Each system restore try results in the message "unable to restore to that date.

Similar Questions

• I want to do a "System Restore" at an earlier date than when I did a "System Restore Point"; How can I realize this "System Restore" to a date that is earlier than the "System Restore Point"?

  I am running a version of Microsoft "Vista." I want to do a "System Restore" to a date earlier than the 'Restore Point System' which is steeped in external memory of my terminal (and apparently in memory of boarding school of the terminal).  The terminal shows only the "System Restore Point" that I had introduced manually; How replace this erroneous 'system Resote Date Point' so that I can get rid of things that I wish were not included in the drive of my terminal?  Specifically, the "Ready Boost" option has ruined my terminal memory drive; That's why I want to get rid of with a "restoration of memory", but there is no other precedents "System Restore" options.

  Hello

  You will be able to perform a system restore to a restore point created or present on the system. If you have no restore point created before the questions, then you will not be able to restore it.

  For more information, see the following articles:

  System restore

  System Restore: frequently asked questions

  If you try to uninstall an application, you can read the following article to uninstall the program.

  You can see the following link to uninstall the screensaver.

  Uninstall a program

  You can also try disabling readyboost and check if it helps.

  Turn ReadyBoost on or off for a storage device

• I turned on my computer and everything was gone, even the start menu is empty. It is not let me do a system restore. That's happened? How should I do?

  It is not let me do a system restore. That's happened? How should I do?

  Use the safe mode system restore or create a new admin user account

• When I try to delete the message in the "Deleted items" folder I get an error message "some items in the folder"Deleted items"could not be deleted." year error has occurred. Any Suggestions?

  I get to see all the messages that I deleted in my "Deleted items" folder and when I try to delete the message in this folder I get an error message 'some items in the folder "Deleted items" can not be deleted.' an error has occurred.  Also when I try to delete my Inbox it won't move message from 'deleted items '.  Any suggestions?

  This is probably due to a mismatch between what is in the message store and which think that the database is in the message store.  Try to compact and repair the database and see if that fixes the problem.  See www.oehelp.com/WMUtil/

  Steve

• Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

  Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

  A solution to this problem will be appreciated.

  Thanks in advance

  Hi stephenm26904611,

  Thank you for your bug report about the extension to create a file PDF Acrobat being disabled in FF v43.

  It is a known issue and we are working on that.

  We intend to provide support in the future updates.

  Meanwhile, as a solution, you can use Adobe Create PDF extension for Chome and Internet Explorer, or use Acrobat to convert web pages to PDF.

  Thank you

  Nicos

• In Photoshop, I try to print, the message: the disk is not available

  In Photoshop, I try to print, the message: the disk is not available. Something to do with El Capitan?

  Hi Rick,

  Please make sure that the printer drivers are up to date, so please uninstall the drivers, then reinstall the latest drivers for the printer.

  Kind regards

  Tanuj

• Hi all, I'm haing adding items to my folio. When I try, I get the message ".

  Hi all

  I'm haing articles adding my folio. When I try, I get the message "Network failure." No idea what to do?

  There are known server problems. You can check the status here:

  http://status.adobedps.com/

• What should I do when I receive the message 'unable to load the flash shockwave.

  What should I do when I receive the message 'unable to load the flash shockwave.

  Hello

   
  1. how many times you get this error message? This problem is limited to specific Web pages?

  2. Once you get this error message? What is your default browser?

  
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using
  
  3. have you installed new hardware or software before the show?

  4. What is the operating system installed on the computer?

   
  5. are you logged in as administrator?
   
  
  Method 1:
  If you are facing problems with Internet Explorer 9, I suggest you read the article and try to run theFix it:
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/GP/pc_ie_start
  Note: Note that the reset Internet Explorer (IE) resets all settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
  Method 2:
   
  a. search for Internet Explorer in the start menu.
   
  b. right click and select "Run as Administrator".
   
  Check if the problem occurs.
   
   
  Method 3: Uninstall and reinstall Adobe Shockwave
   
  To uninstall a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  
  I also suggest you to download and install the latest version of Adobe Shockwave player and check if that helps:
  
  http://get.Adobe.com/Shockwave/
  Provide more information about the issue so that we can better help you.
   
  I hope this helps.

• When I try to use the parental controls, I tells me that this page could not load any ideas

  When I try to use the parental controls, I tells me that this page could not load any ideas

  Hello

  Since when are you facing this problem?

  If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• every time when I want to update my ios software. It shows the message "unable to verify update.w.

  every time when I want to update my ios software .it shows the message "unable to check the updates.

  Try to update via iTunes.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Also, take a look at this thread:

  Unable to control upgrade

  After completing the steps above, try to update your device once more.

• Trouble installing iTunes. Get the message "unable to locate network % APPDATA%/. ».

  I am trying to install the latest version of iTunes, but I get the message "Unable to locate % APPDATA%/ network.". I made sure the previous iTunes was uninstalled properly and I found a suggestion on another forum that said "click Start-Run, type regedit (without the quotes) navigate to this registry path:
  HKEY_CURRENT_USER--> Software--> Microsoft--> Windows--> the current Version--> Explorer--> user Shell folders
  Delete the key: recent (right mouse click on the folder/keys, click on delete) close the registry editor and restart the computer. »

  None worked and I have really no idea what to do. I'm not good with computers at all, then I'd be really grateful for the help.

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Elements 7 continually said "you need to restart" whenever I try to open the full Editor. SUP with that?

  Elements 7 continually said "you need to restart" whenever I try to open the full Editor. SUP with that?

  The editor preferences often get corrupted. You may need to restore the preferences of the Publisher to resolve all conflicts.

  Press the Ctrl + Shift + Alt keys and simultaneously click the button Edit in the Welcome screen. The three keys to unlock and look behind the screen of welcome to close. Or press the keys while double clicking on PhotoshopElementsEditor.exe

  You should see a pop up box with the words: settings of items file remove Adobe Photoshop?

  Click Yes

  Close items and reopen it in the normal way - then wait while it rebuilt preferences.

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• receiving the message "unable to communicate with the TWAIN device.

  I get the message "unable to communicate with the TWAIN device.

  Hi Kim,

  What is the brand and model of the scanner?

  For now, you can have a look at the link:

  http://nuance.custhelp.com/app/answers/detail/A_ID/3572/~/%E2%80%9Ccannot-communicate-with-TWAIN-device%E2%80%9D-error-message

  http://www.computing.NET/answers/Windows-XP/BRO-MFC240C-scanning-problem/160840.html

  http://www.hwkb.com/Uwe/Forum.aspx/scanner/615/scanner-problem-TWAIN-vs-WIA

  http://forums.techguy.org/hardware/270578-brother-mfc4800-scanner-kicking-my.html