El capitan will not 4300 HP printer print
El capitan don't print printer HP 4300 series
Hello jaman23,
Thank you for using communities of Apple Support.
I see that you have a problem with your HP 4300 printer. Without elaborating on what is happening, I refer to the following troubleshooting general printing.
OS X El Capitan: print troubleshooting
Best regards.
Tags: Mac OS & System Software
Similar Questions
-
For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?
Hello DavePerdue,
Thank you for your message. Click HERE for your driver from the HP website. It seems that it just took some time to get the driver online and available for download.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?
Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer
Kind regards
Mohit
-
El Capitan will not stop or restart.
El Capitan will not stop or restart.
My Macbookpro 2015 EL capitan will not stop or restart and hangs with a desktop wallpaper.
Any help?
If you have installed the Wacom software try to uninstall.
-
Trying to upgrade Snow Leopard to El Capitan. El Capitan will not install. Get the error message "failed to file system verify or repair. Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard). I tried reinstall and same results. (in fact made three times) I'm back to Snow Leopard 10.6.8... Any ideas what is happening.
Dealing with the corrupt downloaded in OS X
Dealing with the corrupt downloaded on OS X (2)
Download Mavericks cannot be verified also applies to Yosemite.
-
El Capitan is not found Epson printer cable
El Capitan using, I had my Epson unplugged for a week, finally plugged back in and restarted, has added a new driver from Apple, which seems to be the only choice and now he refuses to appear in preferences, printers and scanners. I tried to 'search' did not work. The printer is on, connected via USB on both ends, with a new driver, and it remains invisible to the computer. Ideas, or simple solutions that do not involve going to the Terminal and potchkeing around the code?
If your Mac do not see your printer or have the software for it
These steps can help if you tried to print from your Mac, but your printer does not appear in the pop-up menu printer, or your Mac displays a message that the software for your printer is not available.
- Make sure your printer is ready to print. Check for paper and other supplies and resolve any error lights or error messages. Check the printer documentation or contact the manufacturer if you need help with an error.
- If your printer is connected to the USB port of your Mac, unplug the printer.
- Your Mac software downloads for most printers automatically, is usually not necessary to install the software from the manufacturer of the printer. Always check the updates for you ensure that your Mac has the latest information on the printer.
- If your printer is not connected to your wired network, wireless networkor the USB port of your Mac, plug it back now.
- Open an item that you want to print, then choose print in the file menu.
Get help to solve the problems of printer on your Mac - Apple Support
and if it does not work
-
HP ENVY 4504: Micron WILL NOT GO BY PRINTER KODAK PREMIUM PHOTO PAPER 280 x240GM
My HP ENVY 4504 printer will not feed Kodak premium photo paper 240 gms through
Hello
First if you please the way you load photo first papers. Have you tried HP papers with the same thickness? Please check your loading process using the following Manual:
http://h10032.www1.HP.com/CTG/manual/c03784120.PDF
Kind regards.
-
I have a c4700 printer. It analyses, but it will not copy or print from the computer
I have a C4700 printer. Have no trouble scanning. It will be not copy or print from the computer. Please help me if you can.
I have a C4700 printer. Have no trouble scanning. It will be not copy or print from the computer. Please help me if you can.
Hello
You will have to contact HP support for this problem.
Make sure you have the latest drivers and software installed.
Printers and multifunction:
You can also ask this question on the HP Support forums.
Printers and all-in-one - HP Support Forum's:
http://h30434.www3.HP.com/PSG/?category.ID=inkjetOr, contact HP support.
Call Support and Service the customer of HP Officejet Pro 8500 has e-All-in-One Printer - A910a:
http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=4083969&x=5&y=14Concerning
-
Documents in the print queue will not cancel or print
I tried all the usual cancel, delete, turn off the PC, turn the printer off, turn them both off the coast of all etc.
Do or not. There is no test.
These directions will not work with Windows XP, but it's the right idea.
She also leaves a file .cmd lingering somewhere on your system.
I propose the following technique that works for all versions of Windows and will not let any .cmd persistent or other files on your system:
First to clear the print queue, you have to stop the print spooler service, and then remove all the jobs/print files pending.
You cannot delete all print jobs in queue so that the Print Spooler Service is running, so you have to stop first.
To stop the Print Spooler Service, click Start, run and enter in the box:
services.msc
Click OK to open the Services Applet.
Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
If the "Startup type" is not set to "Automatic", set the "Startup Type" field to "Automatic" If that is your desire (which now is the time to check it out).Do not try to start or restart the Print Spooler Service again...
Next. remove all updates pending upward and forward to printing from XP. If they do not print before, you will need to send them to the printer again once things are cleaned in service yet.
Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
C:\WINDOWS\system32\spool\PRINTERS
Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs. The folder must be empty when you are finished.
Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."Submit new failure of print jobs.
-
The printer is visible on the page computer & devices & also in the router configuration page, however during installation becomes 2/3 of the way through it asks you to choose the printer that you want to install and the printer is there and you click on it, then he asks how you want to install, wireless or directly connect with a cable to the router and you have chosen the cable the following page opens and a progress bar appears and it stops and says it can not a printer, then he ends by installing... its frusting because it leaves no driver in Device Manager and all other software it installs, does'nt work... Tried different configurations to install 7 times... No good must always uninstall it... You can buy a cd of HP for $10, but the version of the software on the cd was released in 2007. the 2009 version which you can download just will not work... Any suggestions... Please direct any replies on the forum, or personally to * address email is removed from the privacy * ... Thank you
Bob Starke
PS-4months have passed and several updates KB - took the risk and installed downloadede IE9, then ran an SFC... Still corrupt system files... Uninstalled it & presto - no file corrupted... Now the case #1165316803... have not yet heard back... Ho-hum...
Hello
- Have you tried to connect your printer manually (not through the router, but via a USB connection)?
The problem is related to the HP software. Then I suggest that you contact HP support for assistance.
-
Print job Photosmart 8180 will not delete. Printer error mode.
My 23 page stopped Mid-page print job short of 9 pages. I tired to restart that has not worked. I then went to cancel and he says that the deletion but it is not. It will not have any other impression. It says 1 document in Quebec and printer in error mode. How can I delete the job?
Hi Gingercoconut,
I see by your post that you are unable to delete the job stuck in the print queue.
I'll be happy to help you.I've included a URL to find out how to restart the print spooler and empty folder of spooling print to delete the job stuck in the queue. How to clear the current queue in Windows Vista & Windows 7.
You will need to go back and try and delete the task in the queue again.
If you're still having problems, then restart the computer.
What operating system do you use? How to find the Windows Edition and the Version on your computer.
I hope this helps.
Thanks for posting on the HP Forums.
Good day! -
Windows 7 Pro will not restart if printer on.
Hello
When you click Restart, Windows 7 Pro will not reboot with a printer hp (L7680 or C309a) turned on. The screen remains right on "Starting Windows". Windows continues to load after that whatever printer is turned on.
This problem just started. Never happened before. I could always click on restart without problem before.
Any help?
Hey joe_do,
I see that you have a problem with the sequence of starting your Windows 7 Pro computer when one of your 2 HP printers are turned on. How are these 2 printers connected to this PC?
Looks like that devices can be connected to USB and somehow the computer boot sequence put the emphasis for USB on the internal HARD disk.
Jason
-
Remote Desktop for Mac will not use the printer driver
On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.
I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) ServicesWe have tried to map the printer with an EPSONRedirect.INF file that contains the following:; EPSONRedirect.INF; Printer mapping file for drivers side client-side Server[Printers]"EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"No idea how we can fix this?[Transferred to the Windows forum by moderator]Hello
I suggest you to post the question on the following link:
-
Creative cloud would not let me print my images and after turn the pinion of the icon for 5 minutes and then gives me a default message, "could not complete your request because of a program error." I checked my memory usage and it seems to be more than enough such that the machine should not be grippements. This has happened several times today. Any suggestions on a fix?
Hi Ron,
Go to the file menu > hover your mouse over Print > press and hold the space key > This would call for zero Configuration printer Photoshop and open the print menu > check if you are able to print.
In addition, make sure that the your printer drivers are updated.
Kind regards
Claes
-
My blends in Illustrator CS4 will not save or print correctly. Why?
Why are my blends in Illustrator CS4 not save or print correctly?
TECHNICAL DATA:
Adobe CS4
MAC 10.5.8
I had a mix of text describes with a drop shadow. And another text with a drop shadow on top. Not too complex at all.
Here are a few screenshots of the problem.
(1) screenshot of adobe Illustrator
(1) screen shot of my saved TIff file. I recorded as a PDF as well and still no luck.
Any suggestions?
Provide screenshots of the aspect and layer panel and / or information on grouping. Stuff endangered means that the appearance is somehow twisted and that it is not made in the right order when exporting...
Mylenium
Maybe you are looking for
-
I have the problem with the crystal in my draft report, my project have some points of data, so for that I use the Publisher ck (third-party tool) and the display of the data in the crystal report but the alignments and the gaps in the line and tab s
-
Error C0000021a fatal system with a status of Xc0000005 (0x00000000 0x00000000)
I have an error as above... I too have tried alll but no luck... can someone help to... PLEASE
-
I can't download money microsoft light but why?
When I try to download it from netflix or microsoft, I get an error message saying that my pc is not 64-bit capable. my pc is the gateway vista edition windows Home premium 64-bit with sp1. I've always used my pc to stream Netflix using silverlight,
-
How can I remove the trojan:dos / alureon.a in Vista
How can I remove the trojan:dos / alureon.a in Vista
-
need to reinstall cs6 but cannot find trials only CC
HelloMy pc has been damaged and I lost all my files. I need to reinstall cs6 design and web premium. I have my serial number, but when I go to downloads on adobe I can only find the options to purchase or trial Adobe CC. Where the cs6? I never had di