Eject the CD after using DBAN

I have old a laptop Dell Vostro 1710 on which I wanted to erase the hard drive before sending it to the recycling

I downloaded DBAN on a CD and successfully cleared the hard drive

I would like to eject the CD on which DBAN is loaded from the laptop and keep the CD, before sending the laptop for recycling

However the laptop has been defined to use DBAN to start from the CD drive

Is there a way to eject the CD manually or remotely?

Thank you very much

The 'eject' button is just above the keyboard, near the keys play/forward/backward.  Number 6 here:

The posts I've read suggest starting in the BIOS by pressing the F2 key and then holding down the button while in the BIOS configuration utility.

You are not alone in this problem.  Several "creative" solutions among these hits: https://www.google.com/?gws_rd=ssl#q=vostro+1710+manual+eject+cd

Service manual (if you decide to take things apart)--> ftp://ftp.dell.com/Manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-1710_Service%20Manual_en-us.pdf

Tags: Windows

Similar Questions

  • Dialog import Lightroom CC no way to eject the disk after import?

    The new Lightroom screen that appears when I connect my computer with a flash card is confusing and overwhelming her aggressively. I can get used to it but first need to know how to control. I just want to see the flash memory card, I just plugged and not any possible place to get photos that I really want to see. The first question I have is I don't see a way to check the box to "Eject the card after import" - it is not possible or is there a hidden way to tell Lightroom to do this.


    PS: I don't quite like the new interface to import... Please leave the things that work well alone and focus on the implementation of Photoshop keyboard controls that many of us know to manipulate images, as the + and - to zoom in and out...



    Hi KenNielsen

    Greetings and thanks for your comments.

    -It is not possible or is there a hidden way to tell Lightroom to do this.

    This offer is gone in version 2015.2.1

    Update of Lightroom 6.2 import refer

    : I do not like the new interface to import... Please leave the things that work well alone and focus on the implementation

    We are working to resolve the known issues in Lightroom CC 2015/6. 2.1 version.

    You can ask for the features you want to see in future Lightroomin here Photoshop community customer family

    We would be happy to hear your point of view.

    Concerning

    ~Assani

  • the share button don't work and need to leave the app after used

    the share button does not work and I need to force quit the app after used

    Any individual plugin or all of them?

  • I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

    I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do


    Please see the links below.

    Also, make sure you use the right adobe ID to log in.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • Spit Lightroom 4.3 when using the brush after using the red eye tool

    I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

    The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

    Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

    It seems something funny on your establishment for sure that there is not a wide spread thing.

    What exactly is your establishment and where are the various files located - catalogue, images, etc.

  • RILD eats the battery after using my music

    Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

    Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

    I'm closing this thread to keeos organized things.

    You can often find answers and avoid the double post if you use the search at the top of each page.

    here is the link to the current thread.

    Thank you

  • Cannot use the network after using McAfee antivirus with removal tool

    Original title: Mc McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible.

    MC McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible. After removing the software and restarted, computer cannot connect to the net (device manager shows problems with NIC miniport McAfee mc?).

    Hello

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You can't connect to the network after McAfee antivirus using more the removal tool to remove McAfee software.

    The network drivers is maybe damaged.

    1. What is brand and model computer?

    2. What is error right messagee you receive in Device Manager?

    To confirm that the problem is with the driver, do us reinstall the driver:

    a. click Start, click Run and type devmgmt.msc and press enter

    b. now right click on the network card and uninstall it and restart the computer.

    You can also get the latest version of the driver from the manufacturer.

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • Can not see the 2nd partition on the computer after using the shrink volume option

    I had 2 partitions on the hard disk the same... but after separate 60 GB unallocated space of 2nd partition (drive D) and after rebooting I don't see my 2nd partition. After that I tried to change the drive letter and path, but it displays the following message 'the operation did not complete because the disk management console view is not updated. Refresh the view by using the refresh task. "If the problem persists close the disk management console, then restart disk or restart the calculation Managerr. I don't want to lose the data.

    Hello

    ·         Have you installed a third-party program like Partition magic on the computer?

    Try these methods further and check if it helps:

    Method 1:

    Try to use diskpart to assign a drive letter to the disk #0 Partition #1.

    (a) click Start Orb > type diskpart

    (b) click right diskpart in the above results > click run as administrator right

    (c) once diskpart load type list volume, press enter

    You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

    (d) type select volume 6 (replace 6 with the number of the volume assigned to the partition in question)

    (e) type assign letter Z (replace Z with the letter you want to assign)

    When you look in the computer, you should be able to see your score.

    Method 2:

     

    I also suggest that you run the Microsoft fixit tool and check if that helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 3:

    You can follow the steps in troubleshooting section below and check if it helps:

    http://support.Microsoft.com/kb/2001877

  • How to set current row in the table after use the button tab on inputText

    Hi all
    My first post.., I am beginner in ADF and I'll try to explain my problem.

    For now we use ADF 11 g (11.1.1.4), in a jsff page I have a table with a column of inputText.
    On the the inputText valueChangeListener, I invoke a method in a bean viewScope that call an EJB method, make some services to the EJB on the modified line. After that, I update the VO and the table (because other values in the row have been changed) and reset the focus on the inputText even modified by the user with javaScript, because the focus was lost after updating.
    So far, everything works fine.

    When I use the arrow keys to change the selected line in the table, this is excellent work (focus is always in the inputText next or previous), but if the user tries the key tab allows you to change the current line, the inputText on the line that has the focus, but the current row in the table is not changed (I think that is normal).

    My question: How can I change the current line after the tab key in this case?

    I don't know if it is really clear, not easy to explain, do not hesitate to ask for more details.
    Thanks in advance.

    Hello

    My question: How can I change the current line after the tab key in this case?

    Use a client event to listen to the keyboard entry and intercept the tab. Use af:serverListener to call the server to set the rowKey on the table and deliver a PPR for the table to repaint

    See example 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples

    to learn more on how to use the client listener and the receiving server

    Frank

  • Relative to the car after using DVR capture

    I have a Seagate 1 TB GB-Flex in the car that I used as a digital video recorder attached to a satellite receiver. I don't have have the receiver and want to use the disk for general backup purposes. I am running window OS 8.1. When I connect the drive, File Explorer doesn't. The control panel can see, but I can't do anything with it.

    Any suggestions?
    Thank you

    Go to disk management and assign a drive letter to the drive.

    If the POR was using Linux, you will probably need to format.
  • eject the card after import option missing from Lightroom CC 2015.2

    Yesterday, I upgraded to the last 2015.2 CC in Lightroom. The import Panel has changed a bit. But what worries me is that I can't find any where in the Panel to import for "eject card after import. And not the case in the preferences. I looked everywhere in this Panel.

    I use a Mac Pro OS X 10.10.5

    Can someone help me or explain what happened?

    Thank you

    Hi JJCAS

    This feature is no longer supported.

    Please ask for this feature to Photoshop community customer family

    Concerning

    ~ Assani

  • Cannot eject the dvd after you download Premiere Elements on Windows 7

    DVD does not eject after the download is complete.

    With Windows 7 to disc 4 also download?

    Home screen doesn't have an icon "open a project".

    Install the first Elements, Photoshop Elements

    For specific questions about the use, ask in the ESP / EPP forums. If the disc cannot be ejected, it means that it is still used by some process which, in turn, could mean that your installation not finished never well. Restart the system and try again then.

    Mylenium

  • Problems in the system after using the iolo system mechanic

    I downloaded iolo System Mechanic a couple of weeks and since the first time I ran it, I was not able to use my computer at all.

    When I start it, it is stuck on a black screen with an arrow in the he or she asks for bootable media or is stuck on a screen that says windows is opening files.

    I tried to use a windows disk to fix it, but have had no luck.

    Has anyone else had similar problems?
    The only reason for which I already thought of iolo system mechanic is because I received an email from Toshiba on this subject.

    Wish they didn't sent me that!

    Never had this problem but it is not very difficult to solve the problems in your system.

    You can simply set the system back to the point of time at the beginning before you start running the free health check.

  • Restore the backup after using a temporary machine for 2 months?

    I had a problem with my MBP that had a new motherboard fitted.

    Before he went to the interview, I did a full backup and for the 6 weeks have used a temporary MBAir.  When I started to use Air, I have a full restore from backup that I thought that I would need only there for about 1 week.  I copied all my work files needed overall, but don't mind not upload any music, photos, etc.

    I now have my MBP back and need to restore from the backup, BUT I also want to be able to synchronize all my work files, so that new files, I added to my working directories or keep the files that I have updated in the last 6 weeks.

    Any advice on how to do this, please?

    Very difficult. Above all, it should only be done manually.

    On the laptop with clean OS... assistant migration allows to recover your files in the backup.

    The MBA, copy the files to the MBP... easy enough for documents etc... hard work with emails... etc.

  • Do I need to release the bitmap after use?

    If I create a new bitmap in a local function I must free from the output of the function or the OS automatically frees the bitmap image?

    If I do this the memory release after the release of the function?

    for (int i = 0; i)< 10;="">

    {

    Bitmap b = new Bitmap (...);

    }

    don't see any method in Bitmap to release.

    It is Java... once the reference is out of reach, or is null, the garbage collector releases (finally!) memory.

Maybe you are looking for

  • Toshiba internal Bluetooth does not

    I hope someone can help! Situation, I tried to turn on bluetooth, but continually tells me that it has not been started. I tried the following command to make it work. Click the Bluetooth Manager,: - ("settiing Bluetooth" screen comes up) Double-clic

  • GT80N USB DVDRAM not activated

    I have a laptop HP Zbook14, but my HP GT80N DVDRAM don't recognize themselves in Windows 7. At least in the devices & Printers it is said "a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32) 

  • How to use bidirectional I/O in the CLIP of LabVIEW FPGA?

    How to use or define two-way i/o for CLIP with LabVIEW FPGA? I want to use 1-wire communication inside the kernel CLIP, the function will be implemented to read and write as I/O inside the CLAMP. The XML Generator (CXG) 1.1.0 ELEMENT does not support

  • Failure of the installation of the Windows SDK on Windows 7 x 64. "the installation failed with the return code 5100.

    I try and install the SK and it fails for Web and ISO Setup > DVD drive. Same error every time: 12:22:50 Wednesday, July 11, 2012: C:\Program Files\Microsoft SDKs\Windows\v7.1\Setup\SFX\vcredist_x64.exe install failed with return code 5100 The follow

  • Dilemma of blackBerry Smartphones Email

    Anyone know how to stop the emails flowing from this site on my phone? Since I joined this site, I've been getting emails from the site on each new thread and constantly deleting. It has become very annoying. I checked my personal options and there i