[EC] Problema con Libreria Dell Powervault TL2000 - Media Attention

Similar Questions

• DELL PowerVault TL2000 by Ethernet?

  Hi all!

  Need advice how connet DELL PowerVault TL2000 for PowerEdge M1000e via Ethernet?

  Is this possible?

  If not what kind of s-module, we need?

  Hello maojan,

  With the TL2000 using ethernet, you need the iSCSI bridge for the TL2000.  Once you have the bridge installed in the TL2000 and configured, you can use iSCSI to connect your M1000 in the TL2000 via iSCSI. The only other way to connect to the TL2000 is via SAS or FC if you have FC disks.

  Please let us know if you have any other questions.

• Problemas con los los programas windows media codec

  Means - This is a foro Público para as information private as numbers of Teléfono o correo electronico nunca!

  Ideas:

  • Programas Esta having problemas con
  • Los error messages
  • Los recent changes made in su equipo
  • What is tiene tratado did el problema

  Hi juan,

  Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problema con Instalacion del VC4.0

  Hola.

  During the instalacion del vcenter, en el paso to create una database, what el dominio can than of driver exista me o the VM (WS2003 Enterprise Edition) donde tengo el vcenter no esta al dominio, situation are completely falsa. Sometimes he tenido than get del dominio y volverla a poner para as pase al siguiente paso, Por that compares me compares esto? esto cada vez as creo una nueva database,.

  Entonces luego al siguiente paso, todos los procedures what mediante pasar poder me veo obligado a pasar, me compares haber toda database as this created luego consume a poco tiempo of... ago instalando el VCENTER me da a mistake of some of the people created en C:/Docmunt setting / ~ TEmp... Este el error mas o menos, there termina me el proceso instalacion. Por that esto Sera?

  GraciaS!

  Como dice Jose Luis, revisa you DNS config.  vCenter depende una correcta para su buen operation DNS config.

  Además than no haya problemas en you make dominio Active Directory, are not normal as tengas than sacar una Máquina del dominio y luego volver a registrarla.

  Best wishes / Saludos

  -

• Problema con clave del producto

  MI problema are not themselves como activar clave Windows 7. Tengo una vidéoconférence don't con los datos pero no is como hacer para activarla, me dice of Quebec sale una ventana as this product no copia're valido o can be una.

  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• PROBLEMAS CON INSTALACION DEL FSX IN A GATEWAY 64 BIT LAPTOP

  HOLA, SOY USUARIO FS DESDE HACE MUCHO TIEMPO, RECENTLY INCLUDING A LAPTOP GATEWAY 64-BIT Y NO PUEDO INSTALAR EL FSX AS PUEDO HACER AL RESPECTO

  Hi Rogcov,

  Unfortunately, the Windows Vista community is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problema con el polar field indicator

  Hola a tod@s,

  Tengo a problema con el polar route VI indicator, he estado intentado dibujar UN fasor (vector) este empleando VI, he configurado su tamano is colores pero cuando ejecuto el VI none as black me graphics mi fasor (vector), para verificar what he estado introduciendo datos he graficado training in waveform una Onda y aqui obtengo el resultado esperado (Una funcion con seno amplitude fase y frecuencia deseada) , help me could alguien con el problema del indicator polar. I am using LabView 7.1 8.5 y y en versiones both me sucede lo mismo.

  Editor una imagen del diagrama of blocking the graphical grafica y.

  Gracias

  Hello

  Aqui ha UN UN convertacion pictura.  Not soy seguro that're correcto, LEDs 'dt' al anugulo.  Pero, este callida hasta solution, convert el hondo.

  Desculpa, no tengo LabVIEW 7 here.  No will can be extracted using of este, pero the pictura is mostra as quero decir lo.  Buena suerte.

  Los resultos son estranyo (no tengo 'July' , I think it is the process of converting, no correcto are.)

  

• Problema con el useful Red

  Tengo problemas con el red useful. Estoy conectada mediante wifi y of repent sale me el icono of Quebec debo conectarme por cable ethernet. If in ese momento voy a the solo red useful config caught me el useful por cable ethernet. DON'T I already conectarme of forma inalámbrica!

  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• Tengo el mismo problema con Windows server 2008 r2 (x 64) (same problem)

  Quiero recover form security incursions con Windows Server 2003 SBS in Windows server 2008 r2 (x 64), Biogen trabajando con el ultimo parchment http://support.microsoft.com/kb/974674 (ID of Article: 974674 - last review: January 27, 2010 - revision: 2.0) y baje las versiones in Inglés y Español (updated for Windows Server 2008 R2 x 64 Edition (KB974674)) y en ambos casos el message are the same "the change are no aplicable al equipo" el server are UN hp ml350 con una cinta hp dat 72 the same as use para los realize aid for storage. The the CA BACKUP sin problemas con utilizo cinta. Habra mas nuevas plots that only estoy instalando del 27/01/2010. El of y ingles El HOTFIX (http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=974674&kbln=en-us) are only en WS2008 R2 (standard) as yo tengo esta in Spanish. Hace mas of months than any I can recover los datos anteriores... Ayuuuuuudaaaaaa!

  Unfortunately, the Microsoft Answers is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for visiting Microsoft Answers. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problema Scheda Madre dell T20

  Buongiorno, ho no problema con UN T20 (service tag xxxxxx) Server dell, if no accende, slab prove fatte credo sia scheda madre avrei need di UN preventivo by the riparazione.

  Grazie

  Buongiorno, the sto acknowledgements by mail

• Dell PowerVault MD3600i validation error - unable to update firmware - Data:

  Hello

  I have the following problem when trying to upgrade the firmware version of 07.84.44.60 to 07.84.47.60 on my Dell PowerVault MD3600i.

  Assistant firmware upgrade RAID controller module reports the following error

  • Data validation error: the storage Bay cannot be updated one or more host entries in the Module of the RAID 0 controller did not match those of the RAID 1 Controller Module. To resolve this issue, contact a technical support representative.

  Can not find any similar problem on the net, if anyone here can help me please

  There are a few things you can try. If you have configured multiple paths you can remove one of the controllers, wait 5 minutes and then put it back and try to do the update. Or you can try to clear the log of events and then update the Firmware.

  Let me know how it goes and if you have any questions or concerns.

• Incompatibility of Configuration Dell PowerVault 220 s

  Recently, I experienced a power failure on a Dell PowerVault 775N server, which connected a PowerVault 220 s storage device. Once the power has been restored and restarted the server, I get a beep and an indication on the server there is a «Configuration of drives and the NVRAM shift (normal shift)»

  We suspect that the controller card may be bad.  Anyone could help the who may have a similar problem before the experiment and give directions with the resolution of this problem?

  What's still recoverable data?

  Thank you.

  Difference between in the PERC configuration and the configuration on the hard drives, a message is displayed at startup upward:

  "Configuration of the incompatibility of drives and the NVRAM. Run view/add configuration from the Configuration utility option. Press a button to run the Configuration utility. »

  The configuration of RAID arrays is stored in two places: the nonvolatile RAM (NVRAM) of the RAID controller and the hard disk. Following a power failure or configuration change, the configuration in NVRAM now differs from that on the hard drive. Perform the following steps to resolve the issue.

  Note: If at any time you are prompted to initialize the table, do not. Initialization destroys all data on the logical drive. During the initialization process, all data bits are changed to zero.

  1. Press any key to enter the Configuration utility.

  2. in the management Menu, select Configure.

  3. Select view/add Configuration.

  4. two options are present: view disk Configuration and NVRAM Configuration of display. Because the original configuration is stored on the hard disk, select the Disk Configuration view.

  5. check that the correct configuration for the RAID array is now displayed.

  6. press the ESC key. When you are prompted to save the configuration, select Yes.

  7. the configuration is stored in NVRAM on the RAID controller and matches the configuration on the hard disk. When you are prompted, press a key to continue.

  8. press ESC until you are asked to leave. Click Yes to exit.

  9. press on CTRL + ALT + DELETE to restart the computer. The server should now start normally.

  A note more:

  If you don't see not an overview of NVRAM, see option records, trying to erase the configuration...

  Unplug and power off of the PV220. Restart the PERC BIOS, make sure you're on the PERC external and clear configuration. Connect up to 220, power and restart the server, you should now get another set-match and should display disks.

• Dell PowerVault LTO4-120 running under Ubuntu or Mac OS?

  Hello people.

  We must change our Dell PowerVault LTO4-120 on a machine that could be a PC running Ubuntu or even a desktop apple computer running Mac os 10.4.

  The problem is, how would it be possible to get a driver that works?

  I know not how, but on Ubuntu, the pilot acknowledged in st0, but taken 32hours (!) to fill a bunch of 800 GB by using tar - cvf with a block size of 2048 k.

  Does anyone have an idea on the alternative drivers or something?

  Any help would be apreciated.

  
  

• They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Hello

  Its probably an alignment problem - that is, the Panasonic is written outside of the
  able to read DVD computer settings.

  Normally, if you want to create CD/DVD that can play on standard devices (for example
  like the Panasonic) the MASTERED format should be used. Does the Panasonic
  offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
  alignment problem. If the alignment can be defined in fact would cost more than the
  device being aligned (if you could find someone who could actually do).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problemas con Player audio Tunes wont en mi PC windows 7.

  I have a problema con mi programa Tunes.Iba todo good desde lo instaled por primera vez este ano; comparto este player con el Real Player y el v el windows media player than viene por defecto en el ordenador. (Windows 7)
  El problema fue as debi run a comando y desde entonces are imposible open el programa Tunes. He abierto el ordenador en modo seguro is there alerted me that there a problem with the audio Québec impide el open config program.
  He probado muchas options pero no abrirlo can not; He has height actualizarlo, pero aun asi no is tree. The respond plantea windows are recover el sistema y volver a UN punto anterior cuando worked, pero naturalmente that van a deshacer cambios that recently he performed:
  What puedo hacer?
  Cada vez as intento open Tunes el ordenador is bloquea completely.
  Agradeceria una respuesta.
  Agustina

  Hi Agustina999,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx