El capitan ethernet does not

I fixed the problem with the Ethernet works do not with el Capitan.

The article on the Daily News Support Apple Mac will work, but first of all to note three very important things so that it works.

1. you use the Admin account

2. even if you have "Kernel Extension Configuration data incompatible." 3.28.2, the latest version, do not despair and run the command again.

3. the command, a parameter is missing.

Run it like this:

software update for sudo - background

Then once you exit Terminal and restart your Mac. Check 'about this Mac'

Access to the reporting system

Look at the Ethernet cards under hardware and it should display the Ethernet card information.  (Before he said, there is no ethernet card).

This should solve the problem.

Disconnect the Wi - Fi connection and reconnect the ethernet cable and it should be brought back online.

ing-recently-follow-these-steps-to-resto http://MacDailyNews.com/2016/02/28/if-your-Macs-Ethernet-connection-stopped-work...

Thanks Susana30, that seems very useful.

I actually never finished by having the problem and simply followed the wire where it happened.

Once again, thank you for sharing.

Tags: Mac OS & System Software

Similar Questions

  • USB ethernet does not work after update to Mac OS sierra

    Hello

    I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

    Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

    Please advise and thanks in advance.

    Do you use the Thunderbolt Apple > Ethernet card?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    The adapter works in recovery mode?

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • Z460, Ethernet does not work after wakes up after hibernation

    Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

    Thanks for reading!

    try reinstalling power management, the default settings of the bios and also try this:

    Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

    Restart your computer and check if it works.

  • Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

    I got a new motherboard under the vices, but now the ethernet does not (rj45).  I tried several drivers of other work say but it isn't on mine.

    Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.

    I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.

    Anyone have an idea when else I can do?

    I can't understand how a company like HP sends a non-working back unit after repair.

    If you had any driver installed for Ethernet before installing what I gave you...

    Then uninstall them all and also this driver which I gave you.

    Restart the system and reinstall this driver from me.

  • Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

    My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

    Hello

    go to dell and get the latest drivers for vista for your machine using one, you're on to get here

    Save the drivers for the flash player and then transfer them

    http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  • problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

    Hello guys,.

    I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

    The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

    I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

    I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

    Any suggestions?

    https://lh4.googleusercontent.com/_qDIDeytLvLA/TXJxhYNsHZI/AAAAAAAAFOI/9Vv056rj1RY/s800/Screen%20shot%202011-03-05%20at%2011.22.48%20AM.png

    The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

    C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

    You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

  • Maid in Ethernet does not

    Data sheet:

    • MacBook Pro (retina, 15 inch, mid-2015)
    • Intel Core i7 2.8 GHz
    • 16 GB 1600 MHz DDR3
    • 693 GB free on flash memory
    • El Capitan v. 10.11.3

    Problem:

    I wrote an e-mail, and he said that she had failed to save him. Tried to shoot to the top of Facebook, and it says that the page failed to load.

    I tried troubleshooting:

    • Wi - Fi œuvres
    • No two Thunderbolt ports work Ethernet, but both work for my secondary monitor adapter Thunderbolt.
    • Swapped cable Ethernet, no effect
    • Tried another port on the gateway, no effect
    • Tried the combinations above on the Macbook Air of woman and all work well (weird)
    • Network preferences show that my computer does not recognize the Ethernet Thunderbolt and impulsively I removed it from the list of networks on the left side of the preferences window, then it's gone now, and the computer does not appear something new when I unplug and plug again the Thunderbolt-Ethernet adapter.

    I can use WiFi, but I need the Ethernet connection for online classes, so I want to understand this one.

    Thanks for any help!

    If the Ethernet on your Mac has stopped working recently - Apple supports

  • El Capitan keyboard does not not after reboot

    I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

    After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

    I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

    Try again in Safe Mode.

    Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

  • LAN/Ethernet does not not but wireless is... Help, please!

    Good afternoon

    I have a HP Omni-220-1025 and had to have my hard drive replaced, since then that I couldn't go on the internet using the Ethernet setting.  My ISP is here to check the wiring of their place to make sure, and the technician told me that I was missing these drivers.  Not very tech savvy (that I am learning) but I can't seem to understand this.

    Any help will be greatly appreciated.   P.S. The computer also has BEATS Audio which does not work as well... it seems that drivers were not resettled... Just me thank you hike...

    Any time!

  • Dynadock U3 - Ethernet does not - send/receive flashing every 3 seconds

    My wife uses a Dynadock with a spectrum of XP.
    Ethernet worked fine when I first put in place, but I just noticed the wired connection does not work (only works with wireless).

    Send & receive lights on n/w Dynadock port flash every ~ 3 seconds, the Windows port & alternate state between Enabled & cable disconnected.

    Not sure how long the wired connection has not worked, but my scale did spend a couple of months to Win 8.1. At the time I had upgrade the drivers to get the video via the Dynabook work. I checked & Win network drivers have been also upgraded in this framework.

    Have seen a few other posts on uninstalling/reinstalling the drivers (done) & case where the icon network in the device driver has a warning '?' (says "device is working properly" in my case).

    Recommendations, or suggestions for a further diagnosis?

    Hello
    In my view, the question appears due to the update system 8.1 Win.
    You will need configure the network in the network adapter properties:
    To connect to the network via an Ethernet network cable, connect one end of a network
    cable to the Ethernet (RJ-45) the dynadock port and the other end to your network for the great
    performance of network access.

    To set the properties of the network to the Ethernet adapter:
    8.1 Windows, move the mouse pointer and click the icon at the bottom left of the screen to go to the
    Apps for display and then click on Control Panel-> network and Internet-> tasks-> change map settings and display the status of network.

    In the network connections folder, double-click the icon of the s dynadock Ethernet adapter connection.
    which is indicated by dynadock Ethernet. This will open the local area network connection properties window for you
    Configure network settings as required depending on your network environment.

    Note: The icon to connect to the Local network in the system tray/Notification area does not show a connection. Open network connections to display the Ethernet connection.

    I also found another thread on the same topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70771

  • Solitaire T please help! Update of El Capitan: Bootcamp does not start

    I have a MacBook Pro with a bootcamp Windows 7 partition. Windows 7 was working fine until I upgraded Mac OS 10.7.5 to 10.11.3 El Capitan. Now, the Windows 7 partition does not appear in system preferences > boot floppies or hold down the option key at startup.

    I tried your steps to Re: [help] can't start Windows (8.1) after resizing partition

    In my case, I installed gdisk and set the partition 4 (Microsoft Basic data) is bootable. Saved and has written the MBR, restarted the laptop, hold down option and still no display HD windows up to start from. Even tried to set all 4 partitions (i.e., recovery, EFI + Mac + Windows) to be bootable. Still does not work. Mac OS X system preferences > boot floppies does not display the windows partition. DiskUtility in Mac still shows the windows partition (~ 374). The drive is ~ 500G.

    Trying not to panic, but afraid to lose all access to the windows partition. Any help or advice are appreciated.

    Here is a list of commands from another article which seemed to help (commands entered in bold):

    Disk Util list


    Last login: Fri Mar 18 13:35:46 on ttys000

    Rented-c02g63qadrjm: ~ list of the Egan$ diskutil

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 500,1 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage Macintosh HD 125.0 GB disk0s2

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: Microsoft data base 374,2 GB disk0s4

    / dev/disk1 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh HD GB + 124.6 disk1

    Logical volume on disk0s2

    95C9BA16-04DB-45FE-B56D-7D8794B5D407

    Unencrypted

    Rented-c02g63qadrjm: ~ $ Egan

    Cs diskutil list


    Rented-c02g63qadrjm: ~ list of cs Egan$ diskutil

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group 018660F0-AA71-475D-B7D8-FF318EF9F765

    =========================================================

    Name: Macintosh HD

    Status: online

    Dimensions: 124999999488 B (125.0 GB)

    Free space: 18915328 B (18.9 MB)

    |

    +-Physical volume 024FC6AC-8287-4D93-A14C-2C6F4A71B64C

    | ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 124999999488 B (125.0 GB)

    |

    +--> Logical volume family 6E4C150A-017D-4F6F-BB2C-730CDBF75500

    ----------------------------------------------------------

    Encryption type: no

    |

    +--> Logical volume 95C9BA16-04DB-45FE-B56D-7D8794B5D407

    ---------------------------------------------------

    Disc: disk1

    Status: online

    Size (Total): 124628762624 B (124.6 GB)

    Reversible: Yes (no required decryption)

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    Rented-c02g63qadrjm: ~ $ Egan

    sudo TPG - vv - r see the/dev/disk0

    Rented-c02g63qadrjm: ~ Egan$ sudo TPG - vv - r show/dev/disk0

    Password:

    See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

    See the TPG: / dev/disk0: MBR suspicious to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 976773167

    start index size summary

    0 1 MBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 244140624 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

    244550264 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    245819800 1640

    245821440 730951680 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    976773120 15

    976773135 32 table dry GPT

    976773167 1 dry GPT header

    Rented-c02g63qadrjm: ~ $ Egan

    sudo fdisk/dev/disk0

    Rented-c02g63qadrjm: ~ Egan$ sudo TPG - vv - r show/dev/disk0

    Password:

    See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

    See the TPG: / dev/disk0: MBR suspicious to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 976773167

    start index size summary

    0 1 MBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 244140624 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

    244550264 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    245819800 1640

    245821440 730951680 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    976773120 15

    976773135 32 table dry GPT

    976773167 1 dry GPT header

    Rented-c02g63qadrjm: ~ Egan$ sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 0 0 2 - 0 0 40 1-39] < unknown ID >

    * 2: EF 0 0 41 - 25 127 14 [40-409600] < unknown ID >

    * 3: AF 25 127 15 - 1023 254 63 [409640-244140624] HFS +.

    * 4: AB 1023 254 63 - 1023 254 63 Boot Darwin [244550264-1269536]

    Please rebuild your MBR using 2-3-4 and say yes to good EFI for issue of grub. The current MBR is not going to work, because there is no entry for GPT4. Please let me know if you need the exact steps.

    The link you have used is a special case where a use has created a 'extra' partition, so we use a 3-4-5, but your case is standard configuration with 2 3 4A partitions of the hybrid.

  • HP15-d103TX: Lan Ethernet does not

    My ethernet doesn't work does not correctly. When connect my lan port while the red and white flashing lights but a few times it won't. That day that I check my ping status and it shows application expire or host unrecheable etc. But another computer works well. HP support (per call) say that it is a driver problem, so I check dirver but not driver for my laptop. If my request to fix this...

    Thank you

    CECILE MAZUMDAR

    Hello:

    Page of product for your laptop specification indicates that there is a Realtek 10/100 ethernet card.

    You can use the W10 directly from Realtek ethernet driver and see if it works.

    2nd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Apple TV 4 ethernet does not

    Hi all

    My ATV4 has played since a week or so, whenever I wake up to play Netflix or something like that has no internet connection. I had to restart in the settings menu and then I go back to the Internet.  Works great no problems until what he iron so no internet connection until I restart again in the settings menu.  Previously and again, he was impeccable on Ethernet and WIFI.

    Today, after all, an alarm clock, it does not connect via Ethernet cable.  I just tried.

    • change ports on the modem
    • change the well-known Ethernet cables and a brand new
    • Restore via iTunes
    • EU WiFi works, works very well after waking from sleep, just used Ethernet...

    Nothing runs no Ethernet works now.  WiFi is great and no problems.  Now if I plug in the Ethernet it doesn't show in the menu network after a reboot, then if I unplug the Ethernet cable connection in the menu said "Ethernet" won't get far (although the cables are disconnected). My wifi will not come until I restart the ATV...

    Is this a known problem or broken inside Ethernet gadget?

    See you soon

    125AT greetings,

    Thank you for using communities Support from Apple!

    If I understand your question your Apple TV (4th generation) is having some problems stay connected to internet when connected via ethernet, but no problems when connected via Wi - Fi. I also see that you have made some amazing troubleshooting already, including restoring with iTunes.

    To move forward, I suggest you make an Apple Store or send to Apple for the assessment. Information on these options in the following link.

    Apple - Support - Service Response Center

    Best!

  • Impossible to install El Capitan Mediakit does not enough space on the device

    Impossible to install El Capitan - dialog says:

    MediaKit does not have enough space on the device for the requested operation. I have a 250 GB with 53,99 GB available HD. Has anyone else had this problem?

    This procedure is a diagnostic test. It makes no changes to your data.

    Please triple - click anywhere in the line below on this page to select:

    { diskutil list; echo; diskutil cs list; } | pbcopy

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Launch the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

    Wait for a new line ending with a dollar sign ($) below what you entered.

    The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

    The Terminal window does not display the output. Please do not copy from there.

    If any personal information appear in the output, anonymize before posting, but do not remove the context.

  • X 51 R2 Ethernet does not not after update to the last W10

    So my Windows 10 upgrade works really well, but after the update (may be a coincidence) the Ethernet port no longer works.

    If I go to Device Manager there is no warning. I did the W10 check for update of the driver but there was nothing.

    I swapped autour cables with my Smart TV and he is always able to access the internet, so it is not the cable or switch.

    I booted up a Live Ubuntu disc and it has been able to access the Internet by Ethernet so I guess this isn't a hardware problem.

    I rolled back to Windows 8.1 and it still does not work, so at this point, I guess the update knocked out using some driver Ethernet the X 51.

    I do not have any third-party antivirus installed, just everything what comes with Windows 8.1/10.

    Anyone else does?

    Well duh. When I got to Windows 8.1 I don't check the Device Manager. Of course after the deactivation and reactivation of the Ethernet card it works.

    So, I guess that if someone finds this - here's how to fix your Ethernet if the W10 update knocked out the last two days.

Maybe you are looking for