Easy hardware of digital display 7 segments

I need to display several digital screens (6) 7 segments on separate display hardware.  I will expose these numerical values on the screen and on the 7-segment digital display at the same time.

Here is an example of a digital display 7 segments I'm talking about:

https://www.SparkFun.com/products/11441

This material has four display 7 segments and I think it would work.

Now my question, is there any other options for in Labview for controlling an external digital display?

I thought I'd use Toolkit Labview Arduino to address these external displays.  Given that I've never used the Arduino, I wanted to know if there is an easier way in Labview to control a display 7 digital segments.

Thank you

Doug


Tags: NI Software

Similar Questions

  • where is my digital display?

    What happened to my digital display? He disappeared. There at least on my end.

    1 first make visible

    2. it's FAR to the right

  • How can I change the data format of the digital display of the digital meter?

    I created a screen that uses digital counters to display data.  Each meter has its visible digital display so that the user can see the level accurately.  I have changed the format of the data from the meter to 2 digits of precision and want to display to have the same format, but there seems to be no way to do it.  The digital display is locked to 6 significant figures, which will be confusing for my users.  I know that this was possible in previous versions of LabVIEW, but was somehow lost to 8.6.1 and 2009.

    I am aware that I could do some "work-arounds" with channels or replacing the digital screens with digital indicators, but it is not acceptable.  How can I change the properties of digital signage?

    Hi AEI_JR,

    on the Properties dialog box, when you set the display format of the counter, you will find a switch to choose between 'Digital' (the default) and "digital display"...

  • digital display to init

    I have a digital display and a button in my vi. When the button is pressed, some arithmetic calculations will happen (abt of takes two seconds) and result shown on the digital display. If the result is less than a certain value the bg text will be red, or grey.
    I have no problem writing the vi above.
    But I know not how, before the result is calculated (before two seconds is up), I want the digital display to show the color green and empty. How can I do this? overtime, the button is pressed, the display must be erased and gray, until the calculation is performed.

    Digital indicators will always indicate a value.  The default value is zero.

    But if you want to appear empty, you could make the font color the same as the background color.  Then when the time is up, set by program the font color to the original color to make it visible.

  • The number of digits on the digital display of cursor

    I have a slider control with a display of %.1f format that works well for the scale. On the appearance tab, I checked the digital displays, see the. This view seems to have no formatting control. I tried to adjust the size, but it adjusts not perfectly, either too many numbers or partial numbers. Can it not be controlled except by creating my own indicator?

    Also, I would like to know the difference between digital and digital display on the tab of display format.

    Thank you

    JVH

    Move the cursor to properties-> display Format. And where it says 'Digital' choose digital display. Then you can format.

    jvh75021 wrote:

    Also, I would like to know the difference between digital and digital display on the tab of display format.

    Thank you

    JVH

    It seems that you know the answer yourself.

    'Digital' formats the numbers of legend of the balance. 'Digital' formats the digital display.

  • How to change the precision of cursor digital display control program

    I want to change the precision of digital display of cursor control my Labview 2013 program. I find no property this slider changes digital display format.

    RT clk digital signage > create > property node >string format

    you could also do the balance of the slide, if necessary...

    in clk front panel properties: rt > goto display courrieronglet > goto drop-down list and choose 'digital display 0' and format

  • Digital display of the LabVIEW Control gauge

    I created a gauge control to emulate a rose compass as suggested by other posts. I filled the control with 0, 30, 60, etc. to 330 and left blank for the last entry as 360 parameter overwrites the entry 0. I chose 'Allow Undefined values' and everything works as required on the development system, click on the 30 '30' poster text entry area, use the text input Select box and a separate digital text box opens to allow something like 15 to affix, which then appears on the display bracketing <15>as described in the help of LabVIEW the digital extra text box then disappears.

    When I built the system and install it on the target computer, this last action does not occur. The digital extra text box remains in view of the Panel, while I have two displayed values. This extra box remains on the screen even if a value is selected via the mouse. What's not?


  • the digital display on a photo

    I'm trying to display a digital indicator in an image

    is this possible?

    I enclose my VI... It also contains the image

    As I said, use the REARRANGE the toolbar button.

  • Display 7 segments of the keyboard still shows a six

    Hello, I am a student of renewable energy engineering and I have a problem with a circuit that I made. This circuit is composed on a 0-9 keyboard connected to a 74HC147, which is connected to a 4511BD, which is then connect to a red screen of seven segments with a common cathode.

    The problem is that it doesn't matter which button on the keyboard I press on, the screen still shows a six.

    I've ran out of ideas and I don't know why it does not work as it should.

    I would be very grateful if someone could help me out, I'll let the ms11 here file. Thank you.

    I already solved it, I just had to replace those no. buttons help NC buttons and had to add a few don't wear beside the 74147.
    Thank you, however.

  • The best methods to prepare to read a display 7-segment

    What are the best techniques to use to get the imaqFindLCDSegments works well?

    I'm currently thresholding of image and using erosion Morpholgy tool to separate the segments but am gettign an error saying that "the input image is not an LCD or LED valid calibration image.

    Using this function with imaqReadLCD I can read numbers, but all the letters appear to be a problem. C all error above a L manages to move the stadium to find the causes, but at the stage of the reading, I said that the KING is not valid

    Thanks in advanced for any help

    Thanks for all your help.

    I found that the threshold is set too low because I spent a binary level with high contrast. Which has much improved the performance of the service.

    I now use segments to identify the characters, because it is a feature that I had forgotten!

    Thanks again!

  • Can I pass a string value to a double digital display?

    I do a test sequence and save each test datas. When I get around one of the tests, I need the string value "BP" to be saved (in double digital indicator) for this particular criterion. Is there a possible way to do it?

    Maybe just use "NaN" instead of "BP". You can store a NaN in the digital indicator.

  • Help with display 7-segments/guest

    Hello, I am a whack-a-mole implementation, and there are a few pieces that I have problems with...

    1. how to do the stop 7 segments to 0 after playing for 60secs?

    2. how to make the game more light upwards the button once the game ends?

    3. replace the boxes option and choose levels prompt the user instead?

    Any help would be appreciated... Thank you...

    You will need to do a few step backwards and think about your code. You do too many complicated things. For example, the loop to stop and the two timer loops can be combined on one. The loops to operate at a speed, not need to measure time, just count fixed iterations!

    Why do you need so many stop buttons? Why do you use such a confusing cluster ranking? Than the number the same as index table for simplicity!

    It's just the toip of the iceberg, there are many more problems. Get rid of the large stacked sequence. You can set the order of execution with the cluster of error.

    1. Start the decrement of the meter at a fixed rate, from 60 and stop at 0. (see attachment).
    2. SUST illuminates whe in (1) the stop condition is reached. Without requiring additional code.
    3. Get a custom context menu dialogue VI tho everything you want.
  • Rebel t2i digital display empty

    My Rebel T2i has a problem where the screen is empty.  The backlight lights up but no menu or fonts of any kind.  I was wondering if anyone has had this problem and how it was fixed.  Many people with this problem but no result that I could find.  Probably don't bother to send repair since the cost is almost what the camera worth?

    Thank you

    Ed refers to the fact that the 'Info' button to scroll through a series of things in option, you do not want to have displayed on the LCD... and a choice in the cycle of the possibilities is to display nothing at all (screen would remain offshore).

    BUT... pressening the 'Menu' button, you have to always bring up the Menu (even if the screen is normally off, it will come to view the menu.)  (Provided the camera actually has power and lights up).

    If she didn't come... ever... then something is broken only one service can fix.

  • Digital display of Visual Basic 6 Datareport

    We have a VB6 application compiled on machine Windows XP (SP3) with many datareports. On some (not all!) RptTextBoxes to format number with 2 decimal places, the data is displayed as 1.000.00 where it should be 1.00?

    Hello

    It suits better the question you have posted on the MSDN forums. Please post your question in the MSDN forums.
    Here is the link of support:http://social.msdn.microsoft.com/Forums/en/categories/

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • VPN - VPN easy hardware Client connects, but no traffic

    Hello

    I have a PIX 515E and 501 acting as a customer of material. Several remote location are connected as a easy VPN clients, a place to connect, but no traffic flows. I went from mode-extension-network client mode and I can connect through other network hosts.

    I don't know why this 501 PIX we're different. There is no ACLs except which is extracted from the station.

    Any ideas where I should look?

    Thank you

    Vince

    A few quick comments:

    1. I don't see 192.168.0.0 is part of this ACL inside_outbound_nat0_acl.

    2. I see an instance of card crypto 40 with "incomplete" crypto card, which is actually not a correspondence address.

    outside_map 40 ipsec-isakmp crypto map

    peer set card crypto outside_map 40 216.27.161.109

    outside_map card crypto 40 the transform-set ESP-DES-MD5 value

    ! Incomplete

    Not sure if it's the current configuration of the pix. If there is an instance of card crypto with an incomplete correspondence address, all traffic will be encrypted.

    Kind regards

    Arul

Maybe you are looking for