Edge transport server

Similar Questions

• 2013 Exchange setup/PS will fail because Exchange 2010 SP3 missing on the edge transport server... but SP3 is installed!

  I downloaded the new installer Exchage 2013 CU1 which should allow Installation of 2013 Exchange in an existing Exchange 2010 organization. But already Setup/PS the prerequisite check fails. He know that both my havn't 2010 SP3 Exchange Edge Transport server installed. But that's not true: SP3 is installed on both servers. How to Setup research version and why it might find old entries? And more importantly: How can I make sure that the Organization's Information contains the build good level of Edge Transport servers? I hope that exchanging 2013 in the end is not as Buggy and frustrating as this never ending "can not install because ' Business.

  Hi Golfinho,

  Thanks for the post.

  I would like the season you post your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrdeploy/threads

  I hope this helps.

• FMIS Multipoint Publishing - unpublishes stream Edge transport server

  Hi guys,.

  I am facing a strange problem with a pair of servers will BE implemented with Multipoint Publishing.

  Configuration is the following:

  Encoder > > > > FMIS1 > > > > FMIS2

  When freshly launched, I am able to view the live stream from two servers, however, periodically, FMIS2 unpublishes streams as seen in the log below.

  When this occurs the flow of life is accessible from FMIS1 but not FMIS2. In order to resume the flow live on FMIS2, FMIS1 must be restarted.

  Any help would be greatly appreciated.

  Newspapers:

  2010-09-01 14:31 9244 (s) 2641173 NGA_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FTV_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 BBCWN_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CTI_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CNN_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 NGA_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 BBCWN_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 NGC_1's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FTV_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CTI_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FC_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CTI_3's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 NGA_3's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CNN_3's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 NGC_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 BBCWN_3's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FTV_3's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FC_1 is cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 CNN_2's cancellation of publication -.

  2010-09-01 14:31 9244 (s) 2641173 FC_3's cancellation of publication -.

  Configuration:

  Called when the client publishes

  application.onPublish = function (client, myStream) {}

  trace (myStream.name + "publishes on request" + application.name);

  This is an example of using the publishing feature multipoint to republish

  stream to another instance of the application on the local server.

  If (application.name == "CompanyLive/_definst_") {}

  trace ("Republish the stream" + myStream.name + "/CompanyLive");

  NC = new NetConnection();

  NC. Connect ("rtmp://192.168.1.13/ComapnyLive");

  NS = new NetStream (nc);

  called when the NetStream server has a status

  ns.onStatus = {function (info)}

  trace ("stream status:" + info.code)

  If (info.code == "NetStream.Publish.Start") {}

  trace ("publishes the stream");

  }

  }

  ns.setBufferTime (2);

  NS. Attach (myStream);

  NS. Publish (myStream.name, 'live');

  }

  }

  application.onUnpublish = function (client, myStream) {}

  trace ("cancellation of publication is" + myStream.name);

  }

  I think I got your problem - what is happening you're publishes 7 flow of your encoder to "CompanyLive/_definst_" on your FMIS1. Now what is happening, is that you have code like

  NC = new NetConnection();

  NC. Connect (rtmp://XXX ".") XX. XX.13/CompanyLive");

  NS = new NetStream (nc);

  So when the first flow as reported by your encoder - it started republication. Right after that comes another stream of encoder and now you previous post because she using the same variables that have local scope, is gone for the draw - and it lights up. I hope you got the question.

  The opposite must encode correctly. Just use table to store netconnections and netstream objects and use them accordingly.

  I'll just give you trick here:

  application. NC = new Array();

  application.ns = new Array();

  application. [I] NC = new NetConnection();

  application. NC [i]. Connect "(rtmp://XXX. XX. XX.13/CompanyLive");

  application. NS [i] = new NetStream (nc [i]);

  .. then on etc.

  Please do not take my final code and working on it to write good code - I wrote it bit of haste, but I hope this helps you.

• Security Internet - transport server Edge Expressway

  I was instructed to do research on a Cisco Expressway of hardening Edge transport server.  I have not yet seen the server, but I understand that it has been deployed with the deployment method double nic.  I wanted to see which are typical of the best practices hardening.  For example, I know that I need to limit administrative access to the local network only.  Someone else has configurations they make throughout their deployments?

  Hi John,.

  At the edge of the highway/Expressway VCS can be deployed as a basis for the (legacy) device or application of VM on the server of the Cisco UCS. The edge of the highway/Expressway VCS must be deployed with the core of control/Highway VCS to provide secure firewall courses.

  Advanced Networking (double nic) license is required for the curing of the security of the box.

  You can start on this document on how the box is deployed to best practices.

  refer to Appendix 4 page 54:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-2/Cisco-VCs-basic-configuration-control-with-Expressway-deployment-guide-x8-2.PDF

  Kind regards

  ACE

• I need to ask about web fonts adobe edge, might serve you 'Minion Pro' and 'Enchantress Pro' at our website using CSS?

  I need to ask about web fonts adobe edge, might serve you 'Minion Pro' and 'Enchantress Pro' at our website using CSS?

  Hello mohamed,.

  first of all, I have too much work with CSS, so all screenshots on top you should find in your Version of DW too adapted to your configured language.

  Then, please have a look at my new screenshots. I'm leaving Creative desktop cloud

  

  'Schriften aus Typekit hinzufügen' means something like 'Add Typekit fonts' > here item (items) > Schriften (fonts) >

  

  Once again use "Schriften aus Typekit hinzufügen" ("Add Typekit fonts") and you get to > https://typekit.com/

  You should take a look at "Typekit-Services Agreement" > http://www.adobe.com/products/eulas/tou_typekit/

  Some of the points that will be important for you, you will find:

  2.1 fees and subscription plans.

  2.2 payment for your subscription. The upgrade; Surpluses.

  3.1.2 Web Publishing site. If your subscription...

  ASO.

  Hans-Günter

• Table that stores the information of Transport server

  Hi gurus,
  What is the name of table in the b2b database that stores the transport Server details?
  
  I use Oracle 10g B2B.
  
  Concerning
  AYUSH

  Hi Mary,

  I do not have a facility of 10g here, but if I'm not mistaken not it is table TIP_TRANSPORTSERVER which holds the transport server details.

  Kind regards
  Anuj

• Segnalazione HD RAID 1 - Power Edge 2900 server

  Company Supporto Tecnico,

  He con Power Edge 2900 oggetto della present e misconfigured server RAID 1 ed a RAID 5.

  Da at least one week sul disco 0 (HARD DISK, 146G, SERIAL ATTACHED SCSI, THE, 15 k, 3.5, SEAGATE, 15K) he drove a DX causa con lampeggia cadence regolare, con UN colore arancio.

  Da precisare che sul display del server no device nessun allare, e di fatto he sistema sta funzionando correctly.

  Yet I like to know it tipo di problemática present e quali inizative e necessario h.p.p..

  Speaking saluti.

  Antonio Morrocchesi

  Buongiorno,

  Dal led lampeggiante sembrerebbe arancione it disco che e fits in stato "failed." Per poter fare una precisa del problema più diagnostica, invito form answer it by turns out supporto a pagamento da Dell. www.Dell.com/.../SS

  Saluti

  Marco

• Request detailed POWER EDGE 2900 SERV. TAG 7MQ5H4J [CF]

  Buona.

  Ho need di avere un preventivo TR spesa per sostituzione della batteria del controller raid PERC/6i da sul server in oggetto.

  Grazie in pre-empted

  Buongiorno, the sto contattando by mail.

• Edge of Mirage and file Portal Server

  Hello

  After configuring the transport server Edge of Mirage, everything woks fine with the SSL certificate and the CVD from the internet synchronization.

  But the portal file no longer works from the outside.

  Do I have to install IIS and Web Access services on the Edge transport server?

  Thank you

  Oliver

  It is difficult to achieve because the front door for safety on board is no not part of the domain, but to continue the job file, the server must belong to the domain because the users authenticate against the domain credentials.

• saving VShield edge

  I have problems with my edge transport server.  son of 192.168.10 network and I ping to 15.12.51 network.

  OK, so I can ping a private vlan edge unit 15.12.51.1.

  In addition by edge devices I can ping all my ip on the 15.12.51 network.

  Since, however, a virtual machine on the private wire I can only ping my transport server edge and nothing on the rest of the 15.12.51 network.

  I have nat was an ip address on the network 15.12.51 and changed my firewall by default rule (for testing) to allow all traffic.

  seems to not work.

  I'm trying hard to find some record of the conversation attempt between the virtual machine on the 192 network than on the 15.12

  network, but I can't seem to find any connection on the edge device. Do you know where I can find the logging?

  Thank you

  The simple question is, no way to watch the logging of the edge server. of the receipt of applications, etc.

• About the origin/Edge configuration

  Hello, I'm quite new to Adobe Flash Media Server and have been reading administration guide.

  After reading the information of origin/edge here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  I came across a few questions.

  1. it is said that edge server essentially act as a "proxy" gets all inbound connections, which redirects them to the originating server.

  But I read here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  that basically just edge transport server uses 1 connection initially and ordered that all users who connect. I am an old user of shoutcast/icecast, and this terminology is a little different. Origin/Edge configuration is basically correct relay? An edge transport server relays a stream from the origin server, and ordered everyone still correct?

  So I might have a relatively low origin server and low bandwidth and have 3 edge server to connect to the origin and have about 100 users to connect to each server 3 edge?

  2. This is the question that that concern me the most. Currently I have swf and HTML field restriction to my application on the original server. If I set up an edge transport server it will respect safety (html and swf domain restrictions) set to the correct home server? Or should I re-enter the areas these 2 files on the edge transport server?

  3. when I completely setup my origin/edge servers, will still be able to connect to the origin? Or they will have access on board?

  4. is there a way to limit the number of users connected to a server and after that it caps out, every future connection is then sent to another edge transport server?

  We hope to hear for you guys.

  Thank you!

  It is not that we do not know, is that we have not gotten here yet.

  1. edge/origin does many things.  It is a complete solution or a simple approximation.  Edge tries to take as much load to the server of origin as possible, therefore he handles VOD delivery locally if the media is cached, distributes broadcasts by pulling only once, but redisting, and it multiplexes all incoming connections on the edge more than one (actually two, but that's a minor detail) to the origin by the remote application conveyed. Origin must manage all scripts, is the authority on the content and registration or the Summit meeting point in direct topologies.  If you have a low origin?  Probably not because he is will again fill media content, especially at the beginning, when the caches are empty, constly.  If you run the script, happens to process the script for all customers, including those on the edges, so that can be costly - should be a great machine?  probably not - when caches work correctly, you should see limited on the origin, etc. support.

  2 edge transport server has its own independent area restrictions.  They are not provided to original aboard.  Allows you to create an origin configuration where it accepts that the edges or other machines in your domain and you can target other areas by the edge transport server.  So, if you want them all in honor of these settings, you'll want to change it on all configurations.

  3. an origin server can always handle direct traffic with or without subscription the edges.  I'll make sure that you are up-to-date with the latest version of FMS, especially 3.5.3 when it comes out that we have fixed some bugs in our DVR implementation in this area.  Nothing catastrophic, just want to ensure that you have the version that works best and we are considered correction of problems loading strongly edge based both local basic traffic (especially in a network of 3 level or more, but you're not here)

  4. you can write like this logic in an access adapter - actually it is exactly what it is designed for.  There the number of connections - for the server and the command of redirection at your disposal so write some logic there please.

  ASA

• iDRAC error on PowerEdge R720 (SWC0700: iDRAC is not ready.) The configuration values are not available.

  My PowerEdge R720 started with iDRAC Initialization Error as topic above.

  SWC0700: iDRAC is not ready. The configuration values are not available.

  Noise of FAN after pressing F1 to continue. Please what can I do? It's my edge transport server and it is now off to find out what needs to be done. Please notify.

  Been,

  Network administrator,

  ExecuJet Aviation Nigeria.

  Hello, I'll email you to ask for the serial number. Thanks Marco

• ASA VPN with ISE and different backends WBS for authentication

  Hello

  I have an AAA-problem I hope to have a few problems help.

  The problem ultimately is: how the ASA via ISE send Radius Access requests to different given OTP backends provided a connection to a certain group of Tunnel.

  BACKGROUND:

  I'll try to give you a brief picture of the scenario, this is what I currently have.

  A VPN system (ASA 8.4 (4)) where I let my users to choose among 3 different methods of authentication being

  (1) certificate (on chip card)

  (2) token - token of the OTP (One Time Password provided via the smartphone application: using pledge of Nordic OTP-Edge transport server)

  (3) SMS - OTP token (Nordic OTP - Edge transport server SMS OTP)

  The choice corresponds to different groups of profiles/Tunnel connection.

  Today, all authentication requests go directly to the OTP server and authorization goes directly to the AD via LDAP.

  THE PROBLEM:

  The problem occurs when I try to put in the ISE in the mixture.

  What I obviously (?) would like to do is have all the network authentication/authorization to go through my ISE platform to take advantage of a centralized administration, monitoring etc.

  Again I would need to use data bases different backend such as AD and Nordic OTP - Edge server, but then mandated by ISE.

  For me to be able to know what back-end AAA to the proxy system, to somehow be able to distinguish the incoming Radius Access-requests.

  WHAT WE CALL:

  At the time of the ASA 8.4.3 Radius access request contains 2 new attributes, the name of Group of Tunnel and the Type of customer, when a VPN user connects.

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/ref_extserver.html#wp1802187

  QUESTION:

  The seams, that I can achieve what I want by looking at the access request attribute Radius "Tunnel Group Name" and forward my request to different backends OTP for the authentication part therefore in theory. But, how do I actually go ahead and set that up in ISE?

  I don't see this attribute when I look at the details of Radius Authentication for an authentication AAA of the ASA at the ISE.

  Best regards

  / Mattias

  I think you can hit the following problem:

  CSCtz49846: ISE does not match the condition with VPN 146 Tunnel-Group-Name attribute

  This issue is not specific to this attribute, as shown in the solution shown in the accompanying note

  Workaround

  Ensure that the attribute name does not include a '.' character. This also applies to some of the existing attributes in the dictionary of Cisco-VPN300. Attribute names should be changed so that they do not include a "." character.

• Integration of Lync with VCS - key Option mandatory?

  We implement integration with VCS on x7.2 lync.  Using B2BUA with lync 2010.  Everything works internally with lync configuration, we are only having trouble with lync external participants come and we border routers in the mix.  Direct pools are set up under the name of trust.  We have turned on the highway of the tower.  The calls started from inward of Lync.  VCS sees calls says it is connected, but the appeal does not and then falls normal call clearing.

  My thought for the failure, is that the OCS Collaboration option key has not been added.  But I can't tell in the deployment guide, if this key is necessary only if the encryption is in progress.

  The other area that we now have on the border routers is if The Edge server and the firewall that the Edge transport server may move multimedia traffic through can then reconfigure to allow RTP over UDP and RTP over TCP to pass.

  Can you confirm if the key of the SCO is a requirement for Lync which crosses the highway?  And are there other areas which we recommend why calls set entirely outdoors.

  Hi Kim,

  the SCO cooperation improved option key is necessary for this scenario of appeal, stated at pages 13 and 53 in the Lync to X7.2 deployment guide:

  Calls on a Microsoft Edge server require the VCS have installed improved OCS Collaboration option key because this key allows the ICE to be used for media connectivity

  You are also right that you will need to allow RTP UDP traffic to and from your Edge transport server, as the TURN server on VCS Highway currently does not support the RTP over TCP. If this isn't the case, ice connectivity check between the B2BUA and the Lync client and server Edge fails, which in turn causes to disconnect.

  Hope this helps,

  Andreas

• VCS and design of Microsoft Interoperability

  Hi guys,.

  need help from collective intelligence again.

  I've got VCS and Microsoft Interoperability key installed and correctly deployed interop with Lync - audio and videocalls. Lync federated domains and successfully can call for their users. I have configured the search rules in certain areas (for example, Microsoft.com) neighbor B2B Microsoft box. call begins, but at time of pick up at the bottom it is declining.

  is it possible to appeal to domains Federated Lync via Internet of the endpoint TC recorded on VCS?

  You try to call the Lync federated users from your Cisco VCS registered endpoint? Have you configured the settings of the ROUND and for VCS configuration on the Edge transport server?