El Capitan will not install. Window disappears after pressing the button install.

Similar Questions

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• ElliteBook 8460p will not be running when you press the Start button

  Hi Ant classmates.
  
  I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
  
  Thank you

  Hello Angelica,.
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• Visa read only works after press the button run

  Hi people.

  I have a weird problem here. When I run the vi and press the Start button that the serial port is read and in the rest of the program works very well. When it is finished and do it again there is no data series. I have to give up and re - run, then when I push the button to start the serial data are there. The end of the program is somehow the serial port to an unknown state?

  Thank you

  Select this option.

  You may have found an error in your devices.  and, since you do not have initiallize the shift register with the grouping of the IO Sessions and mistakes the SR will retain the error while the vi is in memory, unless you give up running (how the shift register will contain the default value).  Find the error

• Open a URL in a new window when you press the button

  Version: 4.1.1
  
  Hello
  
  Under the button options, we can set to redirect to a URL. However, the page opens in the current window. Is it possible to get it to pop open in a new window?
  
  Thank you
  Ryan

  You can include

  target="_blank"
  

  in your url.
  http://www.w3schools.com/tags/att_a_target.asp

  Or alternatively, you can use (replace the url - I use google for example)

  javascript:window.open('http://www.google.com');void(0);
  

• After pressing the button my XP sent me a screen with a long message about how he will start not harnessed. After that, it switches between this page and windows logo screen and no command works.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  Hi Gary. Is the message that you receive "Windows did not start successfully, a recent hardware change might have caused this?

  When you see this message you should be in the Advanced Options menu that is in Safe Mode, Mode safe mode with networking, last known good configuration ect... Using the top and the arrow keys on your keyboard scrolling to the last known good configuration work and then press ENTER. Let the computer ample time to start. If she does not always load windows restarts the computer. When the Advanced menu Options scroll mode safe mode with command prompt and press ENTER. Again, give time for windows to load. Command prompt window once charged will appear. Type or copy and paste the following command, and then press ENTER. Follow the prompts to perform a system restore.

  %SystemRoot%\System32\restore\rstrui.exe > press ENTER after you type or paste the command

• Home PC will not boot Windows Vista after updating sound card drivers.

  Okay, so I built a brand new pc last night. A worked like a charm, perfectly executed and all. Installed a new sound card, opened it and a few minutes put in my computer, install the drivers and had it works perfectly. Windows loaded perfectly, no problem at all anywhere. Then I'll update the drivers for the sound card, a large download but he finished. He was trying to install the drivers, then while he was, I've been on google chrome on facebook and then randomly, I lost the internet connection. My receiver wifi for my computer was fine and turned on and running great, but for some reason any my computer does not pick up a signal even if all my other devices don't. When the drivers have been installed and the updates are finished, I rebooted my computer.

  Problems from there. I turned the computer back and tried to boot windows, but computer science got to the vista loading screen and then resets. He made several times. So I tried to boot into the last known good configuration. I spent the loading screen, then a flashed blue screen with a bunch of words and he said something along the lines of "Windows has encountered an error", but disappeared in literally one second about. Then the computer shuts down. Since then whenever I try to start in windows, I don't yet get to the loading screen, any choice I use to try to start in windows, no work. When I choose one my computer just is a black screen. It loads the bios very well and everything works great but the OS is the question.

  Any suggestions?

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See if you have any installation DVD.

  Windows Vista download Recovery Disc
  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Have you tried running your machine in the Windows environment?  If you have an installation DVD that you can start (or an option of startup repair via the F8 Safe Mode screen), try running the command prompt, among the options provided when you walk down the path of the Startup Repair. Do not perform the Startup Repair, just pick up and go to the option to the command line (from to choose a recovery tool dialog box) and try to run Chkdsk C: /r from the.

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the restoration of the system to Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/

• Cloned VM will not match its files after changing the name, svmotion

  Recently, I've cloned a VM, lets say "server1" "clone server 1.  Once the original virtual machine has been removed, the full name of "server1 clone" has been renamed to "Server1."

  OK, generally, to match the files of the virtual machine to its full name, I have storage vmotion virtual machine data to another store.  (Directions: http://kb.vmware.com/kb/1029513)

  Well, that didn't work.  All the files still say 'server1 clone' hard, .vmx, etc etc.

  Running vSphere Enterprise Plus 5.  Is my only way to 'fix', that is to use the console?  Eeek...

  Furthermore, the virtual machine in question is our vCenter server.

  Thank you.

  Known issue: http://kb.vmware.com/kb/2008877

  / Rubeck

• HP DV9700 not start. Farm in seconds after pressing the button walk / stop.

  My HP Pavilion DV9700, who works under Vista, stopped working yesterday.  I never did at the Windows startup screen.  Messages on-screen messages which function key to press for configuration, see starting, etc...   then stops.
  
  It started a day ago. I don't think that windows is the question.

  I tried to hard reboot... blew compressed air into the power supply area... no change.

  Don't know what to try next.

  Thanks in advance for any help you can provide.

  Steve

  Had to take the machine a tech I know.  It was the motherboard.   Thermal paste had disappeared from the excessive heat of the CPU and GPU and the poor ventilation of the machine design.   Costly, preventable and unnecessary repairs... HP was worth investing in better design systemboard for their laptops and notebook computers.

  HP response... your notebook $ 1200 of the scrap and buy another... and they will add the warranty one year.

  They thought that 5-6 years I got my laptop has a long service life of the device.

  I was actually insulted by this response and doubt my next laptop will be HP.

  Thanks to those who have tried to help however.

• How to close the dialog box after pressing the button

  Hello. I added the button

  ButtonWidget

  (

  kButtonWidgetID,

  kSysButtonPMRsrcId,

  kBindNone,

  334, 434, 16, 16 + 24,

  kTrue, kTrue,

  kButtonLabelKey,

  ),

  and in my method in the file... Observer.cpp

  If (theChange is kTrueStateMessage)

  If (theSelectedWidget is kButtonWidgetID)

  This I want close dialogue

  How? I don't want to create CancelButtonWidget. It is must be cutom button.

  Try this in your dialogObserver,

  InterfacePtr myParent (this, UseDefaultIID());

  InterfacePtr ((IDialog*) myParent-> QueryParentFor (IID_IDIALOG)); dialog

  If the dialog box (dialogue)-> Close();

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• How to reset the LED after pressing the stop button?

  Hello

  I use vi of green LED to indicate if the data has been loaded correctly. However, if I run the same labview program several times online, then the Green LED is always on because "value that data has been correctly loaded" crashes it since the previous session. Is it possible to reset all of the screws LED after pressing the button STOP (stop labview program).

  Thank you for the answers.

  Hope this helps:

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!