Effect on dark fiber - transceiver module option?

Hi all

You want to order two WS-C3750X-24 t-S with modules of services C3KX-SM - 10 G in order to apply the effect between two data centers using dark fibre (fiber). Distance between data centers is about 17 Km.

Can I use the GLC-EX-SMD module on the two location?

Thanks in advance,

Ah, I see - I thought you meant a fiber PAIR - not a single strand.

He's right - the GLC-EX-SMD requires a pair of single-mode duplex fiber. So if you have only a strand that will not work.

The BX type that allows you to use a single strand are compatible to reach the shorter (up to 10 km) application with the 3750-X. 40 km variants are NOT compatible with the X-3750.

Tags: Cisco Network

Similar Questions

  • 2960 switch configuration for test of dark fiber

    Hi guys

    IM new in network. We have a dark fiber, tests aside > dark fiber > side (B) to test the fiber link, im using a switch 2960 and configure a vlan - vlan 31 and I assign port 1 to switchport access vlan 31. I'm not sure whether the switch need to configure a default gateway, which is the other tat switch side b. I'm not able to ping to my pc either [port 2/0/1]. the fiber link that connected to the switch's port 2/0/49]

    can you help me to check if this configuration is correct?  Here's the running configuration. TX a lot for the help.

    #sh SRO-SWITCH-TEST run
    Building configuration...

    Current configuration: 2679 bytes
    !
    version 12.2
    no service button
    horodateurs service debug uptime
    Log service timestamps uptime
    encryption password service
    !
    SRO-SWITCH-TEST hostname
    !
    boot-start-marker
    boot-end-marker
    !
    enable password 7 110A1016141D5F01072728
    !
    username admin privilege 15 password 7 00071A 150754
    !
    !
    No aaa new-model
    clock timezone 8 MYS
    switch 2 supply ws-c2960s-48ts-l
    !
    !
    !
    !
    !
    pvst spanning-tree mode
    spanning tree extend id-system
    !
    !
    !
    !
    internal allocation policy of VLAN ascendant
    !
    property intellectual ssh version 2
    !
    !
    interface FastEthernet0
    no ip address
    !
    GigabitEthernet2/0/1 interface
    switchport access vlan 31
    switchport mode access
    No auto mdix
    spanning tree portfast
    !
    interface GigabitEthernet2/0/2
    !
    interface GigabitEthernet2/0/3
    !
    interface GigabitEthernet2/0/4
    !
    interface GigabitEthernet2/0/5
    !
    interface GigabitEthernet2/0/6
    !
    interface GigabitEthernet2/0/7
    !
    interface GigabitEthernet2/0/8
    !
    interface GigabitEthernet2/0/9
    !
    interface GigabitEthernet2/0/10
    !
    interface GigabitEthernet2/0/11
    !
    interface GigabitEthernet2/0/12
    !
    interface GigabitEthernet2/0/13
    !
    interface GigabitEthernet2/0/14
    !
    interface GigabitEthernet2/0/15
    !
    interface GigabitEthernet2/0/16
    !
    interface GigabitEthernet2/0/17
    !
    interface GigabitEthernet2/0/18
    !
    interface GigabitEthernet2/0/19
    !
    interface GigabitEthernet2/0/20
    !
    interface GigabitEthernet2/0/21
    !
    interface GigabitEthernet2/0/22
    !
    interface GigabitEthernet2/0/23
    !
    interface GigabitEthernet2/0/24
    !
    interface GigabitEthernet2/0/25
    !
    interface GigabitEthernet2/0/26
    !
    interface GigabitEthernet2/0/27
    !
    interface GigabitEthernet2/0/28
    !
    interface GigabitEthernet2/0/29
    !
    interface GigabitEthernet2/0/30
    !
    interface GigabitEthernet2/0/31
    !
    interface GigabitEthernet2/0/32
    !
    interface GigabitEthernet2/0/33
    !
    interface GigabitEthernet2/0/34
    !
    interface GigabitEthernet2/0/35
    !
    interface GigabitEthernet2/0/36
    !
    interface GigabitEthernet2/0/37
    !
    interface GigabitEthernet2/0/38
    !
    interface GigabitEthernet2/0/39
    !
    interface GigabitEthernet2/0/40
    !
    interface GigabitEthernet2/0/41
    !
    interface GigabitEthernet2/0/42
    !
    interface GigabitEthernet2/0/43
    !
    interface GigabitEthernet2/0/44
    !
    interface GigabitEthernet2/0/45
    !
    interface GigabitEthernet2/0/46
    !
    interface GigabitEthernet2/0/47
    !
    interface GigabitEthernet2/0/48
    !
    interface GigabitEthernet2/0/49
    switchport access vlan 31
    switchport mode access
    Nonegotiate speed
    spanning tree portfast
    !
    interface GigabitEthernet2/0/50
    !
    interface GigabitEthernet2/0/51
    !
    interface GigabitEthernet2/0/52
    !
    interface Vlan1
    no ip address
    Shutdown
    !
    interface Vlan31
    Description OFFICE SRORO
    IP 192.168.31.250 255.255.255.0
    !
    IP http server
    IP http secure server
    !
    Line con 0
    line vty 5 15
    !
    end

    SRO-SWITCH-TEST #.

    Hey the config looks ok just disappeared locally pointing to the other switch, default gateway as you say

    PC must be set with the 192.168.31.250 gateway vlan 31 and have a static ip address in the same range and same subnet

    Make sure that your vlan 31 is to the top/top

  • Hallo, ich kann unter effects EIB LR 6.3 die Option "Dunst entfernen" nicht find. Kann mir sagen das liegen mag woran someone?

    Hallo, ich kann unter effects EIB LR 6.3 die Option "Dunst entfernen" nicht find. Kann mir sagen das liegen mag woran someone?

    Hi holgerk,

    Dehaze feature is only available for the CC with Lightroom version (on subscription) and does not support the only Lightroom.

    Kind regards

    Claes

  • can I use both optical and fiber sfp modules?

    Hello

    I have 2 stacked 3548 P PowerConnect switches. The top switch got uplink fiber of 1 MM (G1) to another switch in a different building. If the top switch has 1 free uplink port and the lower 2 switch free uplink ports. Recently, we bought 2 servers Poweredge R620 and I would like to connect them to the Gigabit ports. The 'normal' switch ports allow only 100 Mbit/s, so I plan to buy 2 modules SFP 1000Base-T (for copper) to connect to them.

    Is this feasible? Can I use G2 on the top switch for SFP 1000Base-1 T? Is this allowed?

    Kind regards

    Erik

    Yes, it's quite feasible. The connection will be configurable the same 100 Mbps ports. Here is a link to the part number for the 1000Base-T transceiver.

    http://bit.LY/1JI5MMe

    See you soon

  • Investigation on compatibility of combine fiber HP Module.

    I have a Cisco switch s 2960 PoE installed.

    I was wondering if the fiber HP #AJ718A ( http://h30094.www3.hp.com/product/sku/3790470 ) module is compatible with it.

    If it is compatible, is there much difference between it and the cisco GLC-SX-MM?

    Thank you

    I was wondering if the HP Fiber module #AJ718A   ( http://h30094.www3.hp.com/product/sku/3790470 ) is compatible with it.

    No, it won't.  You insert the SFP in a Cisco 2960 S and the port goes into 'err - disable' until you remove them.

    is there much difference between it and the cisco GLC-SX-MM ?

    Not a lot of difference.  There are only a few FPS manufacturers that provide components for the major manufacturers like HP and Cisco.  The difference is that Cisco has inserted a brand Cisco SFP IDPROM algo.  The unit will interrogate the component and if the extracted from the IDPROM hash values do not match, then the port goes in "err - disable.

  • what maximum of support of fiber cable module C3KX-NM - 1 G

    3560 x that uses with module C3KX-NM - 1 G, the question is: what is the maximum length of the fiber cable supported? Thank you

    This isn't an easy question to answer.

    First of all, he should know what kind of FPS uses the client: SH, LH, ZX, ER, etc..

    Then, you must take into account the thickness of the cable: OM1, OM2, OM3 OM4.

    Go HERE and look at Table 1.

    Be sure to note our useful messages.

  • Bug?  In Mac LR5, develop module, option + slider off the right panel!

    Hold down the option (Mac LR5) with cursor key causes all right panel remove

    In the develop module, I used to be able to hold down the option key while adjusting a slider, giving some additional features in the control panel section.  (To see the extent of masking in the Panel group of detail, in black and white, for example)

    Now all of the panel loose and I can't drag, instead the Panel moving around th LR5 workspace. While I move unintentionally Panel, there is a blue border that appears around the Panel.  See the screenshot.  If anyone has had this problem, and if so, could you remedy this?

    lr5.jpg

    Thanks to the kiwi Geoff and John Wallter for assistance.  Move the preference file doesn't solve the problem, but that made me think.  I had recently installed a Mac application called Flexiglass, which is a Mac Windows Management tool.  I left that program and THAT fixed my problem.

    Thanks again!

  • Develop module options simply missing

    I'm new to Lightroom - just downloaded v.4 a few days ago and love it.  Earlier, I installed OnOne presets (free package recommended by the site Web of Lightroom). When I open Lightroom after installing, my options of the develop module had changed - few options, no option of "shadow" (now it is called "recovery"), etc.  I uninstalled OnOne but the problem is the same as before.  Any ideas? Thank you!

    Your images are in process Version 2010.  Change them to 2012 for new tools.

  • -Panel Page printing module: Options of Page & info lost Photo

    In the print module, there are only 4 functions rest now in my version of the final version of LR3:

    1. the Page background color.

    2. identity plate

    3 tattoo

    4. turn off the Guides.

    Victoria Bampton describes also features with a screenshot of LR3b2 in his "lack of FAQ-Roughcut" (page 366):

    4 cut guides did not exist, but rather options Page with check boxes, and then 5. Photo Info area drop-down, then 6. Size of the font.

    That's happened?

    How to cover the following use case: create an invitation with photos and own free text on date/time/location?

    Please do not respond to "export a jpg in Lightroom and then use MS Word or any other editor.

    The beta phase I got the impression that the creation of such a pdf should be possible directly from Lightroom.

    That's happened?

    You use another "style of provision. The number of available options depends on the style of layout you use. You must select the style "single image/Contact sheet' to get all 6 options you're looking for.

  • Effects of blackBerry Smartphones of the option "Wipe Handheld"

    I am a new user with a Curve 8330 refurbished.  I need wipe contacts of the former owner, addresses, photos, etc. of the device.  I find the option "Wipe Handheld" under Security--> General Settings Options.  My question is whether this action only deletes the data entered by the user or will also remove all complete applications that have been installed by my company.  any thoughts?

    The option to wipe Handheld only deletes user data, not applications. Is that if you select the option to include the 3rd party applications.

  • After effects CC doesn't have the option "Save as CS6?

    I am using CS6 to open a .aep file and it is the slightest mistake out. We tried to save the file from the original AE CC as a CS6 version system, but it wasn't an option in the menu, just save it as CC 12.0. Any ideas here? I need some backward compatibility between the two versions. What I find online is that it is supposed to be an option "Save as CS6" in AE CC.

    Ben

    Here's the process:

    1. Open AE CC 2014 and save a copy under AE CC
    2. Open the project file of the first step to using AE CC (don't open it with AE CC 2014. Yes, you must have two versions of the CC installed to make it all the way to CS6)
    3. Save as CS6 AE in AE CC

    Each version of AE will not save backward one version.  Having two versions of the CC, it is confusing.  Hope that helps out.

  • Context in the form adobe module options

    Is it possible to have a PNG or a picture as background in adobe forms module?

    As of now, you can't add a background picture to a form widget, however, you can submit a feature request in the ideas of this forum (http://forums.adobe.com/community/muse/ideas) section so that other users looking for this feature can also vote for the same thing.

    For now, you can just place an image size appropriate behind the form itself (because it has a transparent background fill).

    See you soon,.

    Vikas

  • Why my effect options have moved to a new Panel

    A few days ago, when I first started Pr effects, color lumetri, libraries and other options had been displaced the dialog project to a new box on the right side of my screen.  This was an improvement of the update or I did not alter a window frame that I can't find it again?

    Hi MelindaGrider,

    Could attach you a screenshot?

    You might have changed the workspace.

    You can try any other workspaces (window > workspace).

    Thank you

    Ilyes Singh

  • Dark energy for After Effects

    I want to get denoiser dark energy, but it is not yet compatible with the new update of Creative Cloud 2015, it does not work for CC2014.  Is it possible to return to CC2014 for After Effects until dark energy updates?

    See here:

    How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  • Develop the Module tool options: change back to the old to the new...

    Hello!

    I have a question about the develop Module in LR CC 2015 version. Sometimes I see the latest tools/options (highlights e.g., shadows, white, black), and other times the old options (exposition of exodus, recovery, fill light, black). At this point, it seems random - a set on a photo, another series on another photo of the same file type, sometimes both flip flop on same photo file...

    What is happening with this?  (Running Windows 8.1, FWIW)

    The Version of the process is carried forward from your LR catalog previous edition. Unless "update you the process version" it will remain the same. It is better to update the one-at-a-time images according to your use of the image file. If it looks good with the old version of process go forward and this continues. If an image has a problem with details of highlight or shadow, then this is a good candidate for the update to Version 2012 process. LR "will convert automatically" your settings for the new PV, which may seem very well. If this is not the case, reset the settings of your PV2012 to 0 by default by clicking on the word 'Tone' in the base Panel and repeat.

    https://helpx.Adobe.com/Lightroom/help/develop-module-options.html

    operaflute wrote:

    At this point, it seems random - a set on a photo, another series on another photo of the same type of file, as sometimes the two sets flip flop on the same file of photo...

    This is probably caused by the application a develop preset with the old version of process.

    Update the process Version in develop presets Lightroom 3 Lightroom 4 and later versions

Maybe you are looking for

  • FF resolution settings to lower the consumption of bandwidth

    What versions of FF will do and what the specific settings are there for lower bandwidth consumption? In addition, the FF settings will be override settings on sites like youtube? For example, if my children were to click on a higher resolution or HD

  • my printer hp officejet pro 8600 n9911n series has a "ghost in the machine".

    My printer HP Officejet Pro 8600 Premium position of outgoing fax, and then numbers appear, usually of 9 and 6 randomly.  As soon as it starts, I can't abandon this process without turning off the printer.  My firmware, drivers are all to date. It's

  • Satellite L50-B-1LN - broken screen hinge

    Hi all November last year they gave me a L50 B 1LN Satellite to the DSO at my University to help dyslexia as I had never really owned a decent laptop. Since then, I have the Treaty with great care, so you can imagine that I was not too happy when the

  • The VM Converter Microsoft 3.0

    Need to know if someone has the Virtual Machine Microsoft Converter 3.0? Version 3.1 supports more Windows Server 2003. Where can I get if you know?

  • C6250 Solution Center

    Just upgraded from Vista to Windows7 and C6250 solutions printer Center does not work. Thank you!