EAS does not connect via wifi company post - 1.3.5

Similar Questions

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• OfficeJet 7410 does not connect via WiFi and will not scan

  I don't know if this post is in the right place, but here goes:

  I have a 7410 OfficeJet that was connected to my home network so that I could print/scanning wireless to it from any computer in the House.  It worked well for a while.  I am running Windows XP SP 3.

  We lost power for a few days during the hurricane (Fortunately it was our one central issue), and when the power was restored the 7410 wouldn't connect to the wireless network (we have FiOS).  I checked the unit identifies the correct system ID (and I entered the WEP key), but when I try to install from the desktop computer, it can not find the 7410 (laptop computer also was not able to find the 7410).  The only way I could get the desktop to detect the 7410 is to connect it to the router with an ethernet cable (it does not work with the laptop).  I also can't connect to the wireless printer if I put the IP address in my browser (I'm able to do when it's connected via ethernet).  Not sure if it is a firewall issue.

  When the 7410 is connected to the router with the ethernet cable, I could print to it without any problems.  However, I can't scan from it.  When I try to scan, I get the error message "when trying to scan, could not find the required user interface file (Please reinstall scanning software).  I uninstalled and reinstalled the HP software, but I still get this message.  I also followed the instructions here: http://support.hp.com/us-en/document/c00516936 but that has not solved the problem.

  This morning, I uninstalled the printer with the hope that, put it back in place could solve the problem of scanning, but now the computer is not able to find the printer, even if it is connected by ethernet.

  I hope I gave enough information.  Ideas/comments/suggestions would be appreciated.

  I think I see what's happening. You just need to reestablish the connection to the printer wireless. The document below should help you with that. Once you have done so, the software shouldn't have a problem connecting to the wireless printer.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• MacBook pro running on IOS 10.11.5 does not connect to wifi on its own.

  My macbook pro does not connect to wifi instantly and sometimes not at all.

  While he looks for the networks, if I click the wifi icon, it shows my network wifi under 3 bars in the list of wifi, but even if I click on my wifi, it continues to search without connecting to it. After that it seeks for a while, it connects sometimes, but most of the time, a new screen will be pop up saying please choose a network and it will show my network on the list. If I click on my network and tap on connect, it will connect instantly.

  to connect faster, give less to think about:

  

  then ruthlessly prune this list select everything except your home network and use the [---] button to remove tham all except one that is important for you at this time.

  

  .

• Acer Tablet does not connect to WiFi

  original title: hellp

  I just bought an acer Tablet and it does not connect to WiFi

  Best result: since it's new, contact Acer, or else :-), read the instructions

  SC Tom

• Sony bravia 50 kdl50r450a does not connect with WiFi

  Hello

  I have my Hitron modem in the basement and a flight upward is my new sony bravia 50 kdl50r450a. I am able to connect via WiFi with my smart phone & top of the Tower in the same room but without any problem.

  I have this TV for a month and that once I was able to connect to the net via WiFi.

  I'm on Extreme and tested my speed and got 4 bars. It recognizes my name, modem etc. but sometimes the apps not loading even on the TV. Often, the PVR box updates and transforms itself that I have to activate manually again. This usually up the wide PIN too, I can see.

  I contacted my internet provider to test the speed which seems to be very well.  I put manually the PIN via a laptop computer to make sure that the two PINS of the TV and modem are put in correspondence. I unplugged the TV for 30 seconds.  I unplugged my modem too.  I can't get the net with the exception of a spinning ball.

  I tried internet apps... Sony browser... loading the Google page, but no keyboard can't. Each app gets a spinning ball or Try Again message?

  This set also does not recognize my .jpgs and my videos on my USB it recognizes all the smart features are completely unnecessary at this stage?

  Any suggestion would be appreciated.

  Thanks in advance!

  I have Sony KDL-50R550A and I have the same thing as SonyGal. I have only had the TV for a month and I've been able to access the Internet once and it was the first day I put in place. What SonyGal said was my same experience. I even had my cable company come out today (24/09/14) and reset on the router and updated for speed. It does not recognize the WPS, the signal is very strong, but does not connect. Only says:
  Device to wireless TV: found
  Local access: failure
  Internet access: failure
  I tried everything in the troubleshooting, disconnect, reset, prayer, etc. nothing worked. Someone please help...

• Airport Express does not connect to WiFi!

  My Airport Express has lost its connection to the WiFi and cannot reconnect, keeps flashing yellow!

  It is only used to stream music from my iPad and not connected via ethernet. Its working well for 2 years until he lost the connection to my iPad because I took the iPad out of range of WiFi. Now, I can't get the the airport to connect to the WiFi again.

  I tried to reset button Reset 20 sec, also tried turning setting turned off and now the reset button for a maneuver on once again, however, does not. Any ideas?

  Gorm.

  Hello

  There may be a firmware update available.

  Open the AirPort Utility application located in HD > Applications > utilities , then click on the AirPort Express .

  If an update is available, you must do.

• Smartphones from blackBerry Storm 2 (on Vodafone in the United Kingdom) does not connect to WiFi properly.

  I'm having a problem with my Storm 2 right now - it does not connect to the router wireless home properly.  Router is a wireless G of Belkin model.   The page "Manage the Conections" shows the connected device (green text, but - no checkmark) and the status page shows that he has an IP address assigned to it.  This is confirmed from the listing routers DHCP client.  But the WiFi icon remains Gray and I cannot get the phone to authenticate to confiure the accounts email outside the company.  Failed attempts to addresses of ping inside or outside the LAN with timeout errors.

  Can one suggest a solution to this is iiue please - even if it has replace the router!

  If it helps it is the result of the WiF self-diagnosis:

  A WiFi Diagnostics (Advanced): December 24, 2009 20:04:43

  A Wi - Fi connection
  Current profile: belkin54g
  SSID: belkin54g
  AP MAC address: 00:11:50:FF:15:20
  Security type: pre-shared Key (PSK)
  Association: success
  Authentication: success
  Local IP address: 192.168.2.11
  Signal level:-44 dBm
  Data connection speed: 54 Mbps
  Status: Acquired network
  Authentication failure reason:
  Network type: 802. 11 b / g
  Network channel: 1 pair
  Encryption: TKIP
  Group cipher: TKIP
  Gateway address: 192.168.2.1
  DHCP: success
  Primary DNS: 192.168.2.1
  Secondary DNS: 194.168.4.100
  Suffix DNS: Belkin
  Subnet mask: 255.255.255.0
  Server's domain suffix:
  Certificate: Not Applicable
  Software token: not Applicable

  Code hotspot:
  Hotspot message: not Applicable
  Hotspot status: not Applicable

  VPN
  Current profile:
  Address of the hub:
  Contact: n/a
  Authentication: n/a
  Secure the device IP:
  Status: VPN profile is not found.
  Hub address: n/a
  Hub IP:
  Primary DNS:
  Secondary DNS:
  DNS suffix:
  Set the subnet mask:
  New attempt to: life of Session:
  Re-login to:
  Failed connection attempts: 0
  Certificate: Software token does not apply:

  The question above is now sorted thanks - active Vodafone BIS on my contract and sudenly the Wi - Fi started working very well!

  Weird - but there you go, the (whims?) wonders of modern technology!

• iPhone 6s does not connect to wifi

  my iPhone 6 s does not connect to the wifi at home.  He sees the network and accepts the password.  My other apple devices will connect.  I have renewed the lease, rest the network with no luck.  Any suggestions?

  Hello

  This link should help

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Lenovo y480 does not connect to wifi

  I've had my y480 (renovated) Lenovo for about a week now and it connected to my wifi without problem the first days. Then last night it suddenly lost internet connection and has not received this morning either. I rebooted several times. All of my other "gadgets" / laptops get the connection. This one seems to find my router for a second, give me internet for a second, then don't say 'no internet connection' and then finally say that it does not find my wifi connection.

  Don't know what to try.

  Thank you

  Casey

  After that I went out for a few hours, I came back and my power went out in my apartment. Now, everything seems to work again.

  I'm confused because I tried to reset the router once.

  It is unusual to have one computer accepts not WiFi sometimes? I have not experienced this with my other computers. I want to just make sure that the problem is not something to be feared that the system is refurbished.

  Thank you very much!

• 7 tablet (1800) does not connect to Wifi with WPA2

  I have a HP 7 1800 tablet, I had connected to my wifi at home using WEP security.  Everything worked well.  But I have a new laptop and need to change the WPA2 security.  Now, the Tablet does not connect.  I have all my other devices works fine.

  Why this 7 Tablet not connect using WPA2?

  I solved my problem.

  For some reason any the the mac address has been removed from the ACL when the change to the wire for WPA2 setting.  Does that happen ever, I looked there until today.

• 7 original slate does not connect to wifi after update

  My daughter-in-law has a 7 Slate origin. It was working fine; connected to our wifi without problems, etc. I used it the other day and noticed there was an OTA update so I installed. Now, the Tablet does not connect to our wifi at all. I tried to do a factory reset, but it still won't connect. You can see my SSID and seems to try to connect; the wifi symbol shows the signal strength but gray remains and refuses to turn blue and complete the connection.

  Is there anything else I can try to make it work?

  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the HP Slate 7 more free of charge so I can better answer questions on the Forum.

  Why not to delete the network connection original, that you used to connect to your router and then scan for wireless devices?

  @abo999

  As seen in the screenshot below pictures, go to the settings--> Wi - Fi and click on your SSID and then click on forget. Scan and when you see your SSID again click on connect and provide the password. This should work for your question.

  

  

  Once you have done this, connect to the SSID of your router again.

  The nice thing about operating systems, it is that there are usually several ways to attack and possibly solve the problem.

• My laptop does not connect to Wifi? "Windows could not connect to Eden."

  My laptop does not connect to my motorala home router. It won't yet allow access to the router, the second I click on connect it says
  "Windows could not connect to Eden." Eden is the ssid of the router. There before I changed the operating system on my computer. But I don't think that's the problem. Now, it connects to any other wireless router but not my own. I installed Windows 7. Can someone help me please! If more information is needed, I'd be happy to post. Any help is appreciated.

  Hello

  I would suggest you follow the given steps and check if it helps

  Method 1: Network connection problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For your reference: Setting up a wireless network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

  Hope this information is useful.