Ehrecvr.exe error message appears
This error message keeps popping up every few seconds. How can I stop it. Its Media Center Receiver service.
Control Panel, administrative tools, Services. Find all instances related to Windows Media Center Receiver and disable them.
Tags: Windows
Similar Questions
-
Hi all
An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.
I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,
Although I installed file encryption software.
This could be a virus? and how to prevent this error message appear on my computer.
Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.
-
Original title: Windows Rundll error on startup
My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll. The module specific cound not be found. I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.
What is a rundll error?
Why do you Rundll errors?
Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.
STEP 1: IDENTIFY
The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:
STEP 2: STOP THE PROCESS
Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
1. open your Start menu.
2. click on run
3. in the command screen type:services.msc
4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
5.stop the "dll" service immediately.NOTE: sometimes the dll process can not be stopped by this method.
STEP 3: CHECK FOR AND REMOVE
You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN
This action will help you speed up the considerable load time of your applications. Here's how:
1. click on Start
2. click on run
3. type regedit
4. find this registry key:
HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
6. delete the value and reboot.SPECIAL REMARKS
Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.
The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.
======================
More information is a lot to explain and resolve the problem.
Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.
Because not only it solves problems, there will be new user settings and the program files needed for the user account.
Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.
Here is the link.
Run hitman pro 3.5
-
My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.
Hello
The exact error message would have been very useful because it may be Malware.
It may be a legitimate program.
http://support.Microsoft.com/kb/174381
http://www.fileinspect.com/FileInfo/MSDTC-exe/
Would that be it: "MSDTC Console?
And can be malicious:
http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html
It can be a boot entry remains of this Malware.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after the scan post back or if it was malware take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
Usertile.exe error message
I have a user who uses a laptop with Windows 7 OS. When the user connects, they receive an error message that USERTILE.exe has stopped working. The error message appears when the user connects to the computer for the first time. Not known to other problems have arisen regarding this error. Everything seems to work properly. Any help would be great. Thanks in advance.
The details of the message are listed below:
Description:
Stopped working
Signature of the problem:
Problem event name: CLR20r3
Signature of the problem 01: usertile.exe
Signature of the problem 02: 0.0.0.0
Signature of the problem 03: 4d64f28d
Signature of the problem 04: usertile
Signature of the problem 05: 0.0.0.0
Signature of the 06 problem: 4d64f28d
Signature problem 07:2
Signature of issue 08: 1
Signature of the problem 09: PSZQOADHX1U5ZAHBHOHGHLDGIY4QIXHX
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
Hello
Thanks for posting. If I understand correctly, you receive an error message when you log on to the user account. I would like to know if I am incorrect.
Before I continue, I would like to collect some personal information.
Method 1:
Follow the link, check the safe mode issue
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2:
Follow the link and check if the problem persists in clean boot mode. Check if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Method 3:
Follow the link below, perform a Virus scan and check if that helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Reply with the results. I'd be happy to help you at best.
-
How can I disable the sound when an error message appears?
There is an anoying sound when an error message appears in FF. I looked in preferences, but it doesn't seem to be an option to turn it off.
https://www.liberiangeek.NET/2013/07/how-to-change-or-disable-the-alert-sound-in-Ubuntu/
Parameters can change a few years under Ubuntu, but this gives an idea where to look.
Firefox itself has no such sound notifications.
#367259 said
maybe try to turn off the sound error in operating system Windows/preferences
not sure if FF has its position about the error of hisIt's Linux and not Windows, but you're on the right track.
-
A small window with the error message appears whenever I want to open Firefox or if Firefox wants to open a window. I have to click the OK button and then open Firefox. It's embarrassing.
I have a "Site of McAfee Advisor" in my add or remove programs.
-
Startup error messages appear suddenly following failed repartitioning
Following a repartitioning my hard drive using Partiton Manager, that bad happened and destroyed my system, I have now reinstalled Windows XP preparatory to the high upgrade to the Windows 7 page. However, during the time it failed to boot up my laptop, and after reinstalling the operating system, I get a BIOS message that reads
Reprogramming & establishing Link and, after apause, 2 error messages appear:
PXE - E61: Media Test Failure, check cable
PXE - MOF: Existing Intel Boot AgentApart from food, there is nothing attached to the laptop.
What goes wrong and I need to do to correct the problems, please.
You know what, install the OS by using initial recovery DVDs and the problem is solved.
-
I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?
Does anyone else have this problem?
It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?
I have the same problem!
-
Sam s173-1415: cannot use the restore CD - 'Bad Machine' error message appears
I have a s173 1415. I had to format the hard drive, when I went to use the original CD that came with the laptop it said BAD MACHINE. So I installed Windows XP.
Now, I have all the necessary drivers and can not find one for the dvd/cdr drive, so sometimes the disc is recognized and sometimes it disappears.
I want to set the laptop to original state, but the CD won't let me.
What can I do?Hello
It s very strange that this error message appeared.
Generally all compatible CD should be delivered with this laptop.
If you want you can order form taken CD supported and compatible, Toshiba service partner. It s not very expensive.You will also find the page of all drivers on the Toshiba driver download:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#Please install all drivers in the correct order. The chipset utility must be installed and the beginning.
-
Error messages appear during the priming by Satellite A100
I tried to start my laptop and this error message appears:
hidden, system bios video BIOS with a shadow,
bus controllers USB PCI-card resource conflict mother Bus: 07, device: 06, 01 function
resource conflict-PCI mass storage controller on card mother Bus: 07, device: 06, 02 function
resource conflict-PCI PCI on the card mother Bus: 07, device: 06, 03 functionHow can I solve this prob?
Hello
Looks a bit like a conflict of devices on the motherboard.
There is always a mentioned device: device: 06
Then perhaps, all error messages are related to the same device. I m not very well what 06 device could be, but I think that it s miniPCI device and, possibly, a wireless network card.Try to remove the local NIC in the laptop and check again.
But before you do this, go into BIOS and set the BIOS to default settings. Save the changes and start the machine again.
Check if the message appears once more -
BTTray.exebssdk.dll error message appears at startup
btray.exebssdk.dll error message appears on starup. I think I know what program is missing. I just want to stop the message to come.
Verify the path of the dll file... If she is in a place such as \appdata\local\diagnostics\apn\, this is not a system file...
May be that a third party/malware software falsified some startup items... Most of the time this can be due to malware/adware software removal by an antivirus but do not remove the startup entry...Malwarebyte s scanning is a good idea http://www.malwarebytes.org/free/
But you may need to remove by start up
(1) if there is everything about the .dll u you described here, to the start system tray turn off...
http://www.pcandtablet.com/Windows-7-tutorials/1343/how-to-disable-a-startup-entry-in-system-tray-task-bar-in-Windows-7-a.html
http://www.pcandtablet.com/Windows-8-tutorials/1340/how-to-disable-startup-items-from-Windows-system-tray-in-Windows-8-a.html
ortry to use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902If you look at it, it should be under the present
In case if you can't find using the above methods, it might be under
taskschedule ===>Scheduler task library. If found delete the entry about the Task Scheduler Library ftphost.dll
or
You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
then navigate to these paths...[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
then look for the .dill file you have described here and delete this key... RESET
more this could be due to this... If you still get that you can move forward with this... -
I can not load forgotten that an error message appears
C:\DOCUME~1\COMPAQ~1\Locals~1\Temp\c367_appcompat.txt that's my error report. When I try to load forgotten that an error message appears and the wont let me play. and it does on my build for forgotten also. all my other games just not work it and I installed the latest version of directx and still no access. Please help me I miss my game
-------------------
-
ZSMCSNAP.exe error message!
Whenever I boot Windows XP, SP 3 "zsmcsmap.exe" error message is displayed. Please help to get rid of it.
Yes you can. Your device may be defective due to a corrupted driver or faulty and if that is the case, you should see an indication of that in Device Manager.
Go to Device Manager by clicking Start, run and type "Devmgmt.msc" in the Run dialog box and click OK. Scroll down to find the entrance to the USB camera, expand by clicking the '+' sign. There should be one. "X" or a"?" next to the device.
If you are still interested to install your camera, you can find the correct driver for it on the site of the constructor in the link below.
Vimicro support.
http://www.Vimicro.com/English/download_n.htm
If you don't, remove the usb, the return device in Device Manager, and then uninstall it.
Let us know if there is anything else, we can help you.
Good luck.
-
How to fix error 0xC0002751
When you try to download an Overdrive audio ebook, the 0cC0002751 error message appeared. How can I fix it?Hello Ellen,.
Please take a look at the following Microsoft article which seems to answer your specific question:You can also try to download and run this specific update for Windows XP that should solve the problem you are experiencing:
Maybe you are looking for
-
Facebook watch notification 'you have received a new message' instead, the preview of the text... because it did before... I have the chrome browser and Mac OS X Mavericks. Something has changed this week or so because two weeks ago it was beautiful.
-
Satellite A660-155 "KEY PAD LIGHTS" is disabled
1 MONTH OLD MACHINE, SOMETHING OR NOTHING? The word Sam, pad top line touch and all the icons next to power button use to light up.Now only the power button lights up. Is there a switch/button I have typo by mistake, or is it a defective machine. Tha
-
Question on the first battery charge on Satellite A110-195 times
Hello! I just bought an A110-195, and I heard that I have to charge the battery for the first time without operating the computer. If it is true, how much time I have to load it? Thank you!
-
2012 R2 server hangs randomly - Dump shows "probably caused by: ntkrnlmp.exe.
Try to find what has caused the problem. Please check below for debugging details: HP (ProLiant DL380p Gen8) with Windows Server 2012 R2 ********************************************************************************
-
Runing Vista. New issue popped up recently. The printer is s-l-o-w. Impressions in fits and starts, as it might if it was printing an array complex. I have reloaded the software, cleaned the printer queue, set it to the low dpi, ran print and scan