each tab seems to get its own window it's design or a bug?

It seems that every single tab gets its own unique window, now I think that it is ineffective as well as make being organized next to firefox a more difficult task. Since when you close all the windows that hold 1 tab it removes from the main window and the Group menu.

Now I hope it's just a bug caused by the new, but also great packed feature that the grouping tool is.

You can try to change some browser.taskbar Pref. * enable on the subject: config to false page.

I'm not on Windows 7, so I don't know what effect they have.

Tools > Options > tabs > 'show glimpses of tab in the Windows task bar.

Tags: All Products

Similar Questions

  • Installed XtraFinder and (?) Trash now opens as a tab Finder - how to open Trash in its own window?

    Installed XtraFinder and (?) Trash now opens as a tab Finder - how to open Trash in its own window? With the help of the Mavericks

    Ask the developer of XtraFinder.  It is their product at the origin of the problem, not the Apple software.

  • Windows Vista won't allow me to open my files in its own window

    I can't get Windows Vista change to allow me to open my files in their own windows. I was not able to do this since I bought this computer a few months ago. I thought I did something wrong, but I follow the directions to the T and it continues to open only the folders in the same window.  Y at - it something I'm doing wrong? I follow the directions for help and check open in its own window and yet it acts as if I do not change it... I apply and ok and press to apply to all the files and still nothing.

    I don't know what are the instructions you followed, so here is a series of instructions on opening the windows, including how open each instance in its separate window: http://www.vistax64.com/tutorials/91587-open-folder-same-separate-new-window.html.  Read full article and follow ALL these instructions (there are parts you include in your post that are important to make it work - but then again you probably do not understand everything).

    In the meantime, to open a specific folder in a new window, you can right click on the file and click on open rather than explore.  This will open the folder in a new window.  It's an extra step, but it is a workaround until you find the answer (if the above did not answer it).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Is it possible to add a button that will open an attachment to a specific page in its own window?

    I have two PDFs generated from Framemaker.

    PDF1 is a user's guide.

    PDF2 is a test plan document.

    I want to include the possibility for the reader in PDF2, open the guide of the user to a specific page (topic) if they need to access detailed information about a test item.

    In order to ensure that the PDF2 player has the user's guide, I thought I want to implement an attachment under PDF2 PDF1.

    By browsing the ' net, I found that I can add a 'link' (rectangular clickable area) on PDF2 which, when clicked, will open PDF1 in its own window to a specified page number. GREAT!

    But... what I want to do is to place a * key * on the PDF2 (with a tag) who will perform this task (open PDF1 to a specified page in its own window). However, I am getting lost and does not know how to do this (or if this can be done at all).

    Pointers would be appreciated :-)

    Thank you.

    John

    Then... I thought about it (of course, * after * post the question.) Sigh) and given that the post is now here forever, I thought I should share my solution, for what it's worth.

    In PDF2, with PDF1 included as an attachment:

    1. Rich Media > Add button.
    2. Button to place on the page.
    3. Open the properties of the button (double click or right click > properties).
    4. Click the Actions tab.
    5. Select the Action, select go to a page view.
    6. Click Add...
      (This opens her create go to view dialog box.)
    7. Double-click on the attachment (PDF1).
    8. In the attachment, scroll to the desired page.
    9. In create go to view dialog box, click on connect.
    10. In the Properties dialog box, click Close.
    11. Reopen the Properties dialog box, go to the Actions.
    12. In the action pane, click "Go to a page in another document" (the action that I had set earlier).
    13. Click on change.
    14. In the target Document section, select 'New window' field.
    15. Click OK.
    16. Click Close.
  • How to create a window with its own window border other than the local system window border?

    How to create a window with its own window border other than the local system window border?

    For example, a border: a black line with a width of 1, then a transparent line with a width of 5. Inside, it's the content pane.

    In JavaSE, there seems to be for the JFrame paintComponent() method to realize the effect.

    I can't see what you're trying to do now: it's a little trickier. You need stage.initStyle (StageStyle.TRANSPARENT), and I think you have to imitate the transparent part of the border by the presence of a second vessel inside the root container, properly positioned.

    Something like:

    
    import javafx.application.Application;
    import javafx.application.Platform;
    import javafx.event.ActionEvent;
    import javafx.event.EventHandler;
    import javafx.scene.Scene;
    import javafx.scene.control.Button;
    import javafx.scene.layout.AnchorPane;
    import javafx.scene.layout.StackPane;
    import javafx.scene.paint.Color;
    import javafx.stage.Stage;
    import javafx.stage.StageStyle;
    
    public class CustomBorderExample extends Application {
    
      @Override
      public void start(Stage primaryStage) {
      AnchorPane root = new AnchorPane();
      root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
    
      StackPane mainContainer = new StackPane();
        AnchorPane.setTopAnchor(mainContainer, 5.0);
        AnchorPane.setLeftAnchor(mainContainer, 5.0);
        AnchorPane.setRightAnchor(mainContainer, 5.0);
        AnchorPane.setBottomAnchor(mainContainer, 5.0);
      mainContainer.setStyle("-fx-background-color: aliceblue;");
      root.getChildren().add(mainContainer);
    
      primaryStage.initStyle(StageStyle.TRANSPARENT);
      final Button closeButton = new Button("Close");
        mainContainer.getChildren().add(closeButton);
        closeButton.setOnAction(new EventHandler() {
          @Override
          public void handle(ActionEvent event) {
            Platform.exit();
          }
        });
      primaryStage.setScene(new Scene(root,  300, 200, Color.TRANSPARENT));
      primaryStage.show();
      }
    
      public static void main(String[] args) {
      launch(args);
      }
    }
    
  • Classic mode by using the Alt + Tab - needs to get the active window

    I'm running Win7 Ultimate mode classic (the aero mode was just too much visual noise) and for years, I used the Alt + Tab to switch between applications. Starting with Vista, the content of the Alt + Tab pop-up window sorts and does not retain the positions she had in XP. Y at - it all the settings that I can change to get the unsorted window XP. With sorting darn, I'm looking for 'the' the window, I want to bring to the fore. I almost always several applications running (10-20) and several windows in each application, so it is not uncommon that I'll have 30-50 windows open when I'm researching a topic and try to create a document or a presentation on the topic.

    Hey jgt,
     
     
    Here is a workaround to get the classic Alt + Tab bar.
     
    1. open the Explorer Windows & a few applications so that you can start using Alt + Tab feature.
    2. press Alt + Tab keys to display the keys Alt + Tab bar.
    3. without releasing the keys, press another Alt key once and release the second ALT.

    Note: Do not release Alt + Tab again.
     
    4. now, press the Tab key to see the classic Alt + Tab bar.
     
    Note: You will need to repeat this procedure each time you want the feature back.
    If you are comfortable with the registry, you can disable the Aero Alt Tab permanently.

    If you are comfortable with the registry, you can disable the Aero Alt Tab permanently.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    To get the classic Alt Tab functionality in Windows 7 the Registry Editor:

    1. go to start, type regedit and press ENTER.
    2. go to the location following HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
    3. in the right pane, create a new DWORD AltTabSettings and set its value to 1.
    4. now, whenever you you press the keys "Alt + Tab" together, he'll show Windows XP style classic screen Switcher "Alt + Tab" rather than the new screen.
    5. to restore the default active Aero Switcher "Alt + Tab" screen, simply delete the DWORD AltTabSettings, created in step 3. Log out and sign in again to take effect.

    Hope that solves your problem.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I change the folder under Folders options browse to open each folder in its own window?

    No matter how many times I select "Open each folder in the same window", the files still open in a separate window. So I then several windows open in order to view the other subfolders. Also when I select "File Types" tab and I see that the extension of the file types: (folder) and (folder), they both show (none), which I guess is OK.  So when I click on the "Advanced" tab area 'Actions' watch [find] and [open] with Open being the DEFAULT action. But for Edit or delete buttons are greyed out! So anything that can be changed is the default action is open or find it.

    I just want to be able to open and view the folders in the same window! Do you think I have to reinstall XP Home Edition, running around SP3?

    See if this article solves your problem:

    "DIFFICULTY: open each folder in the same window.
      <>http://WindowsXP.MVPs.org/samewindow.htm >

    HTH,
    JW

  • Between tabs causes errors and move to tab into its own window. How can this be fixed or should I revert to a previous version again?

    Firefox updated on me in the later version (without my permission) which can be well except, now, whenever I have change the tabs, repeat me Javascript error, bad data and something about it being private, which lift then the tab into another window. I don't want a bunch of windows, I want as my tabs, and I don't like having to put my tabs in place whenever I have to go. It becomes extremely annoying. How can this be fixed or should I revert to a previous version again?

    Some files in the Firefox profile folder may have been reset by opting for the done box.

  • When I move a tab into its own window, the window goes behind the main screen randomly when I click on the timeline for playback. How I can pin the window up? [Mac]

    I can't reduce what is the cause of sometimes decide to disapper and to act as if it were a separate application or to stay on top of the main window. Any clues on this? So tired of having to keep to a minimum the first to find the bin window I created and then resize the main window so that it start mode full screen so that I can be able o click on the bin to strand window, I to him before.

    Hi Sam,

    See if resetting the workspace helps:

    Click window > Workspace > Reset current workspace

    Thank you

    Regalo

  • Why Firefox doesn't open Foxit Reader in its own window?

    When you navigate with Frefox, I used to be able to click on a PDF link and Foxit Reader to open the file in a separate window (Foxit). Now no matter what I do, the PDF opens in Firefox in what I assume is a reader of PDF in Firefox.

    How canI do this job like her?

    Could you try the steps in this article to support and see if they solve the problem: How to disable the built-in PDF Viewer and use another Viewer.

  • Unknown exception when a layer is open in its own window

    Hello when I ask to open a layer there are two exception of unknwon subsequently messages and nothing manages to appear in the window's layer, normal against the rest works without problem, would you have a track to advise me? I reinstale cc 2015 latest version program but the problem remains. Thanks for your advice

    Hi, thank you, I have to ctrl + alt + shift and know it's work very well, thank you

  • my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. Today the taskbar has disappeared from the bottom of the computer, I get message error system-2018375670

    my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. up-to-date as the taskbar has disappeared from the bottom of the computer, I get the message error 2018375670 system, which can do it, I can't access anything on the computer

    Hello

    Here is the Vista Forums, you send messages to.

    Vista doesn't do not part of the update free Windows 10, so 10 would not settle.

    The free update is for 7, 8/8.1 and 10.

    See you soon.

  • Why can I I have more docs multiple open with each having its own framework?

    used to be I could have multiple PS files open at the same time -each with its own framework ('frame' is what I call the stuff on each side of the image - toolbar on the left, layers, etc. on the right).  I had to reinstall all of the program recently, and since I could not get this configuration.  best I can do is floating windows, which is so difficult to work with, as often, I drag one doc to the other stuff.  I hope you can help!

    PS. using cs 6 on mac os 10.11.3

    Window > arrange > consolidate all to tabs.

    Use the "F" key to scroll through the three display modes

  • Context menu appears several times on its own! Windows 7 Home Premium

    I can hardly get anything accomplished on my desk more because the context menu appears on its own again and again, and I have to click anywhere on the screen until it goes away. Help!

    Hello

    1 follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista (Windows 7 also) cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------

    2nd - Contextual Menu (right click) troubleshooting questions are an exercise of the elimination process.

    Make a right-click is slow or weird behavior caused by context menus managers
    http://WindowsXP.MVPs.org/slowrightclick.htm
    and here:

    Manage the entries in the context menu for files, folders, disks, and objects in the Namespace
    http://WindowsXP.MVPs.org/context_folders.htm

    The ShellExView utility displays the details of shell extensions installed on your
    computer, and you can turn on and off easily each shell extension.
    http://www.NirSoft.NET/utils/shexview.html

    ShellMenuView is a small utility that displays the list of static menu items that
    appears in the context menu when you right click on a file/folder on Windows
    Solution Explorer, and allows you to easily disable unwanted menu items.
    http://www.NirSoft.NET/utils/shell_menu_view.html

    How to change or remove items from the right click Menu.
    http://www.WinVistaClub.com/E11.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Windows 7 stops on its own without warning

    My pc running windows 7 Home premium keeps stopping on its own without warning - I checked and its not overheating there are a lot of ventilation. I was told that it may be registry settings but don't see why I should pay for a reg cleaner because I do not know if it will solve this problem

    A Reg cleaner will cause more problems than it will fix. If the PC stops while using it, then see the test below tools. If it stops while his idle then you will need to check and change your power plan.

    First try running Memtest86 +, that runs from a floppy disk or CD and should eliminate or
    confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    Discover also Nvidia 'Smoke' test or equivalent ATI.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 3 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    For overclockers using stock Intel/AMD radiator and cooling fan
    You can expect temperatures of 35 to 40 ° C in idle and 60 to 65 c max when running Prime95
    http://www.alcpu.com/CoreTemp/

    CPU ID (CPUZ):
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    Also has two tabs (memory and SPD) that indicates the actual speed of the memory
    and 'SPD' tab displays the nominal speeds for each memory location that is filled.
    http://www.CPUID.com/cpuz.php

    Hard drive test - CD Bootable:
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
    For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
    Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

Maybe you are looking for