Easiest way to transfer files between user accounts?

Similar Questions

• The fastest way to transfer files between servers...

  I have a question regarding what would be the best option to accelerate the transfer of files between 2 servers to our VMware environment. We plan to spend our GroupWise email from netware to windows and upgrade to Groupwise (v7 to v8) at the same time. We will anticipate moving about ~ 125 gigabytes of data (files ~ 517 000) and expect that it will take several hours. We would like to minimize this time better we can so we wonder what would be the best configuration of things to get there? Two virtual machines on the same host? Two virtual machines on the data store even? On different hosts, or data warehouses? Our configurations are listed below:

  -In the course of running vSphere 4.1 ESXi

  -Data stored on 2 Dell Equalogic 5500 without

  -SAN one in each of the 2 sites, physically about 3 miles away

  -3 guests, 2 to a location and 1 in the other (same places the San)

  -Transfer of data from Netware 6.5 source, destination will be Windows 2008 R2 DataCenter

  -Links gigabit between all the elements of our VMware environment, including the link between the sites (on optical fiber).

  -3 guests are able to run all our virtual machines without overloading, so if we go to the virtual computer to another host, it is not a problem.

  We would like to know what is the best way to put everything in place for the transfer, so that we can prepare before hand. Any suggestions?

  Thanks in advance.

  Well, the fastest way would be to offload the clone/copy to the San operation. If your configuration supports VAAI then the clone would happen completely on the SAN by assuming that the source and destination storage device is the same SAN. Would it be different San then the network factors in anything. For what is running on the same host, which would be beneficial for cloning a virtual machine (mainly memory footprint) should not take place on the network.

  I hope this helps!

• What is the fastest way to transfer files between two Windows 7?

  I have two machines windows 7. I use LAN to copy files. It is only 140 Kbps. Then I use TeraCopy to the task. The speed is now 410 kbit/s. It is still too slow to copy a 80 GB of files via the LAN.

  You have any good ideas?

  I Googled that there are a lot of said articles file copy Windows 7 via the LAN is slow as it is the case, is it?

  I tried to use Windows Easy Transfer. Well, I do not see the speed, and I don't know how long it will take for the transfer file either.

  I want to see a better plan and advice.

  Hello

  Transfer of files from one computer to another depends on many factors such as the speed of the computer and the method you choose to transfer the file.

  Visit the link to learn more about the methods for file transfer between two computers:

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  Reference: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/c30f6649-a0d9-4f5e-8671-904a8f5469bb

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)

• Cannot transfer files between multiple PCs.

  I have 4 PCs; One with Windows 7, two with Windows Vista and one with XP.  I want to be able to transfer files between all four of the PC.  90% of the time, the Windows 7 and Vista systems cannot see the XP system in their network lists in the file Explorer.  Very frustrating.  All the PCs are in the same workgroup.  All have their hard drive to allow others to share and change the permissions.  I is almost as if mother Microsoft won't allow that to happen.  GRRRR

  Everything good must be approached to this VERY annoying problem?

  Hello

  What antivirus/antispyware/security products on machines do you have? Be one you have NEVER
  had on them, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Some of them can cause network problems and sometimes you need to uninstall one instead of just disable
  be able to catch him as the primary cause.

  ---------------------------------------

  Check with your router manufacturer's online help (most have excellent help) and their firmware on your router
  model - also check with their forums for possible known problems.

  ---------------------------------------

  Most of these problems is associated parameters and driver. Be careful with trailing spaces when you enter in the
  data. XXXX and xxxx_ are not the same (where the '_' represents a trailing space which is invisible). The best
  way you ensure to remove the spaces to the right is to enter data and then go back up to the last character. See #5
  below.

  ----------------------------------------------------------------------------------------------------------

  Follow these steps for all machines:

  It's my generic instructions for the correct driver updates: (you want mainly to update NETWORK and WiFi card drivers).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  =========================================

  Leave a message from Bob Cerelli:

  The bases for troubleshooting are:

  1. make sure that you have the same (e.g., 192.168.0.x) intellectual property regime.

  2 make sure you have the same mask subnet, gateway, and DNS IP addresses.

  3. make sure you can ping the IP address of the other computer. Failure, just to test, make sure that you disable XP as well as any other firewall.

  4. make sure that you can test other computers by name.

  5. make sure that you have the same workgroup name (note the spaces)

  6. for purposes of troubleshooting, turn off XP and completely uninstall any other firewall software. You can always add more complexity once get you it working.

  7 with XP, make sure you have the same user name and password that the person by connecting to other computers. The default setting for XP Pro is to require a password for network access.

  8. more than details about how to network XP can be found at:

  WindowsXP - LAN
  http://www.onecomputerguy.com/Networking/xp_network.htm

  9. information on how to network Vista is located at:

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  =========================================

  More help on these sites:

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  101 home computer networks
  http://compnetworking.about.com/cs/homenetworking/a/homenetguide.htm

  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• In vista ultimate to transfer files between disks on the same computer.

  In vista ultimate, I can only transfer files computer-to-computer.  I have 2 hard drives and that you do not have another computer.  I already tried Windows Easy Transfer without success.  Please advise on how to transfer files between hard disks on the same computer

  I suggest you follow the procedure below and check if it works.

  1. Double-click the "My computer" icon on the desktop to open a new window to the Solution Explorer.
  2. Double-click the drive that contains the data you want to transfer.
  3. Find and select the files and folders you want to transfer. Select multiple items by pressing the 'Ctrl' key while clicking on the items.
  4. Click on the button "Edit" in the menu bar.
  5. If you want to make a copy of the data on the other hard drive, click on "copy". Click "Cut" If you want to move the data to the other hard drive.
  6. Double-click the "My Computer" on the desktop icon to open a new window to the Solution Explorer.
  7. Double-click the hard drive to which you want to transfer the data.
  8. Navigate to the folder where you want to place the data.
  9. Click on the button "Edit" in the menu bar.
  10. Click "Paste". Files and folders will be transferred to the current folder.

• How to change the location of the files of user account files?

  I had my hard drive partitioned and the need to change the location of my files of user account from c: to d:

  An example is the location of the files from my office.

  My user ID is Admin privilidge, but I can't find where to change of mapping file.

  I would then change the default settings within the system, so that when new users are added to the data files to point to d:

  Thank you!

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  See if the information above helps you.

  See you soon.

  Mick Murphy - Microsoft partner

• transfer files between windows xp to windows computers using Easy Transfer 8

  Original title: transfer files between computers windows xp to windows 8

  read the easy transfer method is best, but do not know if it will work moving from xp to windows 8?

  Hello

  According to the description, I understand that you want to use Easy Transfer to transfer form data Windows XP to Windows 8.

  Yes, you can use Easy Transfer to transfer data from one computer to another computer.

  Please refer to the suggestion given by SpiritX MS MVP responded on 29 December 2012 on the following thread mentioned below to check if his help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/how-do-i-tranfer-files-from-XP-to-Windows-8/42d395f0-0A4E-468d-8c2d-5088178a6d6d

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• How can I transfer files between different users on the same computer

  I set myself upward under a different name on my laptop father but necessary for the transfer of files from the original user (IE my father'd Office) to my new! How can I do this?

  The following instructions assume that you want to have two users on the computer and you do not want to move some files from one user to another user.  If this isn't the case, skip the following and post a reply.

  If the above assumption is correct, log in with administrator privileges or the user who currently owns the files and click Start > computer (in the list of the menu Start right under Documents, photos, etc.) and in the computer, double-click the drive where the files are located and then double-click on the 'Users' folder and double-click with the record of the original user and work your way to the files you want to move.  Leave this window open (and possibly drag it to the right of your screen until the mouse touches the edge and it automatically resizes to fit the right of your screen or you can resize it manually).  Then repeat the same instructions (start > computer, etc.) but the second time, when you open the 'Users' folder, navigate to the new user.  The two windows open you can now drag files from one window to the other.

• While sharing files between users, my itunes library disappeared from these two places. How can I get that back?

  As noted earlier, all trying to share music files from itunes between users on the same computer, my library of songs and videos have disappeared.  How can I cancel this and recover my music and videos?

  Hello

  I suggest you look in the folder iTunes, if the files are present there or not. The link given below shows the default location where the files are located. If they are present, then add them to the folder. Click on the link below.

  iTunes: how to share music between different accounts on a single computer

  http://support.Apple.com/kb/ht1203

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to transfer files from one account to another

  How to transfer files as music from one account to another? my old account has a virus and it got currupted and I want to know how to put my old files in my new account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  "Fix a corrupted user profile.

  Try this method.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click Show files and folders, protected the clear theHide operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

  If the steps above don't fix the problem, you should contact your provider of customer support for assistance. To find more information about customer support options that apply to this computer, click the button start , click Help and Support, and then click the ask someone or expand your search link at the bottom of the Help window.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones to transfer files between the desktop and Blackberry

  I'm new to Blackberry and do research on how to transfer files Notepad or Wordpad from my office to the Blackberry.

  I am an old user of Palm, and there is a built-in function of memos of synchronization between the desktop and the handheld device.

  I'm not necessarily looking for to be able to automatically synchronize these memos.  Just having the ability to transfer them back and forth between the office and the Blackberry when there are updates.

  To my office, I use Outlook (with a FranklinCovey component software plug-in called PlanPlus for Outlook) on Windows XP Professional, sync to a Blackberry Curve.

  Thank you.

  Hi and welcome to the Forums!

  See this article for how to configure your BB to function as a home (or readers) USB drive on your PC:

  • http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...

  Hope that helps!

• Identify the best way to transfer data between applications in Essbase

  Hello Experts,
  
  
  One of my clients uses Hyperion System 9.3.1 and they try to understand if the partitioning might be a way to automate the transfer of data between applications Essbase (using the partitioning of replication).
  
  The challenge, they say, is that they may need to send the budget a source application (SLVQ) data to an application (consolidated) target. Data can be changed in Conso and returned to the SLVQ for review.
  
  They get warnings when they define partitions in both directions because the partitions are overlapping, but it works.
  
  Are there concepts or reasons why they should not use this function (transfer in both directions)? Is this something that is used by other companies?
  
  Their alternative is to export data in text file, then reload with rule files. It seems more difficult to define (MaxL scripts-> text files-> rules of files) with more chances of getting errors. Is there some other effective solutions which we do not understand?
  
  Please suggest.
  
  Thanks in advance
  
  Kind regards
  Jingle

  Hi Lisa,
  other than the scores, text file
  There are two more, according to my knowledge

  1 XREF
  2 HAL (Hyperion Application Link) using adapters essbase

  We use the XREF and HAL to our company to transfer data between applications according to the needs.
  I hope this helps.

  Dornakal.
  www.dornakal.blogspot.com

• What is the best way to create a limited user account?

  I'm trying to set up a user account which only allows access to the media, optical drive (read-only, if possible), programs 3 cards and records in a folder that is not visible to this account. What is the best way to go about this?

  Thank you!

  Hello

  You can check the links that has information about the types of accounts of user below.

  Types of user accounts: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_c_account_types.mspx?mfr=true

  Overview of user accounts: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/usercpl_overview.mspx?mfr=true

  How to create and configure user accounts in Windows XP: http://support.microsoft.com/kb/279783

• Cannot delete files from user accounts.

  Original title: wifes username.

  When we got our laptop I seized my wife as the user's name. Now that she uses our office I'm the only person who uses the laptop, I tried everything to remove his name from the computer. However, his name always comes as a user, his name, and then click documents. Is it possible to delete his name all together. Thank you.

  Hello

  How have you tried to delete the user account from the computer?

  When the user account is deleted, make sure that you select delete files.

  a. open user accounts by clicking the Start button > Control Panel > accounts user and family safety > user accounts > manage another account.
  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. click the account you want to delete and then click on delete account.
  c. decide if you want to keep or delete the files created under the account by clicking on the file to keep, or delete files.
  d. click on delete account.

  Reference: user accounts: frequently asked questions

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.