Editable interactive report. To change the list column dropdown type filter.

Similar Questions

• Interactive reports will change the order of columns

  Hi all
  
  Have experienced this for the 3rd time now. The other times I just create a new report with the request in the order you wish to fix. But it starts to become annoying now...
  
  When I use the arrows to change the column order on my reports interactive nothing happens when running. The new order is saved and appears that way in design mode, but does not change the order on the report.
  
  Please let me know if you know how to solve this problem, or if Miss me just something really obvious.
  
  Thank you!
  K

  Hey,.

  Changing the order in the attributes report is more an effect, since the default report parameters overwrite it.

  If you want to change the order of the columns, you must go through the menu actions of the interactive report, then choose the column selection menu item, change the order and press ok.

  Then save this order order by default, you go to the action menu again and choose save report option this time, select "primary" or "Save as default" depending on your version of apex (this option is available only if you are connected as a developer in the generator of the apex). Then press the ok button again.

  Other users will only see the changes if they press the reset button on their version of empathy.

  I hope this helps.

• Interactive report based on the hidden column cell color

  Hello

  APEX 5.0.1 used here.

  How can I set the color of a specific cell (or column) based on a hidden column?

  Seems the link that I can't use the built-in feature because I need the custom color returned by my request.

  I tried to set the color with javascript by iterate over each line, by taking the value. text() of the color column and value

  This color-specific cell. It works, but it requires the column is visible.

  A column containing a hexadecimal value of the color does not look good...

  I tried to hide / display: no column complete but this messes up the layout.

  THX

  the force says:

  APEX 5.0.1 used here.

  How can I set the color of a specific cell (or column) based on a hidden column?

  Seems the link that I can't use the built-in feature because I need the custom color returned by my request.

  I tried to set the color with javascript by iterate over each line, by taking the value. text() of the color column and value

  This color-specific cell. It works, but it requires the column is visible.

  A column containing a hexadecimal value of the color does not look good...

  I tried to hide / display: no column complete but this messes up the layout.

  Specify the color of cell required using the hidden column and a data attribute to the property Expression of HTML in the column:

  #VISIBLE_COLUMN_ALIAS#

  Apply a static ID of the visible column to serve as a selector, jQuery, and you can access the invisible color value in your JS code in dynamic action to run the JavaScript Code using the dataset property.

• Interactive report conditional change link

  Hello Expert,
  
  What I want to do is, interactive report should show the entire file on the table, but it should not show the link edit against the id of the record if this particular record id is present in table B.
  
  For example: .
  Table A
  
  RECORDID customer balance name address
  Sam 102 200.00
  Matthew 104 150.00
  106 James - 522.00
  
  
  Table B
  
  CREATEDDAT USERID RECORDID
  James 106 24 March 09
  
  In this case, the interactive report should show all three records in table A. However, it should only show the record edit link against RECORDID 102 and 104. I don't want to edit record link against 106 RECORDID.
  
  
  
  SAGAR

  Hello

  Mmmm, I can't get the first job or... so we will pass to the last option... something like:

  select case when nr is null
         then null
         else  '<a href="'
                    || 'f?p=&APP_ID.:10:&SESSION.::&DEBUG.::'
                    || 'P10_DEPTNO:'
                    || dept.deptno
                    || '">'
                    || ''
                    || ''
         end link
  ,      dept.deptno
  ,      dept.dname
  ,      dept.loc
  from dept
  ,    ( select deptno, count(*) nr from emp group by deptno ) emp
  where emp.deptno (+) = dept.deptno    
  

  Change the columns of numbers and link to your own page...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Conditional display of interactive report based on the different SQL query

  Hello
  
  I have two drop-down list at the top of my page and below I have an interactive report.
  Based on the selection of the user from the drop-down list values, interactive report should change based on different SQL queries.
  
  Is it possible to have different SQL queries based on the drop-down list values and generate interactive report based on that?
  
  Thank you

  Hello

  You can't have IR based on function returning the query as you can have classic report

  But here is a workaround
  http://www.oracleapplicationexpress.com/tutorials/71

  Kind regards
  Jari

• Interactive report - no research on all columns

  Hello
  
  I have following question:
  
  I have an interactive report based on a query that contains a column that displays data and an image:
  
  Example:
  SELECT Col_a,
  col_b,
  col_c,
  "< img src =" #WORKSPACE_IMAGES #small_image.png ">" col_img "
  FROM my_table;
  
  In my col_img column properties I put the 'view Type' to "Column of report Standard", it will display the image.
  
  But when I search in my interactive report for example the small Word, it will display all of the columns there are on each line the small word (from my small_image.png).
  I already tried to set in the properties of the column col_img ' allow users to:' everything off. It works I can't search only on the col_img column. So, it's ok.
  
  But when I choose in the field of research for 'Search on all columns' it also research the col_img column, what I want.
  
  Is there a solution for this problem?
  
  
  THX,
  Davy

  Hello

  I have not fully tested this, but you could test.

  Go edit the column and set the condition type "ask!" = Expression 1"and for the Expression 1, enter APXWGT

  Kind regards
  Jari

• How to change the list of bookmarks

  Where can I find instructions to change the list of bookmarks?

  You can change the bookmarks in the bookmarks (library) Manager.

  • Bookmarks > show all bookmarks
  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

  Just to be sure you understand how this works:

  • By clicking on the star in the toolbar navigation go to bookmark the page in the "Unsorted Bookmarks" folder and the star lights in blue to show that
  • Bookmarks > 'Bookmark this Page' (Ctrl + D) going to bookmark the page in the folder of bookmarks Menu (you will need to confirm that)
  • 'Bookmark this Page' is accessible via the context menu in the area through the bookmarks menu or navigation in the menu or Firefox menu button drop-down bar (Alt + B)
  • If the URL in the active tab is set bookmark and the star is highlighted blue and then click the star highlighted or use "Bookmark This Page/Edit this bookmark" (Ctrl + D) to change the properties of the bookmark as the name and the location and move the bookmark to another folder or delete the bookmark

• Spam: how to change the list of junk e-mail in iPad

  How to change the list of junk e-mail in iPad

  If your question is about - how to indicate whether or not an e-mail is sent to the junk e-mail folder-

  Your best bet would be to do it on the web portal of the email provider (e.g. for Yahoo it would mail.yahoo.com)

  There is usually a button or switch to designate mail "Junk" or "not junk".

  If your question is rather modify the list itself

  Mailbox - junk e-mail - Edit button is at the top right

• link to an interactive report AND apply the filter for 2 items.

  Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.

  Here is my code

  I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.

  A filter = > works very well

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Scenario 2:

  Two filters = > does not

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Thanks in advance

  actually the syntax wrong values in the syntax of the passes to several elements.

  is

  f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678

  Use above scenario and verification.

  Go

• ThinkPad Tablet 2 BIOS: I can't change the list of boot devices. Help, please!

  Hello community,

  I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »

  What can I do?

  Kind regards

  The problem is solved!

• I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?

  To change the name of the service, you can use (as a DBA or SYSDBA)

  SQL > alter system set service_name = '';

• Cannot change the list of participants

  I'm trying to change the list of participants, but I get a message saying that the "system is unable to process' .  Any ideas?

  Thanks for responding. My role was that of the host. In any case, I'm finally able to change the list of participants. I was told that Adobe Acrobat Connect Pro is 'down' for a day or two, and it's probably why I couldn't change the list. It seems to be okay now.

  Thank you

  Suzanne

• Change the first column seen in the datagrid by code?

  Hello

  Is anyway to change the first column in a DataGrid using action script? I mean, for example, think I have 10 columns, only 3 are seen (0,1,2). I just want to have a button to change the first column view. Thus, for example, if I press it, 1.2, and third column will be those that is displayed in the datagrid control. I need to emulate the same thing that the scroll bar when you drag in a datagrid, but instead of letting the scroll bar does that automatically, I want to "scroll" datagrid manually.

  Moreover, is anyway through datagrid children and hide the scrollbar manually?

  Thanks in advance,

  Aron.

  horizontalScrollPolicy

• PLS-00597: expression "v_record" in the list is wrong type

  Hi experts,
  
  I'm working on
  
  Oracle Database 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit
  
  I have 2 Sp allows to call SP1 and Sp2.
  
  SP1 now have an output of the Ref cursor. and I get this output to my SP2. Output slider Ref of SP1 have column 4.

  create or replace procedure sp2 (out_cur out sys_refcursor) is
  type record_typ is record(value_date     date,
                            name           varchar2(20),
                           category        varchar2(20),
                            amount         number);
  
  type tbl_typ is a table of record_typ;
  
  v_record      tbl_typ;
  out_cur1    sys_refcursor;
  
  begin
  
            Sp1(:out_cur1);
           loop
            fetch out_cur1 into v_record;
            exit when out_cur1%notfound;
           insert into tmp_tbl values(v_record.value_date, v_record.name, v_record.category, v_record.amount);
         end loop;
  
     open out_cur for
       select * from tmp_tbl;
  end;

  and I got the error PLS-00597: expression "v_record" in the list is wrong type
  Please suggest me where I am doing wrong.
  
  Thank you much in advance.
  Ritesh

  Hello

  Well you just put your type declaration in each stored procedure to refer to him...

  create table tmp_tbl
  (       value_date     date,
          name           varchar2(20),
          category        varchar2(20),
          amount         number
  )
  /
  
  CREATE OR REPLACE PROCEDURE  sp1
  (out_cur out sys_refcursor
  )
  IS
  
  begin
  
      OPEN out_cur FOR
      SELECT
          sysdate         value_date,
          'Bravid'        name,
          'Ape'           category,
          1               amount
      FROM
          dual;
  
  END;
  /
  
  CREATE OR REPLACE PROCEDURE sp2
  (out_cur out sys_refcursor
  )
  IS
      TYPE record_typ is record(value_date     date,
                            name           varchar2(20),
                           category        varchar2(20),
                            amount         number);
  
      v_record      record_typ;
      out_cur1    sys_refcursor;
  
  begin
  
           Sp1(out_cur1);
  
           loop
            fetch out_cur1 into v_record;
            exit when out_cur1%notfound;
           insert into tmp_tbl values(v_record.value_date, v_record.name, v_record.category, v_record.amount);
         end loop;
  
     open out_cur for
       select * from tmp_tbl;
  
  END;
  /
  

  HTH

  David

• How to replace the interactive report '-' for null with white columns fields?

  The reports interactive one places '-' for null column fields. In the classic report, column null fields remain just as a draft. Y at - it a setting to change how many interactive reports display columns null fields? I would prefer that it be display as the classic report and leave the fields to null as a draft column.
  
  THX
  
  Published by: jngoracle on July 24, 2010 22:43

  Hello

  Will modify your report interactive report attributes.
  In the paging section, you can change attribute "see the Null Values as".

  BR, Jari