Effective handling Array

Similar Questions

• Dynamic link to After Effects, handles

  Hi everyone, I apologize in advance if this has already been replicated in another thread.  I had a good glance and then discussions were referring to this, no cover the specific problem I have.

  At first I had the same problem that a few people have had - when I click right gripper in my timeline first and selected "substitute after composition Effects", I was confused and embarrassed as to why my transitions not working first.  I understand now that it of to do with handles (parts of a clip before the in and after the exit points that allow to do things as cross dissolves right?) and the fact that dynamically linked clips AE do not automatically counts for them.  The original video clip is long enough to deal with transitions but my dynamically linked clip starts and stops at the points of entry/exit, me leaving not enough spare executives to cross dissolve.

  OK, so finally my question.  Is there a way, when dynamic linking, to do AE account for handles?  In other words, to make enough of the original clips, lets give him enough on each side of my entry/exit points that I can still cross dissolve?

  I would appreciate help with this.

  Thank you!

  As your clip you wish to replace it with AE composition can be fairly complex piece of several nested sequences, and you is not forbidden to have other extra video and audio in the timeline panel, it's easier to do some preparatory work in PrPro full:

  1. Select clip you want to replace it with AE composition and paste it for example in the slopes above and below

  2. develop according to your borders of transitions and then replace with model AE

  

  3. When you have finished your magic in AE, select this very scenario PrPro you initially want to replace it with model AE (if you want to keep your original audio intact, break video audio link first).

  4. Select your model dynamically linked in your project Panel or Source monitor, keep pressing Alt/Opt and then drag the clip selected in the timeline panel - it preserves your transitions to disappear (if you want to drag just video, only video perlace of the Source monitor accordingly)

• Mounting set 2 separate projects of AE CC made first?

  Hello

  I have 2 separate hi-def AE CC project with audio tracks (40 sec and 03:00 minutes) I want to edit together. It is common to import 2 projects rendered in first and to export in a movie?

  The projects were made separately, and the version of 40sec is 32-bit and the other 8-bit (8 bits for text > Effects > Count/Format), the question of what bit type to use is another question, but I think that it's OK to import 2 separate rendered movies first to create 1 final cut?

  Thank you

  Dylan

  Do this all the time. Most of my work on EI is imported as a model of EI or a movie rendered a codec to production in an NLE for editing. Most of the shots that I create in after effects handles (additional images to the head and tail of a sudden), so they can be changed or there is room for transitions. The main objective of the EA is to create shots or short sequences. After effects is not and was never intended to edit movies.

  You also mentioned sound. After effects is barely able to make a few minor changes sound. If your audio has any complexity you should learn how to use Audition to change your sound.

• The most effective way to the U16-> U32 Array pack for DMA data transfer?

  I have a RT controller who wants to send data to an FPGA using DMA.  In LabVIEW 8.2, I have no choice but to switch to the low blocks of data however U32 my my input data is an array of U16.  This leaves me two choices: 1) wire U16 table directly into the DMA node that will be rude to U32 but I lose 16 bit * #of table 2) Pack the U16 elements in a U32 table before sending it to the bottom.    I have #2 and I have a method that works (and seems to be quite effective) but I have the feeling that I'm doing the hard (or roundabout way).   Is their a simpler (but equally effective) way to do this procedure?  Thank you

  Here's a solution that swaps the bytes and key elements the same. There are several ways to do so.

  

  (for efficiency, you can place the table 'remodel' inside a case structure then, it happens only if necessary)

• Hallo :-) ICH nutze Adobe Photoshop CS5 and Premiere Pro CS6 - sharp program konnte ich vor einem Jahr bei einem Handler kaufen! Leider there mir heute die Zusatzprogramme wie 1. CS6 hearing 2. Adobe After Effects CS6. (Like erweitern möchte)  Ich

  Hallo :-) ICH nutze Adobe Photoshop CS5 and Premiere Pro CS6 - sharp program konnte ich vor einem Jahr bei einem Handler kaufen! Leider there mir heute die Zusatzprogramme wie 1. CS6 hearing 2. Adobe After Effects CS6. (Like erweitern möchte)  ICH konnte eine Bundle CS6 jetzt mit allen Programmen zusammen kaufen diesen, was mir meine Arbeit der würde. Dabei muss Aufenthaltsraume.man CS6 Software CS5 deinstalliert werden und die. Stay EIB verhindern sharps beams CS6 already erstellten Filmdateien und Projekte receive nehmen sharp dabei Schaden oder alle?

  Link to buy the CS6 via phone http://www.adobe.com/products/cs6.html read all the way down

  From what I was told by an employee, newer than 10.7 Mac must subscribe in the cloud instead of buy CS6... and someone with Win10 must also subscribe to the cloud for CS6 is not compatible (meaning that the seller will ask you your operating system and not sell you CS6 if she does not work on your computer... I don't know if this means that Win7 and you can't buy if you have Win8)

  Please report back with your operating system if you are able to buy CS6

• After Effects object moves using the handles on the curve of an animation...

  Hello

  I'm doing this project effects after where I have an object animating an image key to another key image. I set the handles for this curve of the animation. Once I had which I've been the object to remain still after he curved in its position, before the next keyframe returns to restart. But in this situation when I want to rest again he drifts on the side and then back to its original position.

  My keyframes are fine. I took a screenshot and circled what, in my view, the problem is (white circle). Please help me understand how to get my curve of animation always without going through this strange drift.

  Thank you!

  

  I just thought of it... I had to click with the right button on my keys to position images and click on "toggle hold keyframe.

• I get the effects of lighting without handles to move the lights around assistance

  Effects of light, I get no handles to move the lights

  Can someone help James

  Thank you very much for the screen shot. Everything seems normal with the rest of the dialog box, missing just the handles. The handles are something that is specifically generated by your video card, which suggests that everything that happens here has something to do with it. As a general rule, when this is the case, the questions is drivers (software that controls hardware). On a Mac, the drivers are automatically updated through OS updates (which means that you can not manually update the drivers in most cases). I noticed that you are using the 10.9.5 version of Mac OS. Update the operating system to El Capitan might need to update the drivers for the video card to get this functionality.

• How Labview grab handles in the array?

  I have an array of large 2by2, and I do a lot of travel such as the removal of the top row and add the data to rank the lowest. The size of the array never changes, but I manipulate the data a bit.

  My question is: how Labview manages this manipulation? Is this just smart enough to manipulate pointers rather than copy the values over and over again?

  I'm looking at the interface with the dll, and it would seem that Labview for a 2by2 arry have only a pointer to all the numbers such that the number is simply distributed over a block of memory. Is Labview all done with any size chart? Just store in a large part?

  Thank you!

  d1sturbanc3 wrote:

  I have an array of large 2by2, and I do a lot of travel such as the removal of the top row and add the data to rank the lowest. The size of the array never changes, but I manipulate the data a bit.

  My question is: how Labview manages this manipulation? Is this just smart enough to manipulate pointers rather than copy the values over and over again?

  I'm looking at the interface with the dll, and it would seem that Labview for a 2by2 arry have only a pointer to all the numbers such that the number is simply distributed over a block of memory. Is Labview all done with any size chart? Just store in much?

  Thank you!

  Yes to the most, "depends on" the rest of your questions.

  Operators of memory "inplace" you will work within a single buffer. Some of the normal array operators will do the same (replace the subset of table for example). Build table, no.

  Try to use "tools > profile > buffer Allocations... Show.

  To see where you have additional buffers in your code.

  BTW: The process using «Show the buffer...» "and then rewrite to eliminate is sometimes called"Chase points ".

  Have fun!

  Ben

• Unable to get the element of the array by LabVIEW table Handle in DLL

  vc code follows:

  #include "extcode.h".

  / * LabVIEW created typedef * /.
  typedef struct {}
  dimSize of Int32;
  Double elt [1];
  } TD1;
  typedef TD1 * TD1Hdl;

  extern "C".
  {
  _declspec (dllexport) void CINRun (TD1Hdl input, double * output);
  };

  _declspec (dllexport) void CINRun (TD1Hdl input, double * output)
  {
  Failed to get the first element of the array passed to DLL LabVIEW
  * Output =(*Input)-> elt [0];

  If change the above code as follows
  * Output =(*Input)-> dimSize;
  It is then managed to get the size of a dimension table.
  So, what's the problem?
  }

  the labview vc and program project are attached.

  the problem is: run the program labview, can not get the good result of the table

  Thank you

  Chen

  You have made two errors:

  Error 1 (alignment!):

  

  Error 2: passing parameters:

  

  Change it as above, and it should be OK.

  Andrey.

• What is an effective way to handle this

  Scenario 1

  a. If the target table has any record higher then a specific date for a ID given (SELECT INTO)

  b. If count > 0 then

  Delete all lines using the same where clause

  further treatment

  end if

  Scenario 2

  a. delete a line if the condition in which clause matches (even where clause that we use in above select statement)

  b. If sql % rowcount > 0 then

  perform another treatment

  end if

  Scenario 1 still runs a SELECT statement but REMOVE will be executed conditionally

  Scenario 2 run DELETE statement always

  I wonder which of the scenarios above is more effective than the other. My table has about 200 M lines

  Thank you

  Scenario 1

  one requires of e/s

  b requires the same IO, as Oracle will answer where new clause

  So, if count > 0

  will do everything twice.

  If count = 0, regardless of the second statement is not executed because it would cost IO anyway.

  Scenario 2 is the most effective.

  -----------

  Sybrand Bakker

  Senior Oracle DBA

• How to handle small size photos in first for Ken Burns effect

  Hello, I know how to do the Ken Burns effect in first, but don't know what to do with the images that are smaller then 1920 x 1080 sizes.

  They are photos of the 60' and 70's and if I blow up picture size or to do the Burns effect, they are falling apart.

  I see people using photos really very old that look always good.

  How can I put them when they are low resolution or more small size?

  Thanks, J

  If the images are old, then their existence as a real film prints.

  Rescan them at a higher resolution.

• I can't find the request under Effects Premiere Pro CC handler 2015

  So I recently downloaded a demo of first Pro CC and fell in love, so I bought the monthly package.  The only thing is that I can't find the button that everyone goes and everything that turns photos, videos!  I looked around and everyone seems to have a different answer... Here's what my manager looks like:

  

  As you can see even when I try to find the file to QUERY or rotation, nothing appears.  Please help I really want to do edit my video for my subscribes!

  There are three things you will see in the program with the word "Effects" in there:

  1. The effect controls panel
  2. The effect controls panel
  3. The effects workspace

  What you're probably looking at is #3 - and if you click it, it will change the layout of your program to the standard framework 'Edition' layout 'effects '. It's not bad, but it is potentially confusing. All that means - don't click it!

  Instead, just below you should see the words 'Source', 'Effect Options', 'Table of mixing Audio Clip' and 'metadata '. Click on the tab 'Options effect.' That you will get the appropriate panel where the effects of movement are housed.

  If that doesn't help, can you please upload a screenshot of your whole program? Then I will be able to provide specific instructions. Thank you!

  And it's not idiocy. Entering a new program can be confusing. First is a fantastic program, but can be more than a little intimidating for a novice user. Once you understand it, you will learn to love even more.

• vcpus most affected that the OS can handle is what effect has on ESX 5?

  I came on 32 vcpus assigned to a windows 2008 storage server vm essentials which I believe is limited by the license to 4 vcpus, there has been, in my opinion, more supplied with 4 sockets of each with 8 cores, by the sys admin not me, what effect it would have on the guest operating system, and host ESX 5? or the two would put the additional vcpus in shutdown? This would allow running slow? ESX would be able to use the remaining 32-4 = 28 vcpus for other virtual machines or could it be hogging these extra vcpus unusable. I can not access esxtop due to restrictions in place, but graphics performance on the cpu of ESX rdy seems out, i.e. instead of weekly 18 000 which means 1 waiting for cpu from what I've read here: VMware KB: conversion between the summation of values CPU and CPU ready % oscillates at the tops of the 30,000 sometimes on other virtual machines Another witness sign, it is that on the other virtual computers Linux invited the "charge" inside the guest is allright on the virtual machines configured with 1 cpu but climbing path because the peaks of 10 for a virtual machine configured with 4 processors. On Windows NAS 2008 itself summons rdy cpu is sky high by weekly graphic example 150,000 to the rush hours and at least 50,000.

  Thanks for any idea.

  Ah, now I get you. Well, you can be sure that Windows uses more than 4 vCPUs. And Yes, my guess is that ESXi always try to plan all of these processors because ESXi is not clear that the processors will never be used. It seems just as inactive. Therefore a drop in performance of hughe.

• How can I see end keyframe markers (and their Bezier handles) in the scenario of control effect?

  Bézier control disappears when a keyframe is at the end of the timeline:

  

  But if I move it a framework it appears:
  

  But there must be a better way.  I don't understand why I can't see beyond the last image or before the first image when affect the Bezier controls.

  Does anyone know how to display the timeline effect fully?

  Thank you in advance!

  Don't know what to tell you. With the Clip pin verified, may not go far enough to see the keyframe at the end of the clip:

  

  With PIN to Clip unchecked, I can:

  

  Something to check-

  so that this works, the clip you're watching may not be the last clip on the timeline (as there is nothing for the effects slider scroll to or show after this clip) so if this is the case, add a few black or something after it and see if that helps.

  MtD

• After effects CC 2014 unexpectedly quits on launch; GPU error handler

  Hello

  Here are the symptoms:

  AE crashes every time that I run.

  After the alert on the effects:

  Last log message has been: < 5336 > < GPUManager > < 2 > Sniffer result Code: 3

  
  

  System Specs:

  Windows 7 64-bit, intel core i5 4690, 8 GB ram, GTX 760 2 GB

  After effects CC 20141 version

  Do you have Windows 7 Service Pack 1 installed? Do not have installed is often the source of this problem.