WAN router configuration has been set to DHCP.
    • It is used to pick up a new IP address of the cable modem with happiness when necessary.
    • One night the router stopped to pick up an IP WAN side. (nothing has changed. I am alone in the House that goes anywhere near the router)
    • Connect the modem directly to a PC works fine (suggesting to the DHCP server on the modem is fine).
    • Copy the config IP WAN from the PC to the router, as a static IP address, also allows to operate when the modem is plugged into the router and the router to a PC (which is how it is set up now, but it's a pain to have to mess with the physical connections and reconfigure the router manually whenever the modem abandons a connection (which is another question, but not one for this forum...)).

    So both the modem and the router seems to work except for the router DHCP clients. It works well as a DHCP server for the local network.

    The firmware has been upgraded (and functional), I followed the standard procedure to turn on, I have released and renewed the IP address through the status tab in the web interface, and I tried to reset the router using the button on the unit and through the web interface to return to the default settings.

    Any suggestions?

    If you have upgraded the firmware of the Rotuer and also reset the router.

    So what you do is - to open the configuration page of the Rotuer http://192.168.1.1 and admin as the password.

    Changed the type of Internet connection to DHCP and then changed the MTU to manual and size to 1364 save settings.

    Then checked the WAN IP address if its 0.0.0.0 click the Configuration tab and then click the sub-tab address Mac Clone-check the activate click on clone Mac - then save your PC settings-check the WAN IP 0.0.0.0 if box-so == Powercycle the network way to unplug the power cable from the router and the Modem and plug it in again after 30 seconds.

    When you connect the back make sure you plug the Modem first and then the router.

    Check if you're able to online or not.

  • OfficeJet 6700 DHCP causing problems with airprint and web services

    I find it kind of interesting that this printer does not properly with DHCP enabled by default and more easy to use configuration.  My new printer seems to require to manually set the ip and dns settings before the features of web services or airprint worked correctly.  It was strange because printing from a PC and iMac worked well, it was that only the web services feature (unable to connect to the server) and the airprint from IOS devices failed (printer shows up but just disappeared rather than printing impression actually).  Someone else has seen this and not do anything to solve this problem?

    The problem with this is effectively resolved through static DNS, generally. The reason it is and not with other functions, is that our print servers that connect you with are able to communicate more easily with some DNS configurations on the other.

    For this reason, HP recommends generally defining the DNS for your printer on the parameters of Google DNS: 8.8.8.8 & 8.8.4.4.

    Does that answer your question?

    Have a great day!

  • DHCP snooping problem!

    Hello world

    I have a problem with dhcp snooping

    I have three switch, sw1 and sw2 to connect to a x 3750 as distribution switch

    My dhcp server is connect sw1 and clients connect to sw2

    I did trust the corresponding port and disable ip dhcp snooping information

    but when I configured dhcp snooping my client cannot get the ip address?

    I am grateful if someone could help me

    Did you trust ports to the DHCP server AND your circuits between switches?

  • exercise of the VM session timeout problem

    Hello

    First off all I want to thank all those who contribute on this post, I have a 5.0 vcenter and vmware view running 5 customer, the problem is that on my infrastructure vm´s of users sessions go on the time-out for the most part after 7 or 8 hours of active session is probably for security reasons , I want to turn off this option, but don t know where to find the settings for it on my vcenter, due anyone know how to disable this feature?

    Best regards!

    I am a beginner on vmware view, but I'm trying to help you.

    Most common session is disconnected as a result the VMware View connection Server Session timeout.  This global setting disconnects the sessions after the time-out expires. The default setting is 600 minutes (10 hours).

    To avoid these disconnects, educate users that there is an automatic session expiration time or increase the value of timeout in minutes via the view connection server > view Configuration > global settings and enter the time in the dialog box Session timeout.

    Remember points of certification for responses 'useful' and / or 'correct '.

    -------------

    Bil Bens

  • weird http timeout problem

    OK, maybe not weird, but weird. It's WL7sp7.

    In the std newspapers in our production environment, we see the following message "the server could not send the HTTP message during the timeout value configured. The socket has been closed. ». You can see this message only to a second interval specific than a minute... that is, in the log below, extract as the second "33" (11: 52:33, 11:55:33, 12:11:33, etc..). After a reboot, we will see only this message to the second "21" (15: 13:21, 3:21:21 PM PST, etc.).

    The problem, it is a DOTNET fact http post for this app WL application... If the messages at the wrong time DOTNET application (e.. g, to the second '33' minute) the http post fails. The DOTNET application logs the remote server took of disconnection. If you look at the logs to stdout for the same time, we see the connection timeout message. The post and the response would only last a second or two and little almost always succeeds wait for these applications, which falls on the 'bad' (milli?) second of the minute.

    I don't know if I've explained clearly this strange phenomenon. If this is not the case, let me know. An excerpt from our newspapers std:

    grep /tmp/WLPRODSVR04-stdout.log "the server could not send the HTTP message"
    # < 5 November 2008 11:52:33 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '2' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 11:55:33 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '20' to the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 12:11:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 12:34:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '4' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 12:42:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '2' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 12:53:34 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 12:57:34 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    ....
    [reboot]
    .....
    # < 5 November 2008 3:13:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 3:21:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 3:29:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 3:30:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 3:38:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 5 November 2008 16:30:21 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 16:41:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '27' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 17:56:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 18:01:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 18:08:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 18:55:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 19:11:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 19:50:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 8:00:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 8:07:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 8:20:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 9:15:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '25' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 9:34:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 9:41:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 10:14:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 10:17:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 10:24:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 10:38:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 11:04:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '25' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 11:09:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 11:28:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 11:49:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 12:20:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 12:47:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '20' to the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 12:56:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 1:10:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 1:18:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 3:29:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 6 November 2008 16:19:21 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 5:23:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 17:59:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 18:31:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 6:51:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 19:24:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 19:31:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 19:41:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 8:00:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 8:21:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 8:47:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 9:15:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 9:20:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 9:34:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 10:06:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 10:12:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 10:54:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 11:05:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 11:12:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 11:28:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '27' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    ....
    [reboot]
    .....
    # < 7 November 2008 12:24:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 12:31:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "14" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 12:31:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "14" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 12:35:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '16' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 1:14:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '17' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 1:15:09 pm PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '10' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 1:32:10 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '19' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 2:03:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '15' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 2:12:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '11' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 2:12:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '11' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 2:24:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
    # < 7 November 2008 3:39:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >

    Its a known problem with WLS 7.0 SP7 (CR300032 and CR196369) associated with CompleteHTTPMessageTimeout. WebLogic Server closes a connection intermittently while responding to the slow clients. If you have a support contract, you can open a service request and download the patch and details of the Czech Republic.

  • Toshiba 48L1433DB - USB timeout problems

    My USB Ports do not appear on my list of Source and I have a problem of "dead time".

    If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

    Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

    Very curious

    Posted by [email protected]
    My USB Ports do not appear on my list of Source and I have a problem of "dead time".

    If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

    Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

    Very curious

    As a first step, you must make sure, that it is not caused by the type format and/or stick file.
    Have you checked with a stick from another provider? Also, does come with any type of file, or related to some formats?

  • single triggered acquisition on scope timeout problems

    Hello everyone

    I'm doing a single acquisition triggered on the scope. I initialize my scope and configure the settings. I then

    Enter a loop to the whole of the trigger and then want to read a waveform of the acquisition. But he does not have a timeout.

    It simply reads the waveform right after that I put the threshold, even if she has not reached the threshold. In my view, that it does not wait for the trigger.

    Is there a way to fix this?

    I use a scope of the 2024B TDS and uses the drivers. I thought I could use the event allow visa and use the trigger as event type for the entry, and then

    Use the wait for SRQ and have a time-out of 25000ms but that didn't work. I get an error saying:

    Specified event type is not supported by the resource.

    I don't know what to do for the timeout. Y at - it other ideas that I could use or am I doing wrong?

    I have attached the vi. I am using LabView 2010.

    Thank you!

    Midna

    Look at the example in the library of Tek

Maybe you are looking for