El capitan installed can stop now not computer

Similar Questions

• After that 16 updates have been installed (most important) now my computer is running slowly and stalls, takes to always load anything... What is going on?

  I had 16 updats that microsoft said was important... OK update all now my computer runs very slow and short freezes... was working fine until it updates?

  Hi Valerie Krueger,

  Welcome to the Microsoft community. Looks like that after that the updates have been installed, the computer is running slowly. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  Method 1.

  Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/en-us

  Method 2.

  How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=ke2GRxcvRz-

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx#fbid=p871fE9bGeH

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• I installed El Capitan 11.5 and now my computer turns

  Hello

  I installed the latest update of El Capitan on my imac and now it will not be closed so I need to keep off and hold power button. I've even left overnight during the closing down to see if he would subsequently, but it's not. I ran repair disk, and that did not solve the problem. Help!

  Thank you!

  Uninstall the driver from Wacom and software. Make sure that none of that Wacom is in the connection points.

  http://www.Wacom.com/en-us/support/FAQs/drivers-software/how-do-i-uninstall-a-Dr iver-on-mac-os-x

• How to get a license of Lightroom CS6 installed on a now-dead computer discount

  How to get a license from Reset to Lightroom CS6 installed on a computer of dead now?

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

• 23-1015 Pavilion: Pavilion 23-1015 installed windows and now not wifi

  I have a HP Pavilion while a 23-1015, he had some virus on it so I tried to restore the plant. Ended up having to reinstall windows 7 on it. He said that was not installed the driver for my network connections, so I downloaded the hp Realtek driver. Still no luck. It says device disconnected or broken. Wireless was fine until I have restore. Someone has an idea what is happening?

  Hello:

  I think you need this driver so that the wireless card to work... The Realtek driver is for the wired network adapter.

  This package provides the driver for Ralink Wireless LAN Card solutions in the supported models that are running a supported operating system.

  File name: sp58084.exe

• Hi I bought a new Mac book with el capitan and can not install my 4 C? My old computer was stolen and I can't remove the program from the old mac book

  Hi I bought a new Mac book with el capitan and can not install my 4 C? My old computer was stolen and I can't remove the program from the old mac book

  If you see an anomaly of counting activation, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and ask a county of activation reset.

  Otherwise, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .

• I installed creative cloud for Lightroom 6 trial and now my computer runs like an old lady of 90 with a market framework. It is clear, he can not cope, and I need to buy a new computer. How can I transfer the case to the computer again that I don't have

  I installed creative cloud for Lightroom 6 trial and now my computer runs like an old lady of 90 with a market framework. It is clear, he can not cope, and I need to buy a new computer. How can I transfer the case to the computer again that I did not yet?

  Please click the link for photography Software Digital | Free download Adobe Photoshop Lightroom CC trial

  .

  I hope this helps.

• the computer in the format 2, re-installed Acrobat 10, now I can not activate

  the computer in the format 2, re-installed Acrobat 10, now I can not activate

  Why?

  If you have reached your activation limit, disable a previous installation.  If you can do it is more, contact adobe support to reset your counter of activation: www.adobe.com/support/chat/ivrchat.html

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Original title: Original Windows XP cd.

  I have an original cd of Windows XP Home Edition with the product key for it and want to use it... but when I look at the disk, according to me, he said: "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Because Dell SLP, the restriction of similar model is not important. All that matters is the EULA and the fact that the two computers are Dells.

• Update Service Pack 2 is not installed, now my computer will not boot

  Hello. I recently tried to install the service pack 2 update on my computer. It did not installed. My computer is slow, so I tried restarting. It came with the screen that shows the updates are being installed. I kept the computer until it stops. When I turned it back on it would go to this same screen but with a message saying that the service pack was not installed correctly and that the computer is reverting changes. It will turn on / off power permanently. In an attempt to fix it, I managed to get in the log on screen and put in my password, but the minute I hit enter my computer started and closed the loop on endless. Anyone know what I can do?

  http://support.Microsoft.com/kb/949358/en-AU

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  The above lists some options including restoration/repair of the etc system.

• Log on: installed automatically updated, now I can not even log on my laptop

  Installed, updated automatically, now I can not even connect on my laptop, password is justifiable, but I'm locked up. It says something about the user profile.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the s

  Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the software in my future computer without purchasing another license that is to say with the same license that I bought?

  Yes, you can reinstall it on other machines, if you wish, without having to buy new.  A license allows for activating facilities on two machines and if necessary, you can turn off a machine in order to allow the activation of another.