El Capitan 10 BootCamp Windows does not restart in windows install

Similar Questions

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• El Capitan does not restart while updating

  El Capitan 10.11.3 trying to reboot the system to install 10.11.4. It closes all applications, there is only the trash and Finder icons in the Dock, but nothing happens.

  It is an opportunity to update to OS X without completely reinstalling the system? And why this is happening?

  Hi there bibimij,

  It seems that you install the 10.11.4 updated, but the computer does not restart on its own. There could be several reasons for something like that happening, but I'd first leave applications running when you run the update because there might be an application taking upward. If you are not sure whether or not you have closed them all, you can use Force Quit to quit any programs that may be running.

  Force a nearby application on your Mac.

  If this does not help, then I would then reset your PRAM:

  How to reset the NVRAM on your Mac.

  Test the issue once this has been reset. If she keeps going on although I would then start in safe mode so that some at the system level and hiding the kernel, as well as perform a disk check and repair if necessary.

  Try safe mode if your Mac does not end commissioning

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then exit the safe mode with a normal restart and test once more. Thank you for using communities of Apple Support.

• Try to install sp3, but when you restart windows does not restart

  I can't be in the updates because I think that I need sp3.

  I have sp3 on a flash drive and installed but when it

  says to restart it restarts, but windows does not restart.

  I am running windows xp2 and Ie 8.

  Hello

  You can check this link...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-wont-work-after-reinstall-of/6e0d639a-EC79-4296-866f-e337c4679f25?page=2

  ... I suspect that your situation may be the same as BonitaTennis.

  If not, please answer with the details of your PC and to know exactly what happens when "windows does not restart.

  Tricky

• Laptop does not restart. Shows cannot start windows

  Computer shows "Windows Error Recovery" and offers two options 'launch Startup Repair' or 'start windows normally '.  I did both and the computer does not restart.
  If I select "start windows normally" it returns to the screen allowing you to start two options and default settings for the "repair starting."  He then proceeds to system recovery options, but then restarts to the two options under the "windows Error Recovery".  It seems to be stuck in a loop.

  I removed the battery, etc. rebooted several times but seems to make no difference.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

  PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

  PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

  The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

  Thanks anyway

  Dave

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• XP does not restart in safe mode or any mode.

  clicked on "Download updates and shutdown". Morning then tried to reboot and XP does not restart in any mode. Continues to rerun initial time and again, go to the 'mode' screen for 25 seconds and then starts again.

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  And then, if your computer is still infested with hijackware, maybe the updates did not cause the problem? =>

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/fa39a531-b865-4de5-a0fd-2ddc075aacff

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• WAG354G does not restart

  Using XP Home Edition SP3 + all IE8 Inc. updates...   A couple of weeks at least, I discovered that WG354G does not, restart

  have you tried all sorts, repugnant a few to list everything I tried--would put everyone to sleep, (I'm good at that)!

  When I try to soft or hard, start using the WAG354G menus, I get the Linksys small box of connection - looks like a Windows, one asking for username and password, then I get a small white box empty upper left screen and another box Center login screen (plainish with white background) / gateway address / password that I come home who then fills with "Internet Explorer cannot display the page... »

  It's 3 times I have to enter user name and password, which always results in the little Linksys box Center login screen from filling up with "Cannot display page" IE8

  Tried to uninstall 3rd party software s Inc. firewall and reboot the PC, turn off the pop-up in IE8, the gateway address added to the trusted sites zone, tried to do with the scripts in the IE8 advanced settings, to the everythiing blockers

  .. .flashed unit until 1.0.1.11 in desperation - no difference.

  .. would be grateful for any ideas,

  Regards, Richard

  When you reset your router does not restore the backup file on your router to WAG. Make sure that you re - configure all settings of your router from scratch.

  Download Firefox or Google Chrome on your computer, then check if you can connect to your router configuration page and make the changes on your router or else you face the same problem. If the same problem persists then you can try to download the latest firmware on the linksys site and download the firmware on your router.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I have a dell laptop with a battery defective im trying to reinstall vista on it, but it does not restart when it just stops

  I have a dell Inspiron 1720 and im expected to receive a new battery. Im trying to reinstall windows vista on it with the power cable plugged in that the current farm has no power.

  When windows needs to restart as he repeatedly does what installation it does not restart it just stops, no matter which please confirm that Jose the fault of batteries.

  I have a dell Inspiron 1720 and im expected to receive a new battery. Im trying to reinstall windows vista on it with the power cable plugged in that the current farm has no power.

  When windows needs to restart as he repeatedly does what installation it does not restart it just stops, no matter which please confirm that Jose the fault of batteries.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turning-off-your-computer-properly

  http://support.euro.Dell.com/support/eDOCS/systems/ins1720/en/om_en/PDF/DT5494MR.PDF

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Win7: no restart does not restart, only to close

  My win7 installation does not reboot.

  I can start up,
  I can "run file check at the next reboot" and it checks good, but once check file completed, it says "windows will restart" and it just stops.

  I demarrer start upward, press DELETE and enter the bios. I hit 'quit without saving changes' in the bios, it stops, it does not restart.

  Can I use the Start button to stop, but if I hit the Start button and select restart, it stops.

  What's wrong?

  Update: it was the motherboard, shorting against the case

  (Early PM Initialization error code, extracted to ram as good)

  Thanks for the help

• It indicates a problem with your pc to restart, but it does not restart.

  

  I get this screen whenever I turn on my computer. It indicates a problem with your pc to restart, but it does not restart. it restarts only by its self if I click on stop down, so instead of closing, it restarts. I don't know how to solve this problem so if someone could help me that would be great.

  Original title: C:/Windows/MEMORY. DMP

  Thank you very much!

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  -Although they are the same bug verification, we have two different drivers, the origin of the problem. I'll discuss one both for ease of reading.

  1:

  BugCheck D1, {fffff980417c4f40, 2, 0, fffff880050324d8}

  1st argument is fffff980417c4f40 , which is the memory that has been referenced. Despite the memory be labeled as "invalid", it is really valid memory, but it is disabled on the swap file, so we cannot paginate it to 2/higher IRQL. Given we are at level 2 IRQL at time of the accident, the checked bug.

  3rd argument is 0 , which indicates a failure of the read as opposed to a write operation. In other words, that he was trying to read the memory, as opposed to write to it.

  2: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '1942faa8 fffff802' 6f4d2869: 00000000' 0000000 a fffff980 ' 417c4f40 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '1942fab0 fffff802' 6f4d10e0: 00000000 00000000' fffff980 '417c4ca0 00000000 00000000' fffff880' 1942fbf0: nt! KiBugCheckDispatch + 0 x 69
  "fffff880'1942fbf0 fffff880'050324 8 d: 00000000 ' 00000000 fffff880 ' 01e7957f 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff880'1942fbf0)
  fffff880'1942fd80 00000000' 00000000: fffff880 '01e7957f 00000000'00000000 00000000'00000000 fffffa80' 0a9a4230: tap0901 + 0x34d8

  ---------------------------

  2: kd > .trap fffff880'1942fbf0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 000000000000004c rbx = 0000000000000000 rcx = 000000000000032e
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880050324d8 rsp = fffff8801942fd80 rbp = fffff8801942fea0
  R8 = 0000000000000000 r9 = fffffa800a9a4230 r10 = 0000000000000002
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  tap0901 + 0x34d8:
  "fffff880 ' 050324 d 8 83bba002000000 cmp     dword ptr [rbx + 2A0h], ds:00000000 0 ' 000002-0 =?

  On the statement, that blame us, we doesn't have a subtraction to one operand of the other to compare if the operands are equal or not to a pointer stored in rbx. The problem driver in charge of this statement was tap0901.sys , which is the driver of OpenVPN.

  2:

  BugCheck D1, {fffffa80197fffff, 2, 1, fffff88006670927}

  1st argument is fffffa80197fffff, which is actually an invalid address.

  3rd argument this time also is 1 , which indicates a failed to write to this address.

  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff801'2f95b688 fffff801 308 c 6869: 00000000' 0000000 a fffffa80'197fffff 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff801 '2f95b690 fffff801' 308c50e0: 00000000 ' 00000001 fffff801 ' 2f95ba58 fffffa80 '106fe000 fffff801' 2f95b7d0: nt! KiBugCheckDispatch + 0 x 69
  ' fffff801'2f95b7d0 fffff880'06670927: fffff801'2f95ba58 fffffa80 ' 107000 d 8 fffff801 ' 2f95bc30 00000000' 00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff801'2f95b7d0)
  fffff801 '2f95b960 fffff801' 2f95ba58: fffffa80 107000 d 8 fffff801 '2f95bc30 00000000' fffff801 00000000' 2f95bc30: bckd + 0 x 2927
  fffff801'2f95b968 fffffa80 107000 d 8: fffff801'2f95bc30 00000000 00000000' fffff801 '2f95bc30 fffff801' 2f95ba00: 0xfffff801'2f95ba58
  ' fffff801 '2f95b970 fffff801' 2f95bc30: 00000000 ' fffff801 00000000 '2f95bc30 fffff801' 2f95ba00 fffff801 ' 2f95ba58: 0xfffffa80 107000 d 8
  fffff801'2f95b978 00000000' 00000000: fffff801'2f95bc30 fffff801 '2f95ba00 fffff801' 2f95ba58 00000000'00000206: 0xfffff801'2f95bc30

  ---------------------------

  0: kd > .trap fffff801'2f95b7d0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = fffffa80197fffff = 0000000000000000 rcx = 7e2d6c3d0a970000
  RDX = rsi 0000000000000008 = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88006670927 rsp = fffff8012f95b960 rbp = fffffa80107000d8
  R8 = 0000000000000065 r9 = 0000000000000001 r10 = fffff8012f95bc30
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl nz na po nc
  bckd + 0 x 2927:
  fffff880 ' 06670927 c60000 mov byte ptr [rax], 0 ds:fffffa80' 197fffff =?

  The statement, that blame us, we could not move a pointer that has been stored in the rax register. Rax has the wrong address in the 1st argument, which is fffffa80197fffff. The problem driver in charge of this statement has been the K9 web parental filter driver.

  ---------------------------

  So, what's the problem here? The problem is the way you have too much security going on and there are conflicts that occur.

  You have AVG safe Search + K9 + Norton web filter. Delete the first two and all should be well your VPN should no longer be crashing.

  If accidents continue, throw too Norton and replace it with Windows Defender for now. FWIW, I would never install Norton on my own home systems... I see it cause a lot of daily problems.

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• I've just updated to el capitan. But protools does not work. How can I fix it?

  I've just updated to el capitan. But protools does not work. How can I fix it?

  Probably that Protools must be made day/upgrade. Have you checked for updates/upgrades?

  What version of Protools do you use?