eDrive / TPM

Similar Questions

• X 220 eDrive

  Hello

  can I use the eDrive on my ThinkPad X 220? I confirmed she has TPM v1.2, but apparently also UEFI Version 2.3.1 (http://technet.microsoft.com/en-us/library/hh831627.aspx). My reported "Version of UEFI BIOS" is 1.39. These figures are comparable (one is specific to Lenovo, it is not the case, I guess), so that e-drive is not possible on my device? Or how can I find out, what Version of UEFI Lenovo "UEFI BIOS" is from?

  And Opal drives work even on the slot mSATA?

  I also found this:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/win8beta_8det8059.txt

  The version number is not even close to 2.x and yet it supports eDrive? Could I upgrade to this version of BIOS and use it? Or 1.39 includes changes of 1.29 has, anyway?

  Thank you very much for your help!

  Philipp

  Can I use the eDrive on my ThinkPad X 220?

  Yes. I use a Crucial SSD SATA MX100 with X 220 hardware encryption 1.29 has and eDrive BIOS is fully supported by Windows 8.1.

  These figures are comparable?

  Laughing out loud

  How can I find out, what Version of UEFI Lenovo "UEFI BIOS" is from?

  This question was asked several times over the years and so far no one has offered a response.

  And Opal drives work even on the slot mSATA?

  I expect so.

  The version number is not even close to 2.x and yet it supports eDrive?

  Fix. As mentioned in the description of 1.29 a has been for support to the beta program. Features added were to test and not guaranteed to be supported in the BIOS later releases.

  Could I upgrade to this version of BIOS and use it?

  Yes, just downgrade to it.

  Or 1.39 includes changes of 1.29 has, anyway?

  Not according to the changelog, but since you're already on 1.39, try for yourself before the demotion to the 1.29 has. 1.29 A works for me so I have no reason to upgrade.

• MacBook with TPM

  Hello

  I have a MacBook, and I discovered that they don't have any TPMs.
  Is there some MacBook with TPM?

  There is my laptop:

  MacBook Pro (17-inch early 2011)

  MacBook Pro (retina, 15 inches, end of 2013)

  MacBook Air (13-inch mid-2013)

  MacBook Air (13 inches, beginning 2014)

  MacBook Pro (retina, 13 inch, mid-2014)

  MacBook Pro (retina, 13 inches, early 2015)

  MacBook Air (11 inch, early 2015)

  MacBook (retina, 12 inch, early 2015)

  I watched "OVD" in the dictionary of Apple app and found these possible meanings related to technology (there are quite a few others not related to technology).

  • Technological protection measures
  • Tivoli Provisioning Manager
  • Total productive maintenance
  • Trade promotion management
  • Trusted Platform Module
  • TPG Telecom

  As you can imagine, I had a challenge determine which one you're talking about.

• Jet 7 stuck to clear TPM [Yes] [no]

  Successfully done an install of Windows 10, having strange problems and tried a reset of the device. Took awhile to get to 100%, and after it reboots it is stuck to a black screen with text of the blue/white box asking clear the TPM. I can't make a selection by tapping on the Yes or no selections does nothing, Yes is currently highlighted in black.
  
  I tried power + volume up + lower the volume and power it still powers up on top of the same screen.
  
  I let the battery run down, now, but if anyone has a suggestion, I'd be happy. Thank you!

  Here is the method that worked for me without adapter OTG.
  
  Unplug the machine and turn it off. When off, press on and hold power, volume +, volume - for about 5 seconds. Who will launch a reload BIOS and when completed the normal reset for windows 10 procedure will continue.
  
  Good luck!

• HP Elite X 2 1011 G1 compressed: secure with BCU TPM activation error

  Hi, I am trying to activate the TPM secure with BCU, but every time I get this error at startup

  "MUD embedded controller data are invalid then that MPM is locked.
  Please MPM to unlock and lock again to capture data of valid MUD. "with accept and 10 - > 0 counting down.

  -I am able to change the other settings of the BIOS with the BCU, but not of TPM.

  -the BIOS password

  -J' I reset the default bios settings

  This is the file I used for config

  BIOSConfig 1.0
  Security level of TPM device
  * Change
  View
  Hide
  TPM Embedded Security security level
  * Change
  View
  Hide
  BONES of TPM security level management
  * Change
  View
  Hide
  Reset the TPM secure of operating system security level
  * Change
  View
  Hide
  TPM reset to the factory settings
  * No.
  Yes
  Reset the TPM security of OS
  Disable
  * Select
  BONES of the TPM Management
  Disable
  * Select
  Activate the TPM on next startup
  Disable
  * Select
  TPM device
  Hidden
  TPM 1.2
  * TPM 2.0
  TPM activation policy
  * F1 at startup
  Allow the user to reject
  No prompt

  And it is the newspaper (after the second execution of the script, all the parameters have been updated in the first inning, but TPM activate next startup update every time I run the script)

  19/07/2016 11:25:22.240764 | 9040 | Definition of | HP:hared:treamLog:treamLog. Severity of log level > = Info
  19/07/2016 11:25:22.240764 | 9040 | Info | HP:hared:treamLog:treamLog. BEGIN.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | * HP c. 4.0.15.1 Bios Configuration utility *.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Platform: 2009 - HP Elite x 2 1011 G1 compressed
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | BIOS version: 1.13 16/05/2016
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Manufacturer: Hewlett-Packard
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Computer name: CL103009999204
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Serial number: 5CG55264Z8
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Unicode supported password: Yes
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS: Microsoft Windows 10 Enterprise 64-bit
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS version: 10.0.10240
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Command line: [BiosConfigUtility64.exe / set: new.repset /cpwdfile:12345678.bin / verbose/l]
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:23.022093 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "password successfully reading the file" / >
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation 'TPM Device security level' with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM Embedded Security security level' with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation "OS management of TPM security level" with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting "Reset of TPM of operating system security level" with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM reset to the factory default values' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full setting 'Reset the TPM for OS' 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of "OS management of TPM" layout with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting 'Enable the TPM on next boot' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full adjustment "TPM Device" 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Riddled with political 'TPM Activation' attitude 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Read the 10 file settings.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Apply all the settings of the BIOS
  19/07/2016 11:25:26.350584 | 9040 | Info | biosconfig::FileSettings:ApplySettings | In 'Device TPM security level' changeStatus = 'skip '.
  19/07/2016 11:25:26.366188 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Embedded Security security level' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.381834 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'The OS level security TPM Management' layout changeStatus = 'skip '.
  19/07/2016 11:25:26.417235 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "Reset of TPM of operating system security level" changeStatus = 'skip '.
  19/07/2016 11:25:26.439250 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'TPM reset to the factory default values' changeStatus = 'skip '.
  19/07/2016 11:25:26.458811 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Reset of the TPM for OS' changeStatus = 'skip '.
  19/07/2016 11:25:26.475825 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Implementation changeStatus "OS the TPM Management" = "jump".
  19/07/2016 11:25:26.571695 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Enable the TPM on next boot' changeStatus = 'pass' returnCode = 0 oldValue = newValue 'Disable' = 'enable '.
  19/07/2016 11:25:26.591711 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "TPM Device" changeStatus = 'skip '.
  19/07/2016 11:25:26.614732 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Activation strategy' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.642752 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Processing parameters: 10, errors: 0 warnings: 0, was ignored: 9, succeeded: 1
  19/07/2016 11:25:26.649256 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "no error occurred" / >
  19/07/2016 11:25:26.649256 | 9040 | Info | HP:hared:treamLog: ~ StreamLog | End.

  See you soon

  I noticed that using TPM 1.2 does not give me this problem, so I went to that and everything was good. I expected that TPM 2.0 was less probematic, but it is not true.

• Activate the TPM on Tecra Z40

  I have a number of Tecra Z40 I'm setting up a client for a deployment of Windows 8.1. They have a manufacturers mish mash and so far I left Toshiba because it seemed not as suitable for companies like HP and Dell.

  Other manufacturers have mechanism for handling the BIOS so I'm after smilar tool

  did someone familiar to a tool that I can run TPM for a build process?

  Thank you

  Usually, you can change the settings of TPM in the BIOS...
  On Toshiba laptops, you can also find a preinstalled software Toshiba HWSetup as Toshiab Security Assistant.

  These own Toshiba tools offer different options that are also in the BIOS.
  The TPM module must be listed using one of the tools mentioned

  Here check the box of "security assistance".
  https://support.Toshiba.com/support/...tentId=3368363

• Disk on Tecra M9 with TPM chip secured by password

  I got my HDD on laptop TECRA M9 - 12R by password (I know the password).
  On the laptop's motherboard was broken.

  I'll bring my laptop in for repair. They will change the old broken motherboard again.
  The Infineon TPM chip on the motherboard is.

  No on the repair service can tell me, if I unlock my HDD and get my data with the new motherboard. I read, that the TPM chip have certificate and I can't unlock HDD on computer with another TPM chip, that the HARD drive has been locked.

  Where is the real?
  Can I get my data with the new motherboard?

  > Person on repair service can tell me, if I unlock my HDD and get my data with the new motherboard. I read, that the TPM chip have certificate and I can't unlock HDD on computer with another TPM chip, that the HARD drive has been locked.

  I think you should be able to unlock the HARD drive using another motherboard with the same TPM.
  But I also recommend you back up the data from the old HARD drive to be on the safe side

• Tecra R10 - TPM is locked after the wrong password

  Hello

  I already turned on TPM on my Toshiba Tecra R10. Problem is that I entered wrong password so the secure TPM is locked, it is possible to unlock the TPM without waiting several hours (automatick unlock the TPM)?

  Thanks for any response.

  Dalibor

  Hello

  Have you checked the "TPM guide information line" in the folder utilities Toshiba?

  I found this info on TPM:
  TPM offers a feature to create and define the multiple encryption keys, certificates, and passwords.
  Once set, make sure that the passwords are carefully stored and encryption of files is saved! If these settings are lost or forget, encrypted using the TPM module files cannot be decrypted and encrypted data is not accessible!

  I think that if you forgot the password and didn't create a token, then you will not be able to rest the password.

  But check the line of TPM information guide that should be stored on the laptop.

• Security Infinion TPM compared to MS Office 2007 (beta)

  I asked this question to Infinion society ' investigation: I use a Tablet Toshiba M400, Infinion TPM installed.» I tried Office 2007 beta, but in Outlook I can only read my headers of the message body is empty. Can help you to adjust Office 2007 settings? »
  It was there response: "Dear Mr. Rijkse, we thank you for your email regarding the TPM module. We're sorry, but we are not able to respond to your request. Please see this request to your PC reseller or the hardware manufacturer. It will be able to process your application faster and more individually. Our distribution system only allows us to support selected computer manufacturers. Best regards, Infineon Technologies Customer Care Services. »

  I installed MS Office 2003 again and Outlook 2003 works well. But I still want to use MS Office 2007, can someone help me with this problem.
  What about Ruud Rijkse
  [email protected]

  Hi Ruud

  Office 2007 is not known to me, just 2003, but from your description, it must be some setting wrong. Have you checked all the possibilities in the advanced settings?

  Incidentally: this question is not phone specific and you need to contact Microsoft on every specific problem of Microsoft.

• Elite x 2 1012: TPM (0xb0000121) authentication failure

  At the start of my Elite x 2, the system starts with the HP drive encryption. I have several options to connect:

  -With the help of fingerprints (works and reported is correct)

  -Password (works and reported is correct)

  -Spare key with three secret questions (works and reported is correct)

  But in the end, none of the three options makes the system startup. The error I see is:

  Failed authentication TPM (0xb0000121)

  So, after a month of good work, the device now all of a sudden is 'dead' and I can't do anything with it.

  In addition to being a businessmodel, I don't understand what happened here and how it is possible for a device that should be reliable...

  Anyone who can give me a hint?

  The elite has been returned to HP and they didn't know how to solve. E device has been replaced. A big, big, defect of the appliance. It is not reliable. No HP for me, unfortunately.

• Satellite U200-181: How can I check if the TPM Module is present

  How can I check Trusted Platform module is present or not?

  Hello

  The TPM module (trusted platform module module) configuration is done in the BIOS Setup program, and this feature is available only with certain models.

  I put t know if the U200-181 is favorable or not, but you can check it out yourself.
  Safety controller parameters should be available in the system BIOS Setup on the second site.
  If the device supports the TPM module, you should see the switch to enable or disable this security option. Generally according to the default TPM module is disabled.

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• Z230 Tour: my desktop computer HP he TPM 1.2 support?

  My company wants me to encrypt hard drives on all desktop computers. All are running Windows 10 Pro (x 64). When I try to enable Bitlocker encrypt the drive it says that I don't have a TPM 1.2 module.

  My questions:

  1. my turn Z230 there a TPM chip on the motherboard?

  2 is in the affirmative, UEFI/BIOS setting must be changed to make the TPM visible by the operating system?

  3 HP has a disk encryption program full that I can use instead of Bitlocker?

  All comments and suggestions are greatly appreciated!

  Hello:

  According to this link, it's... see page 17, unless you live in a country where prohibited by law.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx%2Fc04111362.PDF

  You should be able to see that this one listed in Device Manager under the category of security devices.

  The TPM module is enabled by default on all of my PC HP's business office and it appears in Device Manager under the category of security devices.

  If you don't see it, I check the Security menu in the BIOS of your PC and see if it allow it, or reset the BIOS to its default values and it must be automatically activated.

• Satellite A100 - 712 (PSAA9E) - No. TPM or TPM has problem

  Hi all!

  Once again, the same problem with the update of the BIOS...

  Quotting there
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=121750#121750

  "I decided to update the BIOS on my Toshiba laptop Satellite A100 - 712 PSAA9E to the latest version available (6.00).

  The installation is completed normally (went through all the steps, wrote to all 21 blocks) without any error, but after the reboot, I noticed that it is now displayed at the Toshiba logo screen.

  The blue progress bar moves twice but got caught then about 1/3 of the way through.
  To see how bad the damage was, I Press esc at the beginning of the POST and saw that it gives me the right Version of the BIOS (6.00).

  He also told me that "no TPM or TPM has problem" and "2039 M RAM Passed system."
  It then displays the message "Press to enter SETUP" (which makes the message disappears, but otherwise doesn't do anything.

  If I press F2 during the Toshiba logo screen, it replaces the bottom with "Please wait" message and nothing happens"

  Sollution "go to ASP" in the footsteps of sollution.

  Is there someone who can explain how to use the crisis to Phoenix (PCD) disk?
  I did floppy of PCD, replaced BIOS. WPH with my version of BIOS.

  After pressing WIN + F and on floppy power begins to work and beeps is my note. After 1 minute - all freez... Same thing with bios.bak - old version of my BIOS made after the beginning of Winphlash.exe...

  Wayting for the answer!

  Hello

  I posted this already in another view about a similar BIOS problem.

  To me, it seems that something was wrong during the process of updating the BIOS, and if you're lucky, the flashing of the ROM BIOS might help you.

  As far as I know that you would need a BIOS version of special rescue and the drive to reflash the module ROM that you do not and therefore, you will need to contact the ASP in your country for assistance.

  This isn't a real solution that you expect, but it s an advice how to get a solution
  This is why I would recommend contacting the ASP in your country for the control of the laptop

  Good luck buddy