EJECTING THE CD USED TO INSTALL THE SOFTWARE.

Similar Questions

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Used to install the HP Officejet 4500 software

  I am trying to install the software for the HP Officejet 4500 that came with the printer, etc. but it will not install correctly. My copmputer has windows vista 32 bit.

  First the software would not install. I received the message toolbox.cab is corrupt and fatal mistake. I also got the message the installation package could not be open contact the application vendor to verify that this is a valid windows installer package

  Impossible to install the software I then plugged the printer etc in the computer with a USB cable and a Windows driver installed making the printer minimally usable without the HP software etc.

  Then I tried to install the HP software this time the software installed somewhat but strict install the Hp Image instrument functions. Also, I got the only e Hem 2 imaging HelpDir tp software key message: setup\tray Ap could not write value.

  I then downloaded the HP diagnostic software and there was the following messages

  Could not write value Def Lang Abbrev in key\signature; RegLocator; lnilocator; comploatator

  Problem with registration of the device

  Some components of the HP away problem with HP Digital Imaging Monitor software

  Problem with front panel software detection

  Cannot find HP solution center application needed to scan.

  Software diagnostic said to uninstall the HP officejet software and reinstall it but Im guessing that will do no good and am worried if I do that it will make the printer unusable etc. without pilot etc..

  I am able to scan a bit using old scanning software that came from my old scanner and am able to print some with the windows driver but worry that I won't be able to fax to not use all of the computer to the printer without the HP software, OCR software, am not able to scan directly from the printer etc and do not use the HP scanning software (do not know what are the characteristics that they lack that old software to scan my old scanner has)

  How can I get the HP software for work especially the device Image works and if the work habit is that of some other software HP can send me to exercise these functions

  Hi CommentToday,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-80348-1&CC=US&DLC=en&LC=en&os=2093&Product=3986399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• OfficeJet pro 8600: cannot install the printer Officejet pro 8600 on work network using HP on Win10 software

  I've recently updated my Surface 3 pro to win 11.  I try to install my printer using the HP installation software.  He worked with Win 8.1. The software has never been able to detect my printer automatically but in the past I could enter the IP address and it would connect.  This isn't the case, when I select wired connection, it just never fails to give me the opportunity to enter the ip address.  I can install the printer with the help of the W11 Control Panel, but the features of scan if the HP (HP printer assistant) software does not work it is frustrating for me.  Help, please.

  Kind regards

  Michael

  I found the solution to this problem.  You just need to run automatic installation wired function twice and then it will ask for the IP address.  Once I did this and entered the IP address, it worked fine.  It must just be an option to start or appear after a failure.  I had to let it fail twice has been confusing.

  Michael

• do not install the software for PSC 2355 using windows 7

  Recently upgraded my system from windows XP to windows 7. The CD with the software indicates compatibility with Windows 98, Me, 2000 & XP. I tried to use it to install the software but received a message saying that it was not compatible.  Need help, is there a way to bypass the message version and install or adownload available for me to use the HP University?

  Hello Milliebee,

  Welcome to the Forums of HP Support! I see that you have recently upgraded your computer from Windows XP to Windows 7 and you want compatible software and download drivers for your HP PSC 2355 with the HP Director program.

  Now, because you're using a newer operating system with an old printer you install software and drivers by using the OS print driver, which means that there is no download available, but the driver was built into the operating system.

  To better understand, please have a look here: installation of the printer software in Windows 7 for a USB cable connection, regarding the HP Director, it is no longer available. You may be able to get some third party options that can be comparable.

  I hope this helps!

  Thank you

• I installed CC2015 first on my desk. Now I'm on the road, I can't use the software of my laptop My ID is not recognized. Help.

  I installed CC2015 first on my desk. Now I'm on the road, I can't use the software of my laptop My ID is not recognized. Help.

  You can use the CC as desktop application for up to 90 days as long as the CC is active & has no problem billing. You must connect once within 90 days to maintain the activation.

  Let's get further this issue at our office in response https://helpx.adobe.com/contact.html .

  Concerning

  Stéphane

• I have Adobe cc on my computer, I bought a laptop and you want to install the Adobe software. But I installed the software and I would like to use the trial version. How do I fix

  I have Adobe cc on my computer, I bought a laptop and you want to install the Adobe software. But I installed the software and I would like to use the trial version. How do I fix

  Hello

  Please follow the steps under https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Let us know if this was helpful.

  Thank you

• My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat. I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine. How can I go on the validation of the software not

  My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat.

  I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine.

  How can I go on the validation of the software now?

  Try contacting the Adobe Support via chat and ask them to reset your activations - don't ask more than that or they are likerly tell you to look on the forums for help (where no one can help with reset).

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  Hello

  Can you please follow the instructions below.

  1. Click on the link below and open Photoshop Elements download link.

  Note: We are not anything downloaded from the page of Photoshop Elements.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  2. then click on the link below and download the installer directly mentioned in step 2.

  • for windows

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/Win64/Lightroom_6_LS11.exe

  • for mac

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/OSX10/Lightroom_6_LS11.dmg

  
  

  
  You can run the installation file once the download is complete.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  Check this message: Re: "cannot save (file name) because the file is already in use or left pending."

• I downloaded and installed Photoshop CS4 on 19.04.2015 and used a trial version which is for 30 days. but after 3 days only, today when I opened up the software serial number is requested, after that I satisfied with the product that will be suitable for

  I downloaded and installed the trial version for 30 days of adobe photoshop CS4 and used but after 3 days IE today when I open the software, it asks the Sl.No, having satisfied myself what product will be well suited for me, so I'll buy the software. Please consider the question

  Even if CS4 is suitable for you.  CS4 is no longer marketed, so unless you can find a retailer with an older version full unsold CS4 or some who want to give up using Photoshop and sell their license and transfer it by Adobe for you, your out of luck with CS4.  Download a trial of CS6 if you want to be able to buy Photoshop perpetual version or a trial of Photoshop CC 2014.  Make sure what you're looking for CS4 ther is many scams on the web... If you find an agreement with a very good price, beware.

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• Why - jar option used to install software that is located in the executable jar file?

  Hi all
  I have a question, I have a generic installer that is used to install oracle weblogic 10.3 in unix (i.e., who is in the .jar extension) platform which is the executable jar file.
  
  To install this software that do use - jar installation option
  java-jar net_server < version > _generic.jar
  
  My question why we use - jar option of install or extract the software
  
  can any one clarify my doubts...
  
  Thanks in advance
  Aerts
  
  Published by: sumanth_abhi on January 27, 2009 23:50
  

• Can I use another PC Toshiba laptop with DVD/CD to install the software on NB200?

  I'll keep with Toshiba and just got a laptop - NB200 - 11 H. Can I use the DVD/CD on another PC reader Toshiba laptop to connect with the new book of loading the software on CD? I have access to a series of Satellite P35 and a much older Satellite S2800-500.
  Thank you very much for the thoughts and ideas - it seems exaggerated to buy an external DVD/CD drive.
  Kind regards
  Laurie

  Yes! On the laptop with DVD/CD player 'Right click' on the DVD drive in "My Computer" and go to the properties and enable sharing. Make sure your 2 computers are on the same network. On the NB200 in the 'My Computer' in address bar type \\yourcomputersname(the one with the dvd), and then open the folder called example. "D" assuming that your dvd drive is the D drive.

  Hope this has helped.

• try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html