El capitan was updated based on the printer locks
I have install the 10.11.4 updated to El Capitan. He destroyed the link with my Epson printer. It is a wired connection. Can not reinstall the printer link. Also, takes system preferences to always connect when click the icon of the printer/scanner and can not add a printer.
OS X El Capitan: reset the printing system
Tags: Mac OS & System Software
Similar Questions
-
INSERT or update based on the quantity and the description
I have a table of transaction known as ot_cut_detail based on who i need to update or insert into two tables that have missing information. There are two criteria, we must first check if the cut_ps_desc is as pl or not like pl, if the description of cut_ps_desc is as pl he will check and update or insert into ot_actual_dtl_pl, or else it will update or insert into ot_actual_dtl, to the corresponding cut_pm_code and cut_ps_code as act_pm_code act_ps_code ot_actual_dtl and act_pm_code_pl, act_ps_code_pl in ot_actual_dtl_pl, which can be found below. quantities to both ot_actual_dtl and ot_Actual_dtl_pl are located in each row.the test case is the following.
{code}
create table ot_cut_detail (cut_pm_code varchar2 (12), cut_ps_code varchar2 (12), cut_ps_desc varchar2 (12), the number of cut_ps_qty);
insert into ot_cut_detail (cut_ps_code, cut_ps_desc, cut_pm_code, cut_ps_qty) values ('1001 ', "A001", "HEA", 3);
insert into ot_cut_detail (cut_ps_code, cut_ps_desc, cut_pm_code, cut_ps_qty) values ('1002 ', 'A002', 'PL', 2);
insert into ot_cut_detail (cut_ps_code, cut_ps_desc, cut_pm_code, cut_ps_qty) values ('1003 ', 'A003', 'PL', 2);
create table ot_actual_dtl (act_pm_code varchar2 (12), act_ps_code varchar (12), the number of act_qty);
insert into ot_actual_dtl (act_pm_code, act_ps_code, act_qty) values ('1001', "A001", 1);
insert into ot_actual_dtl (act_pm_code, act_ps_code, act_qty) values ('1001', "A001", 1);
insert into ot_actual_dtl (act_pm_code, act_ps_code, act_qty) values ('1001', "A001", 0);
create table ot_actual_dtl_pl (actp_pm_code varchar2 (12), actp_ps_code varchar (12), the number of actp_qty);
insert into ot_actual_dtl_pl (actp_pm_code, actp_ps_code, actp_qty) values ('1002', "A002", 1);
-required output is as follows
-in the table ot_Actual_dtl
act_pm_code, act_ps_code, act_qty
' 1001', "A001", 1
' 1001', "A001", 1
' 1001', "A001", 1 - line last updated 1 since she was not corresponding to the amount of ot_cut_detail
-case 2
-by ot_Actual_dtl_pl
actp_pm_code, actp_ps_code, actp_qty
"1002", 'A002', 1
"1002", 'A002', 1 - inserted recording missing with balance Qty
' 1003', "A003", 1 -inserted recording missing with balance Qty .
{\code}
' 1001', "A001", 1 - line last updated 1 since she was not corresponding to the amount of ot_cut_detail
Update ot_cut_detail table with 0 whenever 0 or null comes (guess that there are relationships between these tables. So no need to check the data of wherther there or not) of the foregoing. Here's the update statement
Ot_actual_dtl ADO UPDATE
SET oad.act_qty = 1
WHERE NVL(oad.act_qty,0) = 0
;
After the update, there is a 0 in the table. So now you can insert the rows required for both the table. Here I first, I checked the corresponding record exists in ot_cut_detail or not. If is to insert into the table else insert into ot_actual_dtl_pl (assumes that registration will not be there with Qty 0 in the table ot_actual_dtl_pl). This is the insert all THE
INSERT ALL
WHEN the flag = "ACTP" THEN
IN ot_actual_dtl_pl (actp_pm_code, actp_ps_code, actp_qty) VALUES (pm_code, ps_code, ps_qty)
WHEN the flag = "Act" THEN
IN ot_actual_dtl (act_pm_code, act_ps_code, act_qty) VALUES (pm_code, ps_code, ps_qty)
WITH qry1 AS
(
SELECT ocd.cut_pm_code,
OCD.cut_ps_code,
OCD.cut_ps_qty,
OCD.cut_ps_qty - Sum (NVL(OAD.act_qty,0)) act_qty,
OCD.cut_ps_qty - Sum (NVL(OADP.actp_qty,0)) actp_qty
Of ot_cut_detail OCD
LEFT OUTER JOIN ot_actual_dtl ADO
ON ocd.cut_pm_code = oad.act_pm_code
AND ocd.cut_ps_code = oad.act_ps_code
LEFT OUTER JOIN ot_actual_dtl_pl oadp
ON ocd.cut_pm_code = oadp.actp_pm_code
AND ocd.cut_ps_code = oadp.actp_ps_code
Ocd.cut_pm_code GROUP,
OCD.cut_ps_code,
OCD.cut_ps_qty
),
qry2 (pm_code, ps_code, ps_qty, Qty, Flag) AS
(
Cut_pm_code SELECT pm_code,
cut_ps_code ps_code,
1 ps_qty,
1 qty
CASE WHEN (q1.act_qty <> q1.cut_ps_qty) THEN the 'ACT' ELSE "ACTP" END flag
OF qry1 q1
WHERE q1.act_qty<=>=>
AND q1.act_qty <> 0
AND q1.actp_qty <> 0
UNION ALL
SELECT q2.pm_code,
Q2.ps_code,
Q2.ps_qty,
Q2. Qty + 1,
flag
OF qry2 q2, q1 qry1
WHERE q2.pm_code = q1.cut_pm_code
AND q2.ps_code = cut_ps_code
AND q2.qty + 1 <= case="" when="" (q1.act_qty="">=> <> q1.cut_ps_qty) THEN q1.act_qty ELSE q1.actp_qty END
)
SELECT q2.pm_code,
Q2.ps_code,
Q2.ps_qty,
Q2. Flag
OF qry2 T2
;
You must follow two steps.
Step 1:-update the table with 0 (1st update statement)
Step 2:-once the update is finished, insert into table using INSERT ANY State.
-
I'm having a problem with my printer does not print. What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again. The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print. Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print. I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed. I uninstall not uninstall printer functionality and not the Add/Remove Control Panel. Uninstall from the control panel would solve this problem? Please notify. Thank you, John
Hi sockers,.
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. do you have security software installed on the computer?
4. you receive an error message when printing?
I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/
If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.
-
The Master Table column updated based on the sum of column Table detail
With the help of JDev 11.1.1.6.I have a master-detail table based on a link to BC.
The main table has a column that displays an InputText or an OutputText, based on the value in another column.
If the InputText is displayed, the user can enter a value and the database will be updated with that value.
If the OutputText is displayed, it must be a sum of a column in the secondary table. Also, this value will be written in the database.
Question:
How can I fill the OutputText in the main table with the sum of the values in a column in the secondary table?
The detail table column is a manually entered InputText field.
Thank you.
Create a spike in the main table and write in its expression as follows - DetailVoAccessorName.sum ("ColumnName");
This will calculate the sum of column table detail and then you can set the value of the transient attribute to attribute DB on backup operation
Ashish
-
To have a printer brothers for a while... until yesterday would not connect to the pc for scanning.checkedd connections programming.
HI Milton,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, you are having problems with the printer connected to the computer.
1. What is the model of the Brother printer?
2. don't you get error message when the printer is not connecting to the computer?
Run the printer Troubleshooter and check if that helps.
Open the printer Troubleshooter
Answer to us if you are having problems with connecting to a printer or any other problem of Windows, and we would be happy to help you.
Good day!
Hope this information helps.
-
Hi, JTA,.
Suggest you follow the steps below:
- Quit and restart Photoshop
- Open a file to print
- Go to the file menu > print hover over with your mouse and hold down the SPACEBAR > This will open the menu print and resets the print Photoshop preferences.
Kind regards
Claes
-
BIOS updated after uninstalling the printer software, now Win7 does not! Help!
I just uninstall software ago 2 nights for my Officejet HP8500 and after reboot, I was invited to the update of the BIOS (?). After that it ran its course, I can not get Windows to load. it freezes at the home screen after entering my password.
Help, please. I have nothing but uninstall the HP software and reboot (which she asked me to do).
Hello
(1) once the unit is on keep tapping F8 key control if unit loads in safe mode try to do a system restore.
(2) if the unit will not charge at F8, you can try to load to F11 option also and try to restore the system here as well.
(3) if unit is not loasd to two option please try F10 or F2 option run the hard drive & memory test and let me know the results.
-
Update based on the max value of different tables.
{code}
create the table rule_table (number rule_id);
insert into rule_table values (10);
insert into rule_table values (20);
insert into rule_table values (30);
insert into rule_table values (40);
create the table auth_table (number of auth_id, rule_id number);
insert into auth_table values (1000, 10);
insert into auth_table values (2000, 10);
insert into auth_table values (3000, 10);
insert into auth_table values (4000, 20);
insert into auth_table values (5000, 20);
insert into auth_table values (6000, 30);
insert into auth_table values (7000, 30);
insert into auth_table values (8000, 40);
insert into auth_table values (9000, 40);
create the table pay_table (pay_id number, auth_id number, pay_indicator number);
insert into pay_table values (11111, 1000, 0);
insert into pay_table values (22222, 1000, 1);
insert into pay_table values (33333, 1000, 0);
insert into pay_table values (44444, 2000, 0);
insert into pay_table values (55555, 2000, 1).
insert into pay_table values (66666, 2000, 0);
insert into pay_table values (77777, 3000, 0);
insert into pay_table values (88888, 3000, 0);
insert into pay_table values (99999, 4000, 0);
insert into pay_table values (111111, 4000, 0);
insert into pay_table values (222222, 5000, 0);
insert into pay_table values (333333, 5000, 0);
insert into pay_table values (444444, 6000, 0);
insert into pay_table values (555555, 7000, 1);
insert into pay_table values (666666, 8000, 0);
insert into pay_table values (777777, 9000, 0);
insert into pay_table values (888888, 9000, 1);
create the table rule_pay (rule_id number, pay_max_indicator number);
insert into rule_pay values (10, 0);
insert into rule_pay (20, 0) values;
insert into rule_pay (30, 0) values;
insert into rule_pay (40, 0) values;
{code}
My intention is:
for every find of rule_id on the maximum pay_indicator (tables 3 query to get the max Show pay_indicator below) and on the other table I have to update this value max based on rule_id.
with max_tab
as
(
Select a.rule_id, max (pay_indicator) pay_indicator
rule_table a.,
b auth_table,
c pay_table
where a.rule_id = b.rule_id
and b.auth_id = c.auth_id
A.rule_id group
)
Update rule_pay
Set pay_max_indicator = (select max_tab.pay_indicator
of max_tab
where max_tab.rule_id = rule_pay.rule_id)
where
rule_id in (select rule_id from max_tab);
The above query does not.
Any help or suggestions are greatly appreciated.
Something like that?
SQL > select * from rule_pay;
RULE_ID PAY_MAX_INDICATOR
-------------------- --------------------
10 0
20 0
30 0
40 0
SQL > fusion in rule_pay PR
2. using (select a.rule_id, max (pay_indicator) pay_indicator
rule_table 3A,
auth_table 4 b,
pay_table 5 c
6 where a.rule_id = b.rule_id
7 and b.auth_id = c.auth_id
Group 8 by a.rule_id
9 ) u
10 on (u.rule_id = rp.rule_id)
11 when matched, then update
12 set rp.pay_max_indicator = u.pay_indicator
13;
4 lines merged.
SQL > select * from rule_pay;
RULE_ID PAY_MAX_INDICATOR
-------------------- --------------------
10 1
20 0
30 1
40 1
BTW, you can't put a WITH clause before an update. It can only precede a select statement.
-
HP ENVY B9959A number 5640: updates downloaded by the printer itself?
10 Windows on HP Compaq 6710 b tries to download a software update, released in August 2014 and install it on the HP Envy which continues to fail.
I think I saw on the screen of the desire that an update has been installed. Download envy itself updates and how to determine if this has happened in the right way?
With respect,
Piedro
#He requesting a fool for five minutes, one who does not request is a fool forever # Chinese proverbHello
Unfortunately not. You can see now and can be check next month or year next to see the differences. It shows the version of the firmware, but NO date.
Kind regards.
-
Update based on the missing values
Hello
I'm new to sql, attempted to retrieve results for the below scenario, but not able to do. Please let me know how I can do this.
I created the sample data below
create table id_data_upd (ID, ID_EXT, ID_VER) as
Select '12', '123', 1' Union double all the
Select '12', '345',' ' of all the double union
Select '12', '446', "of all the double union
Select ' 21 ', ' 2156', "of all the double union
Select ' 22 ', ' 2346', 1' Union double all the
Select ' 22 ', ' 2846', '0' of all the double union
Select ' 22 ', ' 3456', '0' of all the double union
Select ' 32 ', ' 4512', 1' Union double all the
Select ' 33 ', ' 4942', '0' of all the double union
Select '33', '5639', '0' double;
My data source is
ID ID_EXT ID_VER 12 123 1 12 345 12 456 21 2156 22 2346 1 22 3456 0 22 32542 0 32 4512 1 33 4942 0 33 5639 0 I'm trying to update the data for power two conditions
(1) If for the same id, there are a several ID_EXT and also check if the ID_VER = 1, then all other documents with this ID the ID_VER should be updated 0
(2) if there is a single record ID with ID_EXT unique with on no matter what ID_VER must be updated to iD_VER as 1
Data in the target after updates
ID ID_EXT ID_VER 12 123 1 12 345 0 12 456 0 21 2156 1 I tried the County of ID_EXT (having count (ID_EXT) = 1), but records that should not be coming are also coming.
Please tell me how I can do this.
Best regards and thanks,
Quentin
Hello
Try this
4d68a426-e5d3-4f8c-A933-bb16364ea560 wrote:
Hi Frank,.
I expect the output as below.
ID ID_EXT ID_VER 12 123 1 12 345 0 12 456 0 21 2156 1 22 2346 1 22 3456 0 22 32542 0 32 4512 1 33 4942 0 33 5639 0
Thank you
Quentin
with t as ( -- start sample data select '12' id, '123' id_ext , '1' id_ver from dual union all select '12', '345' , ' ' from dual union all select '12', '446' , '' from dual union all select '21', '2156' , '' from dual union all select '22', '2346' , '1' from dual union all select '22', '2846' , '0' from dual union all select '22', '3456' , '0' from dual union all select '32', '4512' , '1' from dual union all select '33','4942' , '0' from dual union all select '33', '5639' , '0' from dual ) -- end sample data select id,id_ext,id_ver, case when row_number () over (partition by id order by id_ver desc nulls last) > 1 then '0' else nvl(id_ver,'1') end new_id_ver, nvl(case when row_number () over (partition by id order by id_ver desc nulls last) > 1 then '0' end,'1') maybe_new_id_ver from t
-
Updated based on the value of another check box a box
We have a business rule that you have to follow.
If the checkbox "Commit" is checked, then the "Preview" box should be checked.
We want to handle this through workflow. Here is what we have done so far
Workflow rule condition: FieldValue ("< bCommit_ITAG >" ") ="Y ".
Action: Field Update - domain name * is set to forecast
Value: [< prediction >] = 'Y '.
Thanks for the helpBrian,
What you wrote should work, try Value is set to:
= Yes. This must also be created in the Administration section under its not web services but the workflow, you'll get better answers.
see you soon
Alex -
HP G7010em was updated to include the webcam.
Hello world
I have a laptop G7010em that does not have a webcam mounted in series. Can I use parts of an another G7000 laptop computer series which has the webcam?
Also what parts would be needed because I have the webcam on ebay also brought a sceen cable including the cable bezel webcam and lcd screen, plugged in all, but windows 7 32 bit does not see a webcam at all. In Device Manager, I don't have a conflicks. Any advice would be helpful.
Thank you
OK, solved the problem. Wire directly to the usb port, works very well except that you can not use the port for something else. New amendment inserted one inside the laptop usb hub, so I still can't use the port.
-
I use the addon in my firefox toolbar to print an excerpt from the data of the Web site and then add it to a pdf file. Sometimes I'm distracted, then do not remember if I went through the process and print/added the page in the file. It would be useful if there was a way that the print preview window closes after printing which confirms that the process is complete. Thanks in advance.
You're right: print preview remains open until the licensee. As a person who is regularly using the ESC key to dismiss dialog boxes, I had not really noticed an extra step.
After a little research, it triggered a few times over the years (at least 2 identified bugs) but one was rejected immediately and the other has not attracted a serious debate since it was filed in 2006. I think that there are no secret switch in the software to do this.
-
HP Deskjet 3052 a e-all-in-one: update the printer software
I have I already know the answer to this question, but I'll ask anyway. I have a printer HP Deskjet 3052 J611G e-all-in-one has. My computer is running Windows 7 Home Premium. I want to upgrade to Windows 10, but the printer I have is not compatible. I look for updated software for the printer but can't find anything whatsoever. Is it possible to upgrade my printer software or am I condemned to buy a new printer?
Thank you for your time
Hello
Your printer is compatible with Windows 10. the drivers can be downloaded from this link:
Don't forget to click on the button to change, and then select Windows 10 in the selection of the BONE at the top.
Shlomi
-
Hello
I want to print wireless. I recently changed my router to a 4G one and a new internet provider. I need to enter the SSID of the router to the printer code so that it can join the wireless network and connect to my MacBook Pro. Initially when I bought the printer, I was able to connect wireless using a provided HP CD - this does not currently work with Mac OS X 10 El Capitan, even if I have loaded down the HP update drivers. The printer does not have a screen to change the SSID directly so I guess I have to change sort through my Apple laptop. I you'd be grateful if someone could help me
Clonfert
Greetings @Clonfert,
Thank you access the Forums from HP Support for extra support! I see that you want to configure the printer on the new wireless network. I will do my best to help you with this problem.
I have provided a few steps to set up the printer via an ad-hoc connection and then convert it into infrastructure. (your network) Since there is no HP software to run the wireless installation.
Click the airport near the upper right corner on a Mac.
Click on the HP printer in the list.
It takes about 3 minutes to connect.
Once you get a solid blue light on the printer, it is successfully connected.
You will not be connected to your network for a bit while we set up the printer on the network.
Print the configuration page to get the printer IPv4 address.
Open your web browser, type the IPv4 address for the printer (Safari).
This will load the Web built-in to the printer server.
We can now configure the printer on the wireless network.
Click on the networking, on the left side, click on Wireless, fill out your information for the network. (The network name SSID, set it to the infrastructure, enter your password and the encryption type)
Apply the settings.
Now back to the airport closest to the top right corner on a Mac and select the name of your network.
Just add the network printer on Mac now.
Click on the Apple.
Click on System Preferences, click Print and scan icon, then click on the + sign, then select the printer from the list, click Add. (you may need to click the drop-down list to select the printer name to add it in)
Test the printer.
If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!
Maybe you are looking for
-
IPhone 6 message icon will not appear unread message number
Hey,. When my iPhone6 receives a message, it appears on my screen locked, but say if I can skip it and come back later, I unlock my phone and the message icon shows no unread messages. If I open messages, there will be a list of the latest unread mes
-
measure with the two channels of the virtual bench simultaneously in labview, error 375903
Hi, I am trying two measurements simultaneously using two channels of analog input of the virtual bench. I chose the channel MSO 1 and 2 for the measures but I get error 375903 returned evewry time say the requested resource is reserved. I'm not unde
-
OfficeJet 4500 K710: error in installing driver for officejet 4500 K10...
Got to the installation of the driver for the officejet 4500 HP support K710... at first I thought it was a success, but later it says fatal error in installation... What can be the problem... the printer was given to me by a friend who emigrated abr
-
getting error while publishing the post...
one can tell me how to solve this problem make me eroor while publishing a message using stream.publish the answer is showwing an error... "user has not authorized the application to perform this action..." ... Please help me Thank you cordially yako
-
Original title: Twinkle I searched this but can't find anything that really seems to apply. When I play FreeCell it flickers and sometimes it flickers when I click and I select what's behind it on the desktop. I noticed recently that other things sp