EFI disk0s1 not mounted. screen shows gray with help file when I restart
I had these problems with my recent Mac.
1. it freezes for a few seconds. Then begins to work properly. And then freezes. The beachball keeps spinning and I can't access any of the applications.
I tried restarting. But came up with another question. The gray screen of the charges and file aid continues to Flash.
I tried from the recovery mode, but I get the Internet (OS X Lion). I'm under El Capitan. In disk utility, I check and repair the drive. Stop and try again. Now, there are two current icons and off - no logo entry sign and apple. If I'm lucky then after 40-50 seconds, Mac starts up.
Now, I tried to make the EtreCheck, and he gave me more results for disc
Disk information: ⓘ
HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 499,25 (Go 110,18 free) - 70 errors
Drive failure!
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS41N)
That's what worry?
What can I do to fix these problems?
Disk0 unit 1 is not the problem. This is the EFI partition, which is never mounted, because it is used only by the bootstrapper, long before that the file system is initialized.
Your problem is 70 errors in disk0 tranche 2, the volume Macintosh HD. This hard drive (the entire disc) was his. Dead. in ruins. You need a new drive.
Tags: Notebooks
Similar Questions
-
My Dell Inspiron 3520 screen goes gray with horizontal lines during use. This reminds me of an old television set, except the lines do not scroll. Everything started after I upgraded from 8 to 8.1. I was wondering if anyone had any ideas on how to solve this problem? Thank you
I agree with the upgrade to windows 8.1 as the origin of the problem. If you check the video card, you will see that it is a 3000 graphics card intel. You will see that the upgrade has changed the driver to one for January 2014. I did a back roll of this driver. On my machine, she restored a driver with date of September 2013. After that the computer was OK all night so I think it solved the problem. Appears there is something wrong with the driver that is loaded with 8.1.
-
When I click on a shortcut on my desktop I get a message saying that the file does not have a program assoiated with this file
Hello
These are shortcuts to Internet?
1. make sure that Internet Explorer is the default browser to the control panel > Add/Remove Programs > Set Program Access and Defaults, choose Microsoft Windows or custom. Make sure that IE is selected as the default browser.
2. on this page download and run the patch for files of the URL.
Difficulties of Windows XP file association:
http://www.dougknox.com/XP/file_assoc.htmDon
-
Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... This is our easy to understand for beginners like me at all
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
https://forums.Adobe.com/thread/1962238
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Install, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
-
I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.
I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.
How can I solve this problem
the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.
If you are not a Subscriber cc then Dropbox or iCloud will work as well.
-
Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade
HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed. Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter. All other discs mount correctly. Disks with EFI partition will mount on other PCs. All the drivers seem to be current and fuctional.
I thought about it... after two weeks of puzzle, I finally found the cause.
I run MacDrive 8 so I can play discs with HFS + formatting. This program should be completely uninstalled and reinstalled after the upgrade. I had turned it off before the upgrade, but it takes more than that. Everything works now as expected.
But wouldn't be INCE if Windows reads discs mac natively?
-
"this file does not have a program associated with it" message when you insert the sd card
When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?
Windows 7
The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual. -
System screen shows black with the cursor after starting with no other course
My Dell 1520 with vista home premium to int insptrion black screen after the user connection commissioning and hanga at that time here.
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Some Web sites can not access, screen goes white with http 500 errors
Original title: http 500 errors
Salvation; Please forgive my PC literacy is near the bottom of the range, but I recently started getting errors. I can browse the Web, but when I log on say Web site common CBSSports and try opening a session I did a million times - the screen blanks out and tells me unable to access Web pages and when I ask for more info... I'm getting http 500 Internal Server Error. It seems to get worse and unable to access less Web sites. Can someone please help?
Hello
Thanks for posting your question in the community of Microsoft Windows. I understand that you are unable to browse Web sites with http 500 errors. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will definitely help you with this.
To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
1. what web browser do you use?
2. have you made any recent hardware or exchange of software on your computer before the show?
Please follow the methods below if you use Internet Explorer and check the number:
Method 1:
Can't access some Web sites in Internet Explorer:
http://support.Microsoft.com/kb/967897
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Method 2:
Why are some pages blank or incorrectly displayed in Internet Explorer? :
http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer
Method 3:
Get help with website (HTTP error) error messages:
http://Windows.Microsoft.com/en-us/Windows7/get-help-with-website-error-messages-HTTP-errors
I hope that the information above helps you.
-
Off computer not start screen shows black after safety cut
Stop error code STOP security OX0000008E (OXC0000005, OX85BAEB58, OXA1B179E0, OX00000000) CLASSPNP. SYS-ADDRESS85BAEB58BASEAT85BA9000, DATESTAMP4549B196
Can anyone provide a solution for the above codeHello
Update your driver, BIOS and any software of control and then work through the troubleshooting services
above if necessary.Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
Sites of the manufacturer of the device.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
HP Jet 13: could not get the usable screen after you enter the password when you restart
After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery. After the press, I have the icon pushing, my name, email and password. By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.
That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online. Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.
Please let me how to restore my system or to whom to return it.
Thank you
The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ
Hello
Try the following.
Boot the computer normally and log.
Black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on file and select the new task.
Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.
When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.
If the above is not correct the problem, try to run the steps in the link below.
Kind regards
DP - K
-
Project Manager do not copy a project correctly with multiple files of span
"Houston, we have a problem." OK, I think it's a serious bug in the Project Manager / Mountain Lion copy function.
This is my first complete Assembly with PP, and unfortunately I did not advance file management. This is so what I put up to do all my editing (which worked great).
3 camera files - all AVCHD (PRIVATE) on my external drive 1.
Created a project in PP file and saved to my local dive.
Imported files, 6 camera with Media Browser [(milieu, gauche et droite) - acts 1 and 2].
Import named these files vidoe XXXXX. MTS, so I renamed the Act1, 2 Center, Act1 right and so forth.
Created a chronology of MASTER and then synchronize the video and then created a scene of the MASTER schedule. Again, EVERYTHING GOES WELL.
Now that the project is done, I want to use the function of project manager COPY 'Archive' my project so I chose to save to an EXTERNAL DRIVE 2.
Here is the BUG. If I open the project file on external Drive 2, not all my clips are emerging. In fact, if I select one of the VIDEO CLIPS, such as CENTRE ACT 1 and make a find in the FINDER it shows:
where, as in the original project on my local drive CENTRE ACT 1 appears as: (note that there are several split files as it should)
Note that in the COPIED file element he copied an AVCHD only (and I don't know what does it file is appropriately for 6 of them).
Thoughts?
Anyone know where this should be reported as a bug?
-
On several sites, as the site for Toyota Southeast and the Florida Department of Transportation SunPass, site systems will serve PDF files that simply are not displayed in FireFox and that not downloaded. Previous versions of FireFox had no problems with these sites; Make FireFox 4 and 5. Other browsers, including Safari, Opera, and web, on Windows, IE 8 and 9, have no problems. Is there a fix and when will it be available?
Using Adobe Reader with Firefox plugin
Opening of PDF files in Firefox
Troubleshooting Plugins
Check and tell if its working.
-
My mac screen go black with spots open when google map
When I open the google map in firefox or safari, my mac pro with the retina book goes black screen with some tasks. When I press a button off and turned back on, I have to connect again to my mac and google map screen displays in my browser.
The questions and problems.
Thank you.
Hi soe wai lyian,.
Welcome to Apple Support communities.
If I understand correctly, your MacBook Pro stops responding and displays a black screen empty when visiting specific Web pages. Try to take a glance at the article following the link through the isolation and the advice of troubleshooting.
See you soon.
-
Operating system Windows Vista Home Premium Version 6 (service Pack 2 build 6002)
I think it's some kind of problem to refresh screen for Thunderbird window. I have no flicker except windows Thunderbird is exposed, the problem disappears when Thunderbird is closed.
(Thank you Toad-Hall)
jipes and thanks for posting your results
Maybe you are looking for
-
How to prepare the server Mac Mini (late 2011) for sale?
How to prepare you to a Mac Mini Server Lion (end 2011) that is running the latest version of El Capitan (10.11.4) and is not used as a server from scratch? Response or want user to be able to start over with her as a new State.
-
I do not use e-mail in windows vista at home because it is not compatible with my work address or my mobile outlook Microsoft windows 6.5. How to return to outlook?
-
Windows updates stuck on the Windows start screen.
Windows Home screen is stuck it just keep going along in a loop, with message configuring updates 3 of 3, this started after attempting to upgrade Windows 7 to Windows 10 I can't out of it, had driven myself crazy trying fixit please if anyone has a
-
Is not my cd - dvd burn/read any dvd.
Original title: tsstcorp cddvdw sn-208bb. Hello I have a samsung RC-530-s04pt laptop and my cd - dvd only burn/read all DVDs (no cd try), I update the firmware on TSST corp, fixit performance, update the driver (from Device Manager) and nothing worke
-
in regedit, what is the effect of changing the number of 20000 to 200 in the waittokillservice? Original title: regedit